Wraps by car

Subaru Justy wrap

The Subaru Justy wrap page covers the five generations of the Justy and lists the film a full wrap of the newest body takes. The fifth generation from 2016 to 2020 needs about 56 ft (17 m) of 60-inch (1.52 m) cast film for a standard vinyl wrap. Chrome or patterned film on the same body uses about 66 ft (20 m).

5generations17 mof film for a full wrap

Subaru Justy, fifth generation, factory photo
Subaru Justy, fifth generation. Factory color shown.

Subaru Justy wrap colors and ideas

  • Justy black wrap
  • Justy white wrap
  • Justy gray wrap
  • Justy silver wrap
  • Justy red wrap
  • Justy blue wrap
  • Justy green wrap
  • Justy yellow wrap
  • Justy orange wrap
  • Justy purple wrap
  • Justy pink wrap
  • Justy teal wrap
  • Justy brown wrap
  • Justy gold wrap
  • Justy chrome wrap
  • Justy color shift wrap
  • Justy carbon fiber wrap
  • Justy camo and patterned wrap

How much vinyl to wrap a Subaru Justy

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2020van (5 doors)145.7 in (3,700 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2007–2011hatchback (5 doors)142.1 in (3,610 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2003–2007hatchback (5 doors)148.4 in (3,770 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1995–2003hatchback (3 or 5 doors)147.4 in (3,745 mm) to 151.4 in (3,845 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1984–1995hatchback (3 or 5 doors)145.5 in (3,695 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Justy wrap cost factors

Justy wrap cost depends on the amount of film, the body style, and the work needed for doors and trim on this car. A fifth generation full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, while the first generation uses about 43 ft (13 m). Cutting film along sliding door tracks or removing a tailgate adds labor to the job. The final cost follows the chosen film type and the number of panels on the Justy being wrapped.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Justy wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Justy, fifth generation, factory photo
Factory color shown

2016–2020 Justy van (fifth generation)

2016–2020van (5 doors)145.7 in (3,700 mm)

The fifth generation Subaru Justy from 2016 to 2020 has sliding side doors that set where the film is cut. The door tracks stay bare, so the vinyl wrap ends at the edge of the tracks rather than covering them. This clean line follows the track shape and keeps the door moving freely. The 5-door van body is 145.7 in (3,700 mm) long and needs about 56 ft (17 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Subaru Justy, fourth generation, factory photo
Factory color shown

2007–2011 Justy hatchback (fourth generation)

2007–2011hatchback (5 doors)142.1 in (3,610 mm)

The fourth generation Subaru Justy from 2007 to 2011 is a 5-door hatchback where paint age matters before a wrap. Panels on a car of these years may be original or repainted, and a test spot is done before a full vinyl wrap. The test spot shows whether the film adheres well to the old paint. This generation is 142.1 in (3,610 mm) long and uses about 48 ft (14.5 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Subaru Justy, third generation, factory photo
Factory color shown

2003–2007 Justy hatchback (third generation)

2003–2007hatchback (5 doors)148.4 in (3,770 mm)

The third generation Subaru Justy from 2003 to 2007 has a 5-door hatchback body that affects how much film is needed. At 148.4 in (3,770 mm) long, it is the longest Justy in the catalog and takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. The tailgate with the rear glass in it means the film ends at the edge of the glass. The number of panels on this generation is typical for a compact minivan of its size.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Subaru Justy, second generation, factory photo
Factory color shown

1995–2003 Justy hatchback (second generation)

1995–2003hatchback (3 or 5 doors)147.4 in (3,745 mm) to 151.4 in (3,845 mm)

The second generation Subaru Justy from 1995 to 2003 comes as a hatchback with either 3 or 5 doors, which changes the film amount. The body length runs from 147.4 in (3,745 mm) to 151.4 in (3,845 mm), so the 5-door version needs more film than the 3-door. A full wrap of this generation uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. The tailgate with the rear glass in it has the film ending at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Subaru Justy, first generation, factory photo
Factory color shown

1984–1995 Justy hatchback (first generation)

1984–1995hatchback (3 or 5 doors)145.5 in (3,695 mm)

The first generation Subaru Justy from 1984 to 1995 was restyled in 1988, so bumpers and lights changed between the early and late versions. Film cut for one version does not fit the other because the panel shapes are different. An installer needs to know which version of the Justy is in the shop before cutting the vinyl wrap. The first generation is 145.5 in (3,695 mm) long and uses about 43 ft (13 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Justy

A partial wrap on a Subaru Justy covers the roof, hood, and mirror caps with vinyl film instead of the whole car. Justy chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end of the Justy to guard the paint. These jobs use less film and time than a full wrap of the Justy.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Justy: body, cut-outs and film

The Subaru Justy vinyl wrap follows the size and shape of a compact minivan that was sold as a 5-door van or hatchback. The fifth generation is 145.7 in (3,700 mm) long, so a full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. The 3-door hatchback of the second generation covers a smaller surface than the 5-door body. Knowing the exact body style before cutting film prevents waste on the shorter or longer panels.

Justy wrap ideas start with deciding which parts come off or need cut-outs on this car. On the fifth generation the sliding side doors have tracks that stay bare, and the film is cut along them. Earlier generations have a tailgate with the rear glass in it, where the film ends at the edge of the glass. Removing door handles and mirrors gives a cleaner edge around those parts.

How much vinyl to wrap a Justy changes between the five generations because the bodies are close in size but not identical. The fourth generation is the shortest at 142.1 in (3,610 mm) and uses about 48 ft (14.5 m) of cast film. The third generation is the longest at 148.4 in (3,770 mm) and needs about 49 ft (15 m) for a standard wrap. Someone counting film should check the exact length of the generation being wrapped.

Questions about wrapping a Subaru Justy

How much vinyl does it take to wrap a Subaru Justy?

A full wrap of a Subaru Justy takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for the newest fifth generation body. Chrome or patterned film on the same Justy uses about 66 ft (20 m) because of the extra material for matching the pattern. Older generations of the Justy need a little less film, from about 43 ft (13 m) on the first generation.

Are the sliding doors of a Justy wrapped?

Yes, the sliding doors of a Justy are wrapped, but the door tracks stay bare. The vinyl film is cut along the edge of the tracks so the doors slide normally. This applies to the fifth generation Subaru Justy from 2016 to 2020, which has sliding side doors.

Can I wrap only the hood or the roof of a Justy?

Yes, you can wrap only the hood or the roof of a Justy as a partial wrap job. A partial wrap on the Justy can cover the roof, hood, and mirror caps with vinyl film. Chrome delete on the Justy covers the window trim and badges with black film. Paint protection film (PPF) is another option that covers the front end of the Justy with clear film.

Is a Justy hard to wrap?

A Justy is not hard to wrap, but some parts add work for an installer. The fifth generation has sliding side doors with tracks that stay bare and require careful cutting of the film. Earlier generations have a tailgate where the film ends at the edge of the glass. The Justy is a small car, and its size means a full wrap uses modest amounts of film.