Wraps by car

Subaru Evoltis wrap

The Subaru Evoltis wrap covers the full body of this large SUV using about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl wrap. The Evoltis has been produced since 2017 in a single generation. A color change wrap on the newest body typically requires this amount of film. The extra material is needed for the tall panels and the tailgate.

1generations17.5 mof film for a full wrap

Subaru Evoltis, first generation, factory photo
Subaru Evoltis, first generation. Factory color shown.

Subaru Evoltis wrap colors and ideas

  • Evoltis black wrap
  • Evoltis white wrap
  • Evoltis gray wrap
  • Evoltis silver wrap
  • Evoltis red wrap
  • Evoltis blue wrap
  • Evoltis green wrap
  • Evoltis yellow wrap
  • Evoltis orange wrap
  • Evoltis purple wrap
  • Evoltis pink wrap
  • Evoltis teal wrap
  • Evoltis brown wrap
  • Evoltis gold wrap
  • Evoltis chrome wrap
  • Evoltis color shift wrap
  • Evoltis carbon fiber wrap
  • Evoltis camo and patterned wrap

How much vinyl to wrap a Subaru Evoltis

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowSUV (5 doors)196.8 in (4,998 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Evoltis wrap cost factors

The Evoltis wrap cost depends on the film type and the amount of labor for this 196.8 in (4,998 mm) SUV. A chrome or patterned film needs about 70 ft (21.5 m), which adds material cost. The tall body at 71.6 in (1,819 mm) and the glass roof increase the time for careful cutting. Removing roof rails or wrapping a rear spoiler on some trims adds labor.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have a rear spoiler: it is wrapped as a piece of its own.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (71.6 in (1,819 mm)): the roof is wrapped from a platform.
  • Restyled in 2022: bumpers and lights differ between the versions, and so do the film cuts.

Evoltis wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Evoltis, first generation, factory photo
Factory color shown

2017–now Evoltis SUV (first generation)

2017–nowSUV (5 doors)196.8 in (4,998 mm)

The first generation Subaru Evoltis has a panoramic glass roof on every trim. The glass is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails, leaving the glass exposed. This means a roof wrap on an Evoltis covers only the metal edges around the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a rear spoiler: it is wrapped as a piece of its own.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (71.6 in (1,819 mm)): the roof is wrapped from a platform.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Evoltis

An Evoltis chrome delete covers the window trim and badges with black film, replacing the bright finish. A partial wrap can cover the hood, mirror caps, tailgate, and rear spoiler separately. Paint protection film (PPF) as a clear film on the front end is another option. These smaller jobs allow you to change or protect parts of the SUV without a full wrap.

  • Partial wrap: hood, mirror caps, tailgate, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Evoltis: body, cut-outs and film

A Subaru Evoltis vinyl wrap must handle a 196.8 in (4,998 mm) long SUV body with a tall 71.6 in (1,819 mm) roofline. The five-door body has large doors and a long roof, so installers work from a platform. The film estimate assumes a single color with no printed pattern. A wrap on this SUV takes more film than on a smaller crossover.

Evoltis wrap ideas include covering the tailgate in one piece, with the film ending at the edge of the rear glass. Every trim has a panoramic glass roof, so the roof film stops at the roof rails and the glass is left unwrapped. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Parking sensors in the bumpers on some trims require careful cut-outs around each sensor.

To know how much vinyl to wrap an Evoltis, you count one generation from 2017 onward. The body was restyled in 2022, but the main panels stayed the same size. A full wrap on any Evoltis still needs the same amount of film. The film estimate does not change between early and later production years.

Questions about wrapping a Subaru Evoltis

How much vinyl does it take to wrap a Subaru Evoltis?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap on a Subaru Evoltis. This estimate covers the newest body from 2017 onward. The figure accounts for the large panels and tailgate. Patterned or chrome film needs about 70 ft (21.5 m).

Can the roof of an Evoltis be wrapped?

Yes, the roof of an Evoltis can be wrapped, but the glass roof panel is left unwrapped. The film covers the metal areas around the glass and stops at the roof rails. Since every trim has a panoramic glass roof, the wrapped area is limited to the edges. This keeps the roof looking dark from the glass while adding color to the surrounding metal.

Which years of the Evoltis take the same film cuts?

All years of the Evoltis from 2017 onward use the same film cuts for the main panels. The body was restyled in 2022, but the overall shape and dimensions did not change. Therefore, a pattern made for any production year fits the others. Installers do not need different templates for early and late Evoltis models.

Can I wrap only the hood or the roof of an Evoltis?

Yes, you can wrap only the hood or the roof of an Evoltis. A partial wrap can include the hood, mirror caps, tailgate, and rear spoiler. The roof can be wrapped on its own, though the glass area is not covered. These smaller jobs are an option when a full wrap is not needed.