Wraps by car

Subaru Pleo wrap

The Subaru Pleo wrap page covers both generations of the car, from 1998 to 2018. A full wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast vinyl wrap. The Pleo is a mini hatchback with three or five doors, so it is one of the smaller cars to wrap.

2generations13.5 mof film for a full wrap

Subaru Pleo, second generation, factory photo
Subaru Pleo, second generation. Factory color shown.

Subaru Pleo wrap colors and ideas

  • Pleo black wrap
  • Pleo white wrap
  • Pleo gray wrap
  • Pleo silver wrap
  • Pleo red wrap
  • Pleo blue wrap
  • Pleo green wrap
  • Pleo yellow wrap
  • Pleo orange wrap
  • Pleo purple wrap
  • Pleo pink wrap
  • Pleo teal wrap
  • Pleo brown wrap
  • Pleo gold wrap
  • Pleo chrome wrap
  • Pleo color shift wrap
  • Pleo carbon fiber wrap
  • Pleo camo and patterned wrap

How much vinyl to wrap a Subaru Pleo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2018hatchback (3 or 5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1998–2010hatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Pleo wrap cost factors

The Pleo wrap cost depends on the size of the car, the condition of the paint, and the film you pick. A full wrap needs about 44 ft (13.5 m) of vinyl, so the material amount is the same for every Pleo. Paint chips or peeling clear coat add preparation time before the film can be applied. The final price changes with the installer's labor rate and any repairs to the surface.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Pleo wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Pleo, second generation, factory photo
Factory color shown

2010–2018 Pleo hatchback (second generation)

2010–2018hatchback (3 or 5 doors)133.7 in (3,395 mm)

The second generation Pleo from 2010 to 2018 is a car where paint age can add a step before the wrap. Some panels may have been repainted, and a test spot tells the installer whether the film will lift old paint. The wrap film on a repainted panel can pull the paint off when the film is removed later.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Subaru Pleo, first generation, factory photo
Factory color shown

1998–2010 Pleo hatchback (first generation)

1998–2010hatchback (5 doors)133.7 in (3,395 mm)

The first generation Pleo from 1998 to 2010 was restyled in 2002 and 2005, and the bumpers and lights changed shape each time. Film cut for one version does not fit the other, so the installer has to measure the actual car. An owner with a 2000 model and a 2005 model cannot share the same template for the front bumper.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Pleo

A partial wrap on a Pleo covers the roof, hood, or mirror caps as separate jobs. Pleo chrome delete covers the window trim and badges with black film to remove the bright work. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Pleo: body, cut-outs and film

The Subaru Pleo vinyl wrap is sized around a compact hatchback body 133.7 in (3,395 mm) long. The shape has simple flat panels and a short roof, so film waste stays low on this mini car. Both three-door and five-door styles are wrapped the same way from the beltline down, with the doors taking most of the material.

Pleo wrap ideas have to respect the tailgate with the rear glass in it, because the film ends at the edge of the glass. The side mirrors and door handles come off for a clean wrap, and the badges are removed before the film goes on. The roof rails are not present, so the roof is one unbroken panel.

When you count how much vinyl to wrap a Pleo, the two generations take the same amount because the body length is unchanged. The first generation ran from 1998 to 2010, and the second generation from 2010 to 2018. Trim changes between years do not change the outer skin of the car.

Questions about wrapping a Subaru Pleo

How much vinyl does it take to wrap a Subaru Pleo?

A full wrap of a Subaru Pleo takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast vinyl. That number comes from the film estimate for the newest body, a mini hatchback 133.7 in (3,395 mm) long. A patterned or chrome film needs more material, about 52 ft (16 m), to match the pattern.

Can I wrap only the hood or the roof of a Pleo?

Yes, you can wrap only the hood or the roof of a Pleo as a partial job. The installer can also wrap just the mirror caps, the window trim and badges for a chrome delete, or add clear paint protection film to the front end. Any of these smaller jobs uses less film than a full wrap.

Is a Pleo hard to wrap?

A Pleo is not the hardest car to wrap, but the tailgate with the rear glass in it adds careful trimming work. The film has to end exactly at the edge of the glass, so the installer cuts a clean line around the window. The small size of the car means fewer panels, but the rear hatch takes patience.

How many generations of the Pleo does this page cover?

This page covers two generations of the Pleo. The first generation ran from 1998 to 2010, and the second generation ran from 2010 to 2018. Both are mini hatchbacks with the same overall length of 133.7 in (3,395 mm).