Wraps by car

Renault Sandero RS wrap

The Renault Sandero RS wrap page covers the subcompact hatchback built from 2015 onward in one generation. A full vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 61 ft (18.5 m).

1generations16 mof film for a full wrap

Renault Sandero RS, first generation, factory photo
Renault Sandero RS, first generation. Factory color shown.

Renault Sandero RS wrap colors and ideas

  • Sandero RS black wrap
  • Sandero RS white wrap
  • Sandero RS gray wrap
  • Sandero RS silver wrap
  • Sandero RS red wrap
  • Sandero RS blue wrap
  • Sandero RS green wrap
  • Sandero RS yellow wrap
  • Sandero RS orange wrap
  • Sandero RS purple wrap
  • Sandero RS pink wrap
  • Sandero RS teal wrap
  • Sandero RS brown wrap
  • Sandero RS gold wrap
  • Sandero RS chrome wrap
  • Sandero RS color shift wrap
  • Sandero RS carbon fiber wrap
  • Sandero RS camo and patterned wrap

How much vinyl to wrap a Renault Sandero RS

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowhatchback (5 doors)160.2 in (4,068 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Sandero RS wrap cost factors

The Sandero RS wrap cost depends on the film width and the amount needed, about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 61 ft (18.5 m), which raises the material amount. The subcompact body with its tailgate glass needs less disassembly than some cars, but the 2019 restyling affects which bumper and light cuts fit. Installer labour for a full wrap includes removing badges, mirrors, and lights before the film goes on.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Sandero RS wraps by generation

Swipe sideways. Tap a card for the full description.

Renault Sandero RS, first generation, factory photo
Factory color shown

2015–now Sandero RS hatchback (first generation)

2015–nowhatchback (5 doors)160.2 in (4,068 mm)

The first generation Renault Sandero RS was introduced in 2015 and remains in production today as a five-door hatchback. The 2019 restyling changed the bumpers and lights, so film cut for one version does not fit the other. The body length stays at 160.2 in (4,068 mm), so the same amount of film is used for either version. For a full wrap, you still need about 52 ft (16 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Sandero RS

A partial wrap on a Renault Sandero RS often covers the roof, hood, or mirror caps as a smaller job. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) in clear film can be applied to the front end for stone chip protection. These options use less material than a full wrap and can be done without wrapping the tailgate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Renault Sandero RS: body, cut-outs and film

The Renault Sandero RS vinyl wrap is sized around a five-door hatchback body that is 160.2 in (4,068 mm) long. This compact footprint keeps material needs moderate, with a full color change using about 52 ft (16 m) of cast film. The tailgate carries the rear glass, so the film ends neatly at the edge of the glass. A subcompact like this wraps efficiently without oversized panels.

Sandero RS wrap ideas start with the tailgate, where the film must end at the edge of the rear glass. The tailgate does not need extra cut-outs for glass, but the rear wiper and badges still require removal before wrapping. Door handles, mirrors, and lights are typical areas to disassemble for clean edges. A color change wrap can highlight the car's compact stance when panels are prepped correctly.

How much vinyl to wrap a Sandero RS changes only with the 2019 restyling, since there is one generation. Bumpers and lights changed, so film cut for a pre-2019 version does not fit a later car. The overall body length stays at 160.2 in (4,068 mm), so the film estimate remains about 52 ft (16 m). If you count film for chrome or patterned vinyl, allow about 61 ft (18.5 m).

Questions about wrapping a Renault Sandero RS

How much vinyl does it take to wrap a Renault Sandero RS?

It takes about 52 ft (16 m) of vinyl to wrap a Renault Sandero RS with 60-inch (1.52 m) cast film. This estimate covers the newest body style, the five-door hatchback. With chrome or patterned film, the amount rises to about 61 ft (18.5 m). The film ends at the edge of the rear glass, so there is no extra material for the glass itself.

Which years of the Sandero RS take the same film cuts?

The 2015–2019 Sandero RS and the 2019–now Sandero RS take different film cuts because the bumpers and lights changed in the 2019 restyling. All years are the same first generation, but pre-restyling and post-restyling film kits are not interchangeable. The body length stays the same at 160.2 in (4,068 mm), so the total amount of film is unchanged.

Can I wrap only the hood or the roof of a Sandero RS?

Yes, you can wrap only the hood or the roof of a Sandero RS as a partial wrap. Mirror caps are another common smaller job. A chrome delete is also possible for the window trim and badges. These options use less film than a full wrap, and the tailgate glass does not need to be wrapped.

Is a Sandero RS hard to wrap?

A Sandero RS is not especially hard to wrap, but the tailgate with the rear glass in it needs careful film placement at the edge of the glass. The subcompact size keeps panels small and manageable. The 2019 restyling means you need the correct bumper and light cuts for your car's version. Removing badges and mirrors adds extra prep work.