Wraps by car

ORA Punk Cat wrap

The ORA Punk Cat wrap page covers the single generation of this five-door hatchback built from 2022 to now. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film jobs need about 74 ft (22.5 m) of the same width.

1generations19.5 mof film for a full wrap

ORA Punk Cat, first generation, factory photo
ORA Punk Cat, first generation. Factory color shown.

ORA Punk Cat wrap colors and ideas

  • Punk Cat black wrap
  • Punk Cat white wrap
  • Punk Cat gray wrap
  • Punk Cat silver wrap
  • Punk Cat red wrap
  • Punk Cat blue wrap
  • Punk Cat green wrap
  • Punk Cat yellow wrap
  • Punk Cat orange wrap
  • Punk Cat purple wrap
  • Punk Cat pink wrap
  • Punk Cat teal wrap
  • Punk Cat brown wrap
  • Punk Cat gold wrap
  • Punk Cat chrome wrap
  • Punk Cat color shift wrap
  • Punk Cat carbon fiber wrap
  • Punk Cat camo and patterned wrap

How much vinyl to wrap an ORA Punk Cat

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowhatchback (5 doors)187.0 in (4,749 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Punk Cat wrap cost factors

Punk Cat wrap cost depends on the amount of film and the time needed to wrap a 187.0 in (4,749 mm) five-door hatchback. A color change takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 74 ft (22.5 m). The charge port door and the glass-in tailgate add small, careful pieces that affect labor.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Punk Cat wraps by generation

Swipe sideways. Tap a card for the full description.

ORA Punk Cat, first generation, factory photo
Factory color shown

2022–now Punk Cat hatchback (first generation)

2022–nowhatchback (5 doors)187.0 in (4,749 mm)

The first generation of the Punk Cat is the only one built, from 2022 to now, as a five-door hatchback. Its 187.0 in (4,749 mm) length means a full wrap needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The five doors and the tailgate split the job into many small panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Punk Cat

On the Punk Cat, a partial wrap covers the roof, hood, or mirror caps. Punk Cat chrome delete changes the window trim and badges to black film. Paint protection film (PPF) is clear film on the front end for stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an ORA Punk Cat: body, cut-outs and film

The ORA Punk Cat vinyl wrap uses a moderate amount of film because the car is 187.0 in (4,749 mm) long with a five-door hatchback body. The five doors mean the film is split across more panels than a two-door car. Each door jamb and the tailgate edges add cuts that keep the wrap tight there.

Punk Cat wrap ideas start with the tailgate, which has the rear glass set into it, so the film ends at the edge of the glass. The charge port door is wrapped as a small piece of its own and is not cut out of the main panel. The door handles, badges, and mirrors are removed for a clean edge.

Anyone counting how much vinyl to wrap a Punk Cat should note that only one generation exists, so the film estimate stays the same across 2022 to now. All Punk Cat bodies are the same hatchback size and length of 187.0 in (4,749 mm). You can plan one figure for this car rather than comparing years.

Questions about wrapping an ORA Punk Cat

How much vinyl does it take to wrap an ORA Punk Cat?

It takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film to wrap an ORA Punk Cat. Chrome or patterned film needs about 74 ft (22.5 m) of the same width.

Can I wrap only the hood or the roof of a Punk Cat?

Yes, you can wrap only the hood or the roof of a Punk Cat. Partial wrap options include the roof, hood, and mirror caps.

Is a Punk Cat hard to wrap?

A Punk Cat is only moderately hard to wrap because of its size and a few details. The tailgate has the rear glass in it, so the film ends at the glass edge. The charge port door is wrapped as a separate small piece.

How many generations of the Punk Cat does this page cover?

This page covers one generation of the ORA Punk Cat, built from 2022 to now. It is the only generation of this five-door hatchback.