Wraps by car

Subaru Solterra wrap

A Subaru Solterra wrap covers the whole body of this electric SUV, from the first generation produced since 2021. The catalog holds one generation, and a full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 70 ft (21.5 m).

1generations19 mof film for a full wrap

Subaru Solterra, first generation, factory photo
Subaru Solterra, first generation. Factory color shown.

Subaru Solterra wrap colors and ideas

  • Solterra black wrap
  • Solterra white wrap
  • Solterra gray wrap
  • Solterra silver wrap
  • Solterra red wrap
  • Solterra blue wrap
  • Solterra green wrap
  • Solterra yellow wrap
  • Solterra orange wrap
  • Solterra purple wrap
  • Solterra pink wrap
  • Solterra teal wrap
  • Solterra brown wrap
  • Solterra gold wrap
  • Solterra chrome wrap
  • Solterra color shift wrap
  • Solterra carbon fiber wrap
  • Solterra camo and patterned wrap

How much vinyl to wrap a Subaru Solterra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)184.6 in (4,690 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Solterra wrap cost factors

Solterra wrap cost depends on the film area, the film type, and the labor for this electric SUV. A full wrap needs about 62 ft (19 m) of cast film, or about 70 ft (21.5 m) for chrome or patterned film. The tailgate glass edge and the separate charge port door add installation steps that influence the final cost.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2025: bumpers and lights differ between the versions, and so do the film cuts.

Solterra wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Solterra, first generation, factory photo
Factory color shown

2021–now Solterra SUV (first generation)

2021–nowSUV (5 doors)184.6 in (4,690 mm)

The first generation Subaru Solterra spans 2021 to now, and the 2025 restyling changed the bumpers and lights. Film cut for one version does not fit the other because those parts have different shapes. For a wrap of either version, choose templates that match the production years of the car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Solterra

A partial wrap on a Subaru Solterra can cover the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end protects the nose from stone chips. These jobs use less material than a full wrap and can be planned in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Solterra: body, cut-outs and film

The Subaru Solterra vinyl wrap suits a single body style: a five-door SUV with a length of 184.6 in (4,690 mm). The large panels and flat sides are straightforward for film, but the tailgate and the charge port door need separate pieces. This size means a full wrap uses more film than a small hatchback, so material planning matters.

Solterra wrap ideas start with the parts that need cut-outs or come off during installation. The tailgate has the rear glass within it, so the film ends at the edge of the glass. Being an electric car, the charge port door is wrapped as a small piece of its own, not as part of the rear quarter panel.

To know how much vinyl to wrap a Solterra, compare the years before and after the 2025 restyling. The body shape stays the same overall, but bumpers and lights changed, so film cut for one version does not fit the other. When you count film for a pre-2025 car, order the same total length, but use templates for that version.

Questions about wrapping a Subaru Solterra

How much vinyl does it take to wrap a Subaru Solterra?

About 62 ft (19 m) of 60-inch (1.52 m) cast film is needed for a full Subaru Solterra wrap. If you choose chrome or patterned film, the estimate rises to about 70 ft (21.5 m). These figures cover the whole body of the newest version, including the separate charge port door piece.

Which years of the Solterra take the same film cuts?

The Solterra has one generation, so the years 2021 to now share the same main body shape, but the 2025 restyling changed bumpers and lights. Film cut for a 2021–2024 Solterra does not fit a 2025 or later car on those parts. Use templates that match the version you wrap, because the rest of the body panels are the same.

Can I wrap only the hood or the roof of a Solterra?

Yes, a partial wrap of the hood or the roof is possible on a Subaru Solterra. Along with the hood and roof, mirror caps can be wrapped, and a chrome delete covers the window trim and badges. A clear paint protection film (PPF) on the front end is another option smaller than a full wrap.

Is a Solterra hard to wrap?

A Solterra is not unusually hard to wrap, but two details add work. The tailgate has the rear glass in it, so the film ends at the edge of the glass instead of wrapping around. The charge port door is wrapped as a small piece of its own, which requires an extra step on an electric car.