Wraps by car

Seres M5 wrap

The Seres M5 wrap page covers the electric SUV produced from 2024 to the present, offered in one generation. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The page explains how the body styles and size affect film use, what parts need cut-outs, and how the generations differ for film planning.

1generations17 mof film for a full wrap

Seres M5, first generation, factory photo
Seres M5, first generation. Factory color shown.

Seres M5 wrap colors and ideas

  • Seres M5 black wrap
  • Seres M5 white wrap
  • Seres M5 gray wrap
  • Seres M5 silver wrap
  • Seres M5 red wrap
  • Seres M5 blue wrap
  • Seres M5 green wrap
  • Seres M5 yellow wrap
  • Seres M5 orange wrap
  • Seres M5 purple wrap
  • Seres M5 pink wrap
  • Seres M5 teal wrap
  • Seres M5 brown wrap
  • Seres M5 gold wrap
  • Seres M5 chrome wrap
  • Seres M5 color shift wrap
  • Seres M5 carbon fiber wrap
  • Seres M5 camo and patterned wrap

How much vinyl to wrap a Seres M5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)188.4 in (4,785 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Seres M5 wrap cost factors

The Seres M5 wrap cost depends on the amount of film, the body size, and the labor for its specific parts. A full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) film on a body that is 188.4 in (4,785 mm) long. The panoramic glass roof is not wrapped, which reduces film area but adds time for clean edges at the roof rails. Cut-outs for parking sensors, cameras, and the charge port door also affect the labor in the quote.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Seres M5 wraps by generation

Swipe sideways. Tap a card for the full description.

Seres M5, first generation, factory photo
Factory color shown

2024–now Seres M5 SUV (first generation)

2024–nowSUV (5 doors)188.4 in (4,785 mm)

The first generation Seres M5 has a panoramic glass roof on every trim, and the roof is not wrapped. The wrap ends at the roof rails, so the dark glass keeps its look no matter which color of film you pick. An installer masks the roof rails and glass edge to keep the line clean. The roof area is one of the largest surfaces left unwrapped on this body.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Seres M5

A Seres M5 chrome delete covers the window trim and badges with black film instead of a full color change. A partial wrap on this SUV typically includes the hood, mirror caps, and tailgate. Paint protection film (PPF) is applied as a clear film on the front end to guard against stone chips. Those smaller jobs use less film than a full wrap and can be done without touching the glass roof.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Seres M5: body, cut-outs and film

The Seres M5 vinyl wrap work starts with a five-door SUV body that is 188.4 in (4,785 mm) long. That length means a full wrap needs about 56 ft (17 m) of 60-inch (1.52 m) film, with extra if you choose chrome or patterned film. The tall roof and upright tailgate add surface area compared to a sedan. Planning the Seres M5 vinyl wrap uses the factory body dimensions as the base for cutting film panels.

Seres M5 wrap ideas must work around a tailgate with the rear glass in it, so the film ends at the edge of the glass. Every trim has a panoramic glass roof, and the film stops at the roof rails because glass is not wrapped. Parking sensors sit in the bumpers and cameras sit in the body, so the installer cuts the film around each sensor and lens. The charge port door is wrapped as a small piece of its own on this electric car.

How much vinyl to wrap a Seres M5 depends on the generation, and the catalog lists only one generation from 2024 to now. Anyone counting film for a Seres M5 uses the same figure for all years: about 56 ft (17 m) of 60-inch (1.52 m) cast film. The body length stays at 188.4 in (4,785 mm) in the data for this generation. There is no older or newer body in the catalog, so film plans do not change between years.

Questions about wrapping a Seres M5

How much vinyl does it take to wrap a Seres M5?

A Seres M5 takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. This figure comes from the film estimate for the newest body in the catalog. If you choose chrome or patterned film, plan for about 62 ft (19 m). The estimate covers the five-door SUV body and includes waste from cutting around the glass and sensors.

Can the roof of a Seres M5 be wrapped?

No, the roof of a Seres M5 cannot be wrapped because every trim has a panoramic glass roof. Glass is not wrapped, and the film ends at the roof rails. The dark glass stays as it is, so the roof look does not change with the wrap color. Only the metal panels around the roof can be covered.

Can I wrap only the hood or the roof of a Seres M5?

Yes, you can wrap only the hood or the roof of a Seres M5 as a partial wrap. The hood is a common single panel, and the roof can be done with vinyl even though it is glass, but it is usually left unwrapped. Partial jobs also include the mirror caps and tailgate. A partial wrap uses less film than a full wrap and can change the look without wrapping the whole SUV.

Is a Seres M5 hard to wrap?

A Seres M5 is moderately hard to wrap because of its size and the many cut-outs. The body is 188.4 in (4,785 mm) long, so the installer handles large panels on the doors and rear quarters. Every trim has parking sensors in the bumpers and cameras in the body, so the film must be cut around each one. The tailgate with rear glass and the panoramic roof add more edges to trim carefully, and the charge port door is a small separate piece.