Wraps by car

Simca 1300/1500 wrap

A Simca 1300/1500 wrap uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the sedan. This page covers the two generations of the Simca 1300/1500 produced from 1963 to 1976. The wagon body needs slightly more vinyl wrap than the sedan.

2generations14.5 mof film for a full wrap

Simca 1300/1500, second generation, factory photo
Simca 1300/1500, second generation. Factory color shown.

Simca 1300/1500 wrap colors and ideas

  • 1300/1500 black wrap
  • 1300/1500 white wrap
  • 1300/1500 gray wrap
  • 1300/1500 silver wrap
  • 1300/1500 red wrap
  • 1300/1500 blue wrap
  • 1300/1500 green wrap
  • 1300/1500 yellow wrap
  • 1300/1500 orange wrap
  • 1300/1500 purple wrap
  • 1300/1500 pink wrap
  • 1300/1500 teal wrap
  • 1300/1500 brown wrap
  • 1300/1500 gold wrap
  • 1300/1500 chrome wrap
  • 1300/1500 color shift wrap
  • 1300/1500 carbon fiber wrap
  • 1300/1500 camo and patterned wrap

How much vinyl to wrap a Simca 1300/1500

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1966–1976sedan, wagon (4 or 5 doors)169.5 in (4,305 mm) to 175.5 in (4,458 mm)about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1963–1966sedan, wagon (4 or 5 doors)167.0 in (4,242 mm)about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

1300/1500 wrap cost factors

The 1300/1500 wrap cost depends on the film area, the body style and the panel work. The sedan and wagon use 48 ft (14.5 m) to 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A second-generation body is up to 175.5 in (4,458 mm) long, so it needs more material than a first-generation car. Extra cut-outs around the tailgate glass on the wagon add labor.

  • Film for a full wrap: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

1300/1500 wraps by generation

Swipe sideways. Tap a card for the full description.

Simca 1300/1500, second generation, factory photo
Factory color shown

1966–1976 1300/1500 sedan, wagon (second generation)

1966–1976sedan, wagon (4 or 5 doors)169.5 in (4,305 mm) to 175.5 in (4,458 mm)

The second-generation Simca 1300/1500 was built from 1966 to 1976 as a sedan or wagon. The body style decides the panel plan and the film amount for a full wrap. The wagon has a tailgate with rear glass, and the film ends at the edge of the glass. Lengths run 169.5 in (4,305 mm) to 175.5 in (4,458 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Simca 1300/1500, first generation, factory photo
Factory color shown

1963–1966 1300/1500 sedan, wagon (first generation)

1963–1966sedan, wagon (4 or 5 doors)167.0 in (4,242 mm)

The first-generation Simca 1300/1500 from 1963 to 1966 also came as a sedan or wagon. Paint age matters on a car of these years: panels may be original or repainted. A test spot comes before a full wrap to check how the film adheres. The body is 167.0 in (4,242 mm) long, so it needs about 48 ft (14.5 m) of film for the sedan.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a 1300/1500

A partial wrap on a Simca 1300/1500 can cover the roof, hood or mirror caps. Chrome delete uses black film on window trim and badges for a cleaner look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less vinyl than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Simca 1300/1500: body, cut-outs and film

The Simca 1300/1500 vinyl wrap covers a mid-size body with sedan and wagon styles. Sedan lengths run 169.5 in (4,305 mm) to 175.5 in (4,458 mm) on the second generation. The wagon's tailgate with rear glass means the film stops at the edge of the glass. Plan for about 48 ft (14.5 m) of film for a sedan and up to 51 ft (15.5 m) for a wagon.

1300/1500 wrap ideas start with color change on the large flat panels. The tailgate on wagon versions has rear glass set into it, so the wrap ends cleanly at the glass edge. Remove badges and window trim for a smooth finish on doors and fenders. Chrome delete with black film covers the bright trim without changing the body color.

How much vinyl to wrap a 1300/1500 depends on the generation and body style. A first-generation sedan takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The second-generation wagon is the longest at 175.5 in (4,458 mm) and needs about 49 ft (15 m) of film. Add extra film for chrome or patterned areas, up to 66 ft (20 m) on some bodies.

More Simca wraps

Questions about wrapping a Simca 1300/1500

How much vinyl does it take to wrap a Simca 1300/1500?

A Simca 1300/1500 wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for the newest wagon body. The sedan of the same generation uses about 48 ft (14.5 m). Chrome or patterned film can raise the amount to about 66 ft (20 m).

Which 1300/1500 body takes more film?

The wagon body takes more film than the sedan on a 1300/1500. A second-generation wagon needs about 49 ft (15 m), while the sedan needs about 48 ft (14.5 m). The extra area comes from the longer rear section and tailgate.

Can I wrap only the hood or the roof of a 1300/1500?

Yes, you can wrap only the hood or the roof of a 1300/1500. A partial wrap of the roof, hood or mirror caps is a standard job. You can also choose chrome delete on window trim and badges or clear paint protection film on the front end.

Is a 1300/1500 hard to wrap?

No, a 1300/1500 is not hard to wrap, but the wagon tailgate adds work. The rear glass is set into the tailgate, so the film must end at the edge of the glass. The body is mid-size, with lengths up to 175.5 in (4,458 mm), which means large panels. Removing badges and window trim before wrapping gives a cleaner result.