A Pleo wrapped in teal starts with choosing the finish, because matte, satin, and gloss change how the color reads on the car. Matte film looks like flat paint and hides small surface waves, while satin gives a low sheen between matte and gloss. Gloss teal acts like a deep clear-coated paint and makes the car look wet. The color change wrap is removable, so the original paint is still under the film if you remove it later.

The factory paint on the Pleo needs good preparation before the teal film goes on, since chips and peeling clear coat will show through. The tailgate on both generations has the rear glass in it, so the film ends at the edge of the glass and leaves no film on the window. Seams are placed on body lines or panel edges where possible, but the Pleo's short panels may need a seam on a flat area. A test spot on the paint is wise before a full wrap, especially on older cars with unknown paint history.

Teal wrap film on a Pleo is removable, so you can take it off later and the paint underneath should be unchanged if the paint was healthy. Hand wash the wrapped car with a soft sponge and a mild soap, and avoid automatic car washes with brushes. High-pressure water can lift film edges if aimed directly at them, so keep the nozzle at a distance. The film does not need wax or polish, just regular washing to keep the teal color clean.