Wraps by car

Subaru Levorg wrap

The Subaru Levorg wrap page covers the first-generation wagon produced since 2014 and the film a full vinyl wrap of the newest body takes. The Levorg is a mid-size five-door wagon sold in one generation, with a restyling in 2020. A complete color change wrap on the current body uses about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

Subaru Levorg, first generation, factory photo
Subaru Levorg, first generation. Factory color shown.

Subaru Levorg wrap colors and ideas

  • Levorg black wrap
  • Levorg white wrap
  • Levorg gray wrap
  • Levorg silver wrap
  • Levorg red wrap
  • Levorg blue wrap
  • Levorg green wrap
  • Levorg yellow wrap
  • Levorg orange wrap
  • Levorg purple wrap
  • Levorg pink wrap
  • Levorg teal wrap
  • Levorg brown wrap
  • Levorg gold wrap
  • Levorg chrome wrap
  • Levorg color shift wrap
  • Levorg carbon fiber wrap
  • Levorg camo and patterned wrap

How much vinyl to wrap a Subaru Levorg

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowwagon (5 doors)184.6 in (4,690 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Levorg wrap cost factors

Levorg wrap cost depends on the size of the car, the film chosen and the work in the cut-outs for the cameras and fog lamps. The 184.6 in (4,690 mm) body and the tailgate glass mean a full wrap needs about 62 ft (19 m) of cast film, while chrome or patterned film needs about 72 ft (22 m). Removing door handles, mirrors and trim pieces for a clean install also adds labor to the job.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Levorg wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Levorg, first generation, factory photo
Factory color shown

2014–now Levorg wagon (first generation)

2014–nowwagon (5 doors)184.6 in (4,690 mm)

The first-generation Levorg was restyled in 2020 with new bumpers and lights, so film cut for one version does not fit the other. The basic body shape of the 2014 to now wagon remains the same, but an installer cannot reuse templates across the restyling. A wrap shop needs separate patterns for pre-2020 and 2020-and-later Levorg front and rear ends.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Levorg

A partial wrap on a Levorg can cover the roof, the hood or the mirror caps as a smaller job. Levorg chrome delete covers the window trim and badges with black film to remove the bright finish. Paint protection film (PPF) is clear film applied to the front end of the Levorg to protect the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Levorg: body, cut-outs and film

A Subaru Levorg vinyl wrap has to cover a 184.6 in (4,690 mm) long five-door wagon body, so the install uses more film than a small hatchback. The tall rear pillars and the tailgate with glass in it add vertical surfaces that need careful stretching and trimming. The 62 ft (19 m) estimate for 60-inch (1.52 m) film allows for the roof, the hood, the bumpers and the sides of the Levorg.

Levorg wrap ideas must respect the cameras in the body and the fog lamps in the front bumper on every trim. The installer cuts the film around each camera lens and makes cut-outs for the fog lamps in the bumper film. The tailgate has the rear glass in it, so the film ends at the edge of the glass and does not cover the window.

How much vinyl to wrap a Levorg changes between the 2020 restyling and the years before it because the bumpers and lights are different. Film cut for a pre-2020 Levorg does not fit a 2020 or later car, so an installer measures the exact version before ordering. The overall length stays the same, but the front and rear shapes require fresh templates after the update.

Questions about wrapping a Subaru Levorg

How much vinyl does it take to wrap a Subaru Levorg?

A full wrap of a Subaru Levorg takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. The estimate covers the body of the 2014 to now wagon, while chrome or patterned film needs about 72 ft (22 m).

Which years of the Levorg take the same film cuts?

The 2020 restyling of the first-generation Levorg changed the bumpers and lights, so film cuts for 2014 to 2019 cars do not fit 2020 and later cars. Within the 2014 to 2019 range the cuts match, and within 2020 to now the cuts match.

Can I wrap only the hood or the roof of a Levorg?

Yes, you can wrap only the hood or the roof of a Levorg as a partial wrap. A partial job on this wagon often includes the hood, the roof and the mirror caps, while a chrome delete covers the window trim and badges.

Is a Levorg hard to wrap?

A Levorg wrap adds work because of the cameras in the body and the fog lamps in the front bumper on every trim. The installer must cut the film around each camera lens and make cut-outs for the fog lamps. The large tailgate with the rear glass in it also requires careful film ending at the edge of the glass.