Wraps by car

ORA Funky Cat wrap

The ORA Funky Cat wrap page covers one generation of this subcompact hatchback, produced from 2021 to now. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, expect to use about 64 ft (19.5 m).

1generations17.5 mof film for a full wrap

ORA Funky Cat, first generation, factory photo
ORA Funky Cat, first generation. Factory color shown.

ORA Funky Cat wrap colors and ideas

  • Funky Cat black wrap
  • Funky Cat white wrap
  • Funky Cat gray wrap
  • Funky Cat silver wrap
  • Funky Cat red wrap
  • Funky Cat blue wrap
  • Funky Cat green wrap
  • Funky Cat yellow wrap
  • Funky Cat orange wrap
  • Funky Cat purple wrap
  • Funky Cat pink wrap
  • Funky Cat teal wrap
  • Funky Cat brown wrap
  • Funky Cat gold wrap
  • Funky Cat chrome wrap
  • Funky Cat color shift wrap
  • Funky Cat carbon fiber wrap
  • Funky Cat camo and patterned wrap

How much vinyl to wrap an ORA Funky Cat

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowhatchback (5 doors)166.7 in (4,235 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Funky Cat wrap cost factors

Funky Cat wrap cost depends on the film type, the finish, and the condition of the paint. A color change wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for the standard finish. Chrome or patterned film raises the amount to about 64 ft (19.5 m). Preparation work on a subcompact hatchback that is 166.7 in (4,235 mm) long also affects the total.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Funky Cat wraps by generation

Swipe sideways. Tap a card for the full description.

ORA Funky Cat, first generation, factory photo
Factory color shown

2021–now Funky Cat hatchback (first generation)

2021–nowhatchback (5 doors)166.7 in (4,235 mm)

The first generation ORA Funky Cat offers a panoramic glass roof on some trims. That roof is not wrapped, so the roof stays dark whatever the color of the film. On those cars, the vinyl ends at the roof rails. Every trim has a tailgate with the rear glass in it, and the film stops at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Funky Cat

For a partial wrap on the ORA Funky Cat, the hood, mirror caps, and the roof on cars without the glass panel are good candidates. Funky Cat chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end is another option that uses clear film.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an ORA Funky Cat: body, cut-outs and film

The ORA Funky Cat vinyl wrap is a straightforward job on a small five-door hatchback that measures 166.7 in (4,235 mm) long. The short body means less film and fewer panels than a larger car. The tailgate includes the rear glass, so the film ends at the edge of the glass. Its subcompact size keeps the wrap time and material waste down.

Some Funky Cat wrap ideas need cut-outs for trim pieces on every version of the car. Parking sensors in the bumpers require the film to be cut around each sensor. Cameras in the body also need careful trimming around each lens. The charge port door is wrapped as a small piece of its own, with seams that follow the panel gap.

For how much vinyl to wrap a Funky Cat, this car has only one generation, so the film estimate stays the same for all years from 2021 to now. A full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 64 ft (19.5 m).

Questions about wrapping an ORA Funky Cat

How much vinyl does it take to wrap an ORA Funky Cat?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap an ORA Funky Cat. With chrome or patterned film, the amount rises to about 64 ft (19.5 m).

Can the roof of a Funky Cat be wrapped?

Yes, the roof of a Funky Cat can be wrapped, but only on cars without the panoramic glass roof. Some trims have a glass roof that is not wrapped, and the film ends at the roof rails. On other trims, the roof is a standard metal panel that can be covered.

Can I wrap only the hood or the roof of a Funky Cat?

Yes, you can wrap only the hood or the roof of a Funky Cat. A partial wrap can include the hood, mirror caps, and the roof on cars without the glass panel. For the roof, make sure your car does not have the panoramic glass roof.

Is a Funky Cat hard to wrap?

A Funky Cat is not especially hard to wrap, but it has details that add work. Every trim has parking sensors in the bumpers and cameras in the body, so the film must be cut around each sensor and lens. The charge port door is wrapped as a separate small piece. Its subcompact size of 166.7 in (4,235 mm) helps keep the job manageable.