Wraps by car

Simca 1307 wrap

The Simca 1307 wrap page covers the first generation of this mid-size hatchback, produced from 1975 to 1979. A full vinyl wrap of the five-door body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate rises to about 61 ft (18.5 m).

1generations15 mof film for a full wrap

Simca 1307, first generation, factory photo
Simca 1307, first generation. Factory color shown.

Simca 1307 wrap colors and ideas

  • Simca 1307 black wrap
  • Simca 1307 white wrap
  • Simca 1307 gray wrap
  • Simca 1307 silver wrap
  • Simca 1307 red wrap
  • Simca 1307 blue wrap
  • Simca 1307 green wrap
  • Simca 1307 yellow wrap
  • Simca 1307 orange wrap
  • Simca 1307 purple wrap
  • Simca 1307 pink wrap
  • Simca 1307 teal wrap
  • Simca 1307 brown wrap
  • Simca 1307 gold wrap
  • Simca 1307 chrome wrap
  • Simca 1307 color shift wrap
  • Simca 1307 carbon fiber wrap
  • Simca 1307 camo and patterned wrap

How much vinyl to wrap a Simca 1307

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1979hatchback (5 doors)167.3 in (4,250 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Simca 1307 wrap cost factors

Simca 1307 wrap cost depends on the film amount, the body condition and the labor for its size. The five-door hatchback takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. If the panels are original or repainted, a test spot before the full wrap can change the work steps.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Simca 1307 wraps by generation

Swipe sideways. Tap a card for the full description.

Simca 1307, first generation, factory photo
Factory color shown

1975–1979 Simca 1307 hatchback (first generation)

1975–1979hatchback (5 doors)167.3 in (4,250 mm)

The first generation Simca 1307 from 1975 to 1979 has one five-door hatchback body style. Paint age matters on a car of these years because panels may be original or repainted. A test spot before a full wrap shows whether the film will stick well to the old paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Simca 1307

Smaller jobs on a Simca 1307 include a partial wrap of the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end protects the nose from stone damage.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Simca 1307: body, cut-outs and film

The Simca 1307 vinyl wrap uses one five-door hatchback body style for all years of the first generation. The car is 167.3 in (4,250 mm) long, so a full color change wrap needs the film estimate given on this page. A tailgate with the rear glass in it means the film ends at the edge of the glass.

Simca 1307 wrap ideas start with the tailgate and its rear glass, because the film stops at the edge of the glass. For a clean install, the rear glass area works as a natural cut line. Other parts that come off for a wrap include door handles, mirrors and trim pieces.

To know how much vinyl to wrap a Simca 1307, count one generation from 1975 to 1979 with a single body style. The five-door hatchback size stays the same, so the film estimate of about 49 ft (15 m) covers any car from these years. Only a chrome or patterned film changes the amount to about 61 ft (18.5 m).

More Simca wraps

Questions about wrapping a Simca 1307

How much vinyl does it take to wrap a Simca 1307?

A full wrap of a Simca 1307 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the amount is about 61 ft (18.5 m). These figures come from the first-generation five-door hatchback body.

Can I wrap only the hood or the roof of a Simca 1307?

Yes, you can wrap only the hood or the roof of a Simca 1307 as a partial wrap. Mirror caps are another small job. A chrome delete on the window trim and badges is also a separate option.

Is a Simca 1307 hard to wrap?

The Simca 1307 is not hard to wrap, but the tailgate glass adds one step. Because the film ends at the edge of the glass, the installer needs a precise cut line there. The 167.3 in (4,250 mm) length is normal for a mid-size car.

How many generations of the Simca 1307 does this page cover?

This page covers one generation of the Simca 1307, the first generation from 1975 to 1979. All cars from these years share the same five-door hatchback body.