Wraps by car

Subaru Tribeca wrap

A Subaru Tribeca wrap covers the full SUV body with either a color change or protective vinyl wrap. The Tribeca was produced in one generation from 2004 to 2014. A full wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

1generations19.5 mof film for a full wrap

Subaru Tribeca, first generation, factory photo
Subaru Tribeca, first generation. Factory color shown.

Subaru Tribeca wrap colors and ideas

  • Tribeca black wrap
  • Tribeca white wrap
  • Tribeca gray wrap
  • Tribeca silver wrap
  • Tribeca red wrap
  • Tribeca blue wrap
  • Tribeca green wrap
  • Tribeca yellow wrap
  • Tribeca orange wrap
  • Tribeca purple wrap
  • Tribeca pink wrap
  • Tribeca teal wrap
  • Tribeca brown wrap
  • Tribeca gold wrap
  • Tribeca chrome wrap
  • Tribeca color shift wrap
  • Tribeca carbon fiber wrap
  • Tribeca camo and patterned wrap

How much vinyl to wrap a Subaru Tribeca

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2014SUV (5 doors)189.8 in (4,821 mm) to 191.1 in (4,855 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Tribeca wrap cost factors

The Tribeca wrap cost depends on the amount of film, the number of cut-outs and the time to remove trim. A full wrap needs about 64 ft (19.5 m) of cast film, and a chrome or patterned film needs about 72 ft (22 m). The sunroof, possible roof rails, cameras and fog lamps add shop hours to the job. The restyled bumpers and lights from 2007 also affect how much trimming an installer does.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2007: bumpers and lights differ between the versions, and so do the film cuts.

Tribeca wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Tribeca, first generation, factory photo
Factory color shown

2004–2014 Tribeca SUV (first generation)

2004–2014SUV (5 doors)189.8 in (4,821 mm) to 191.1 in (4,855 mm)

The first generation Subaru Tribeca was produced from 2004 to 2014 with a restyling in 2007. That restyling changed the bumpers and lights, so film cut for one version does not fit the other. The body length stayed between 189.8 in (4,821 mm) and 191.1 in (4,855 mm) through the whole run. An installer needs to know the production year before cutting film for the front or rear end.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Tribeca

A Tribeca chrome delete covers the window trim and badges with black film, and a partial wrap can cover just the roof, hood or mirror caps. The sunroof on every trim means a roof wrap is cut around the opening. A hood wrap is a straightforward panel, while mirror caps are small and quick to wrap. Clear paint protection film (PPF) on the front end is another job that protects the bumper, hood and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Tribeca: body, cut-outs and film

The Subaru Tribeca vinyl wrap must fit an SUV body that measures 189.8 in (4,821 mm) to 191.1 in (4,855 mm) long. A full wrap includes the roof, hood, doors, fenders, bumpers and tailgate. The large flat side panels make cutting film straightforward for an installer. The tall tailgate and deep bumpers add film area compared with a smaller car.

Tribeca wrap ideas start with the tailgate, where the film ends at the edge of the rear glass. Every trim has a sunroof, so the roof film is cut around its opening. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Some trims have cameras in the body and fog lamps in the front bumper, so the film needs cut-outs around each lens and lamp.

How much vinyl to wrap a Tribeca changes with the restyling in 2007. Bumpers and lights changed at that point, so film cut for one version does not fit the other. A full wrap of a 2004 to 2006 body uses about the same film as a 2007 to 2014 body because the overall size is similar. Installers count the same 64 ft (19.5 m) for every production year of the Tribeca.

Questions about wrapping a Subaru Tribeca

How much vinyl does it take to wrap a Subaru Tribeca?

A full wrap of a Subaru Tribeca takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 72 ft (22 m). The measurement covers the body of the newest version, from 2007 to 2014.

Can the roof of a Tribeca be wrapped?

Yes, the roof of a Subaru Tribeca can be wrapped. Every trim has a sunroof, so the film is cut around its opening. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them.

Which years of the Tribeca take the same film cuts?

The film cuts for the Tribeca changed with the restyling in 2007. Cars from 2004 to 2006 take one set of cuts, and cars from 2007 to 2014 take another. The bumpers and lights changed at the restyling, so front and rear film patterns do not transfer between the two versions.

Can I wrap only the hood or the roof of a Tribeca?

Yes, you can wrap only the hood or the roof of a Tribeca as partial wrap jobs. A chrome delete covers the window trim and badges, and paint protection film goes on the front end. The roof has a sunroof to cut around, while the hood is a single panel.