Wraps by car

Seres 3 EV wrap

The Seres 3 EV wrap uses a vinyl wrap on one body: a five-door SUV from 2022 to now, listed as a first generation in this catalog. The full wrap of this newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 57 ft (17.5 m). The car is 172.6 in (4,385 mm) long, and the wrap covers every painted panel.

1generations15.5 mof film for a full wrap

Seres 3 EV, first generation, factory photo
Seres 3 EV, first generation. Factory color shown.

Seres 3 EV wrap colors and ideas

  • Seres 3 EV black wrap
  • Seres 3 EV white wrap
  • Seres 3 EV gray wrap
  • Seres 3 EV silver wrap
  • Seres 3 EV red wrap
  • Seres 3 EV blue wrap
  • Seres 3 EV green wrap
  • Seres 3 EV yellow wrap
  • Seres 3 EV orange wrap
  • Seres 3 EV purple wrap
  • Seres 3 EV pink wrap
  • Seres 3 EV teal wrap
  • Seres 3 EV brown wrap
  • Seres 3 EV gold wrap
  • Seres 3 EV chrome wrap
  • Seres 3 EV color shift wrap
  • Seres 3 EV carbon fiber wrap
  • Seres 3 EV camo and patterned wrap

How much vinyl to wrap a Seres 3 EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)172.6 in (4,385 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Seres 3 EV wrap cost factors

Seres 3 EV wrap cost depends on the size of the car, the film choice, and the labor for the specific panels. The body is 172.6 in (4,385 mm) long, and the full wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) in chrome or patterned film. The panoramic glass roof, sunroof opening, and roof rails add steps to the roof work, and the wrap cost follows the time those steps take. Parking sensors, cameras, and the charge port door need careful cut-outs, which also affect the cost more than the film area alone.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Seres 3 EV wraps by generation

Swipe sideways. Tap a card for the full description.

Seres 3 EV, first generation, factory photo
Factory color shown

2022–now Seres 3 EV SUV (first generation)

2022–nowSUV (5 doors)172.6 in (4,385 mm)

The first generation Seres 3 EV has a glass roof that is not wrapped, so the roof stays dark whatever the color of the film. The glass panel runs from the windshield to the tailgate and sits inside the roof rails, and the wrap ends at the rails. Since every trim of this generation includes the panoramic glass roof, no roof film covers the glass area. That leaves a dark roof surface and changes the look of a color change wrap compared with a metal roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Seres 3 EV

A partial wrap on a Seres 3 EV covers the hood, mirror caps, and tailgate, leaving the rest of the paint exposed. The chrome delete (bright trim covered with black film) works on the window trim and badges, and it is a small job next to a full wrap. Paint protection film (PPF) is clear film on the front end, and it protects the hood, fenders, bumper, and mirror caps. Every partial wrap uses less film than the full 51 ft (15.5 m) estimate, but the labor still follows the cut-outs around sensors and cameras.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Seres 3 EV: body, cut-outs and film

The Seres 3 EV vinyl wrap covers a five-door SUV that is 172.6 in (4,385 mm) long. The single body style means one set of panels to wrap: two bumpers, four doors, a hood, a tailgate and two front fenders. A length near 4.4 meters puts this car in the usual range for a compact SUV, so film quantity follows the numbers above. The wrap installer works around a tailgate with the rear glass in it, where film ends at the edge of the glass.

Seres 3 EV wrap ideas start with the parts that need cut-outs or come off. Every trim has a panoramic glass roof, and glass is not wrapped, so the film ends at the roof rails. Every trim has a sunroof, so the roof film is cut around its opening. Roof rails come off before the roof is wrapped, or the film is cut along them. The bumpers carry parking sensors on every trim, so the film is cut around each sensor, and cameras in the body need cut-outs around each lens. The charge port door on this electric car is wrapped as a small piece of its own.

How much vinyl to wrap a Seres 3 EV stays the same because the catalog lists one generation, produced from 2022 to now. The body length of 172.6 in (4,385 mm) and the single SUV style do not change between model years. Counting film means starting from the 51 ft (15.5 m) of cast film for a standard wrap, then adding material for patterns or chrome. The panoramic glass roof and sunroof remove area from the roof, so the roof needs less film than a solid metal roof.

Questions about wrapping a Seres 3 EV

How much vinyl does it take to wrap a Seres 3 EV?

A Seres 3 EV takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. If the wrap uses chrome or patterned film, the amount goes up to about 57 ft (17.5 m). The car is 172.6 in (4,385 mm) long and is a five-door SUV, so the film covers all painted panels on the single body style.

Can the roof of a Seres 3 EV be wrapped?

Yes, the roof of a Seres 3 EV can be wrapped, but the panoramic glass roof itself is not wrapped. The film goes on the metal area between the glass and the roof rails, and it ends at the edge of the glass. Every trim has this glass roof and a sunroof, so the roof film is cut around the opening and along the rails.

Can I wrap only the hood or the roof of a Seres 3 EV?

Yes, you can wrap only the hood or the roof of a Seres 3 EV. A partial wrap covers the hood, mirror caps, and tailgate, and the roof can be done as a separate section. The roof wrap ends at the panoramic glass and the roof rails, and the hood wrap needs cut-outs for any sensors or washers on the panel.

Is a Seres 3 EV hard to wrap?

A Seres 3 EV adds work in specific places, but it is not unusually hard to wrap. The panoramic glass roof and sunroof mean the roof film is cut around the glass and the opening, and the roof rails come off or get cut along. Every trim has parking sensors in the bumpers and cameras in the body, each needing a cut-out, and the charge port door is wrapped as a small separate piece. The size of 172.6 in (4,385 mm) keeps the film usage in the range of a compact SUV.