Wraps by car

Renault Sandero wrap

This page covers the Renault Sandero wrap for both generations of the subcompact hatchback. The newest body in the catalog is the second generation, produced from 2012 onward. A full wrap of that body takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film on the same body takes about 62 ft (19 m).

2generations16 mof film for a full wrap

Renault Sandero, second generation, factory photo
Renault Sandero, second generation. Factory color shown.

Renault Sandero wrap colors and ideas

  • Sandero black wrap
  • Sandero white wrap
  • Sandero gray wrap
  • Sandero silver wrap
  • Sandero red wrap
  • Sandero blue wrap
  • Sandero green wrap
  • Sandero yellow wrap
  • Sandero orange wrap
  • Sandero purple wrap
  • Sandero pink wrap
  • Sandero teal wrap
  • Sandero brown wrap
  • Sandero gold wrap
  • Sandero chrome wrap
  • Sandero color shift wrap
  • Sandero carbon fiber wrap
  • Sandero camo and patterned wrap

How much vinyl to wrap a Renault Sandero

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowhatchback (5 doors)160.6 in (4,080 mm) to 160.7 in (4,083 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2009–2014hatchback (5 doors)158.3 in (4,020 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Sandero wrap cost factors

Sandero wrap cost is set by the film amount, the film line, and the work the body needs. The newest body calls for about 52 ft (16 m) of 60-inch (1.52 m) cast film, and chrome or patterned film raises the amount to about 62 ft (19 m). Disassembly and cut-outs add labor, especially with roof rails or fog lamps on some trims. The age of the car also matters, because paint condition can change the prep work before the film goes on.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Sandero wraps by generation

Swipe sideways. Tap a card for the full description.

Renault Sandero, second generation, factory photo
Factory color shown

2012–now Sandero hatchback (second generation)

2012–nowhatchback (5 doors)160.6 in (4,080 mm) to 160.7 in (4,083 mm)

The second generation Renault Sandero changed in 2018 with a restyling that altered bumpers and lights. Film cut for a pre-2018 version does not fit a post-2018 version, so the shop checks the production year before cutting. Length stayed almost the same at 160.6 in (4,080 mm) to 160.7 in (4,083 mm), so the film amount does not change. Patterns for one restyled version are not reused on the other without adjustment.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Renault Sandero, first generation, factory photo
Factory color shown

2009–2014 Sandero hatchback (first generation)

2009–2014hatchback (5 doors)158.3 in (4,020 mm)

The first generation Renault Sandero was built from 2009 to 2014, and paint age is a real factor on cars of these years. Panels may be original or repainted, and a test spot comes before a full wrap to check adhesion. The body is a five-door hatchback at 158.3 in (4,020 mm), taking about 52 ft (16 m) of 60-inch (1.52 m) cast film. Repainted panels sometimes behave differently under film, so the shop tests each area before committing.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Sandero

A partial wrap on a Sandero can cover the roof, hood, or mirror caps without wrapping the whole car. Sandero chrome delete is a separate job that covers window trim, decorative moldings, and badges with black film. Paint protection film (PPF) is another option: clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and leave the rest of the body untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Renault Sandero: body, cut-outs and film

The Renault Sandero vinyl wrap follows a compact five-door hatchback body that keeps film use predictable. The newest generation measures 160.6 in (4,080 mm) to 160.7 in (4,083 mm) long, so panel sizes stay close across the run. Its subcompact class means fewer large flat panels than a bigger car, but the tailgate and roof still need careful handling. A wrap shop can lay out the film efficiently because both generations share the same five-door hatchback style.

Sandero wrap ideas have to work around a tailgate that includes the rear glass, so the film ends at the edge of the glass. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Bright decorative moldings on some trims stay bright next to the film unless a chrome delete covers them. Fog lamps in the front bumper on some trims need cut-outs in the bumper film.

How much vinyl to wrap a Sandero depends on the generation and the film type. The second generation takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. The first generation takes the same 52 ft (16 m) of cast film, because its body is only slightly shorter at 158.3 in (4,020 mm). Chrome or patterned film adds about 10 ft (3 m) on both generations.

Questions about wrapping a Renault Sandero

How much vinyl does it take to wrap a Renault Sandero?

A Renault Sandero takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap for a full wrap of the newest body. Chrome or patterned film raises that to about 62 ft (19 m). The figure covers the five-door hatchback body of the second generation from 2012 onward.

Which years of the Sandero take the same film cuts?

The second generation from 2012 until the 2018 restyling takes the same film cuts, and the restyled version from 2018 onward takes its own cuts. The first generation from 2009 to 2014 has its own cuts as well. The 2018 restyling changed bumpers and lights, so film for pre-2018 cars does not fit post-2018 cars.

Can I wrap only the hood or the roof of a Sandero?

Yes, a Sandero can get only the hood or the roof wrapped. A partial wrap on this car includes the roof, hood, or mirror caps. Chrome delete and paint protection film (PPF) on the front end are other smaller jobs that do not require a full wrap.

Is a Sandero hard to wrap?

A Sandero is not hard to wrap for a shop, but some details add work. The tailgate includes the rear glass, so film must end at the glass edge. Roof rails on some trims come off or need cutting around, and fog lamps in the front bumper on some trims need cut-outs. The compact size at about 160.6 in (4,080 mm) keeps the job manageable.