Wraps by car

Subaru Dias Wagon wrap

The Subaru Dias Wagon wrap page covers the first and second generation of this kei van. A full vinyl wrap of a Dias Wagon takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The catalog shows two generations built from 2009 to 2020. Both bodies are five-door vans with sliding side doors.

2generations15.5 mof film for a full wrap

Subaru Dias Wagon, second generation, factory photo
Subaru Dias Wagon, second generation. Factory color shown.

Subaru Dias Wagon wrap colors and ideas

  • Dias Wagon black wrap
  • Dias Wagon white wrap
  • Dias Wagon gray wrap
  • Dias Wagon silver wrap
  • Dias Wagon red wrap
  • Dias Wagon blue wrap
  • Dias Wagon green wrap
  • Dias Wagon yellow wrap
  • Dias Wagon orange wrap
  • Dias Wagon purple wrap
  • Dias Wagon pink wrap
  • Dias Wagon teal wrap
  • Dias Wagon brown wrap
  • Dias Wagon gold wrap
  • Dias Wagon chrome wrap
  • Dias Wagon color shift wrap
  • Dias Wagon carbon fiber wrap
  • Dias Wagon camo and patterned wrap

How much vinyl to wrap a Subaru Dias Wagon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–2020van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2009–2017van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Dias Wagon wrap cost factors

A Dias Wagon wrap cost depends on the size of the job, the film chosen, and the work on the sliding doors. The van needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap, so a cast color film is the main material cost. The tall body and the door track cut-outs add labor compared with a low car. A chrome delete or a clear front-end film on this van has its own material and fitting time.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (73.8 in (1,875 mm)): the roof is wrapped from a platform.

Dias Wagon wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Dias Wagon, second generation, factory photo
Factory color shown

2017–2020 Dias Wagon van (second generation)

2017–2020van (5 doors)133.7 in (3,395 mm)

The second generation Subaru Dias Wagon was built from 2017 to 2020 as a five-door van. It is 133.7 in (3,395 mm) long and 73.8 in (1,875 mm) tall, so the roof is wrapped from a platform. The sliding side doors have tracks that stay bare, and the film is cut along them. This body uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.8 in (1,875 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Subaru Dias Wagon, first generation, factory photo
Factory color shown

2009–2017 Dias Wagon van (first generation)

2009–2017van (5 doors)133.7 in (3,395 mm)

The first generation Subaru Dias Wagon ran from 2009 to 2017 as a five-door van 133.7 in (3,395 mm) long and 74.8 in (1,900 mm) tall. Paint on a car of these years may be original or repainted, so a test spot comes before a full wrap. The sliding side doors keep their tracks bare, and the film is cut along them. A full wrap of this generation takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (74.8 in (1,900 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Dias Wagon

A partial wrap on a Subaru Dias Wagon can cover the roof, the hood, or the mirror caps. A Dias Wagon chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end of the van. These smaller jobs let you change or protect only part of the body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Dias Wagon: body, cut-outs and film

A Subaru Dias Wagon vinyl wrap fits a compact van body 133.7 in (3,395 mm) long and about 74 in (1,880 mm) tall. The tall roofline means the roof must be wrapped from a platform. The sliding side doors add a long flat area that is simple to cover. The small nose and flat sides keep the film use low for the size of the vehicle.

Dias Wagon wrap ideas begin with the sliding side door tracks, which stay bare and decide where the film is cut. The door handles, mirrors and badges are removed for a clean install. The roof rails, if fitted, are usually taken off before the roof film goes on. The rear wiper and the antenna base need cut-outs or removal.

If you are counting how much vinyl to wrap a Dias Wagon, both generations use the same 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full color change. The first generation is 74.8 in (1,900 mm) tall, and the second is 73.8 in (1,875 mm), a difference that does not change the film estimate. Chrome or patterned film needs about 57 ft (17.5 m) because of pattern matching and waste. A partial job on the roof or hood uses a fraction of that film.

Questions about wrapping a Subaru Dias Wagon

How much vinyl does it take to wrap a Subaru Dias Wagon?

Yes, a full wrap of a Subaru Dias Wagon takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. This figure covers the newest body from 2017 to 2020. Chrome or patterned film needs about 57 ft (17.5 m) because of matching and waste.

Are the sliding doors of a Dias Wagon wrapped?

The sliding doors of a Subaru Dias Wagon are wrapped but the tracks stay bare. The film is cut along the tracks so the doors can still slide. This is a standard part of the install on both generations.

Can I wrap only the hood or the roof of a Dias Wagon?

Yes, a Subaru Dias Wagon can get a partial wrap on the roof, the hood or the mirror caps. A chrome delete on the window trim and badges is another small job. Clear paint protection film (PPF) on the front end is also an option.

Is a Dias Wagon hard to wrap?

A Subaru Dias Wagon is not the easiest van to wrap because of its tall body and sliding doors. The roof is about 74 in (1,880 mm) high, so it must be wrapped from a platform. The door tracks stay bare, and the film must be cut along them carefully.