Wraps by car

Subaru Impreza WRX STi wrap

The Subaru Impreza WRX STi wrap page covers the first, second, and third generations of the car. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

3generations17 mof film for a full wrap

Subaru Impreza WRX STi, third generation, factory photo
Subaru Impreza WRX STi, third generation. Factory color shown.

Subaru Impreza WRX STi wrap colors and ideas

  • Impreza WRX STi black wrap
  • Impreza WRX STi white wrap
  • Impreza WRX STi gray wrap
  • Impreza WRX STi silver wrap
  • Impreza WRX STi red wrap
  • Impreza WRX STi blue wrap
  • Impreza WRX STi green wrap
  • Impreza WRX STi yellow wrap
  • Impreza WRX STi orange wrap
  • Impreza WRX STi purple wrap
  • Impreza WRX STi pink wrap
  • Impreza WRX STi teal wrap
  • Impreza WRX STi brown wrap
  • Impreza WRX STi gold wrap
  • Impreza WRX STi chrome wrap
  • Impreza WRX STi color shift wrap
  • Impreza WRX STi carbon fiber wrap
  • Impreza WRX STi camo and patterned wrap

How much vinyl to wrap a Subaru Impreza WRX STi

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2014hatchback, sedan (4 or 5 doors)173.8 in (4,415 mm) to 180.3 in (4,580 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2000–2007sedan (4 doors)173.8 in (4,415 mm) to 175.8 in (4,465 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1994–2000coupe, sedan, wagon (2 or 4 or 5 doors)170.9 in (4,340 mm) to 171.3 in (4,350 mm)about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Impreza WRX STi wrap cost factors

The Impreza WRX STi wrap cost depends on the film amount, the body style, and the extra labor from cut-outs and trim. A first-generation wagon needs more film than a coupe, and the third generation has cameras and fog lamps that require precise cutting. The size of the car also matters, with lengths from 170.9 in (4,340 mm) to 180.3 in (4,580 mm) across generations. Larger panels and more complex bumpers increase the time and film needed.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Impreza WRX STi wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Impreza WRX STi, third generation, factory photo
Factory color shown

2007–2014 Impreza WRX STi hatchback, sedan (third generation)

2007–2014hatchback, sedan (4 or 5 doors)173.8 in (4,415 mm) to 180.3 in (4,580 mm)

The third-generation Subaru Impreza WRX STi came as a hatchback or sedan, and the style decides the panel plan and the film amount. A hatchback has a large tailgate with rear glass, while a sedan has a separate trunk lid. The sedan is slightly longer at up to 180.3 in (4,580 mm), and a full wrap takes about 56 ft (17 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Subaru Impreza WRX STi, second generation, factory photo
Factory color shown

2000–2007 Impreza WRX STi sedan (second generation)

2000–2007sedan (4 doors)173.8 in (4,415 mm) to 175.8 in (4,465 mm)

The second-generation Subaru Impreza WRX STi was restyled in 2002 and again in 2005, so bumpers and lights changed each time. Film cut for one version does not fit the other, because the contours and cut-outs differ. The sedan body stays compact, from 173.8 in (4,415 mm) to 175.8 in (4,465 mm) long, and takes about 49 ft (15 m) of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Subaru Impreza WRX STi, first generation, factory photo
Factory color shown

1994–2000 Impreza WRX STi coupe, sedan, wagon (first generation)

1994–2000coupe, sedan, wagon (2 or 4 or 5 doors)170.9 in (4,340 mm) to 171.3 in (4,350 mm)

The first-generation Subaru Impreza WRX STi is from 1994 to 2000, and paint age matters on a car of these years. Panels may be original or repainted, and a test spot comes before a full wrap to check adhesion. The coupe and sedan are about 170.9 in (4,340 mm) long, while the wagon is slightly longer at 171.3 in (4,350 mm). Film needs range from about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Impreza WRX STi

An Impreza WRX STi chrome delete covers window trim and badges with black film, and a partial wrap can do the roof, hood, or mirror caps. Paint protection film (PPF) is another option, with clear film on the front end to shield against stone chips. Partial jobs use less film and focus on high-wear or high-visibility areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Impreza WRX STi: body, cut-outs and film

The Subaru Impreza WRX STi vinyl wrap follows the compact body of this sports sedan. Third-generation cars came as a hatchback or sedan, while a full wrap of the newest body takes about 56 ft (17 m) of film. First-generation cars were shorter, from 170.9 in (4,340 mm) to 171.3 in (4,350 mm) long, and needed up to 52 ft (16 m) for the wagon. The choice of body style decides the panel plan and the film amount.

Impreza WRX STi wrap ideas must work around the hatchback tailgate with the rear glass in it, so the film ends at the edge of the glass. Third-generation cars have cameras in the body, and the film is cut around each lens. Fog lamps in the front bumper of the third generation also need cut-outs in the bumper film. These details keep the wrap clean and functional.

Knowing how much vinyl to wrap an Impreza WRX STi helps when ordering film for one of the three generations. The second-generation sedan uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, and the third generation takes about 56 ft (17 m). The first-generation coupe needs about 46 ft (14 m), while the wagon needs up to 52 ft (16 m). If you choose chrome or patterned film, plan for about 66 ft (20 m) on the third generation and up to about 67 ft (20.5 m) on the first generation.

Questions about wrapping a Subaru Impreza WRX STi

How much vinyl does it take to wrap a Subaru Impreza WRX STi?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Subaru Impreza WRX STi. That figure is for a full wrap of the third-generation hatchback or sedan. Chrome or patterned film requires more, about 66 ft (20 m), because the pattern must be matched.

Which Impreza WRX STi body takes more film?

The first-generation Subaru Impreza WRX STi wagon takes more film than the coupe or sedan. A full wrap of the wagon needs up to 52 ft (16 m) of 60-inch (1.52 m) cast film, while the coupe needs about 46 ft (14 m). The third-generation hatchback and sedan use about the same amount, around 56 ft (17 m).

Can I wrap only the hood or the roof of an Impreza WRX STi?

Yes, you can wrap only the hood or the roof of an Impreza WRX STi. A partial wrap covers the roof, hood, or mirror caps, and a chrome delete does the window trim and badges. Paint protection film (PPF) is a clear option for the front end.

Is an Impreza WRX STi hard to wrap?

Yes, an Impreza WRX STi is somewhat hard to wrap because of its compact size and detailed parts. The third-generation hatchback tailgate has rear glass, so the film ends at the edge of the glass. Cameras in the body and fog lamps in the bumper require cut-outs, adding time and care to the installation.