Wraps by car

Subaru Stella wrap

The Subaru Stella wrap page covers all three generations of this kei van sold from 2006 to today. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

3generations15 mof film for a full wrap

Subaru Stella, third generation, factory photo
Subaru Stella, third generation. Factory color shown.

Subaru Stella wrap colors and ideas

  • Stella black wrap
  • Stella white wrap
  • Stella gray wrap
  • Stella silver wrap
  • Stella red wrap
  • Stella blue wrap
  • Stella green wrap
  • Stella yellow wrap
  • Stella orange wrap
  • Stella purple wrap
  • Stella pink wrap
  • Stella teal wrap
  • Stella brown wrap
  • Stella gold wrap
  • Stella chrome wrap
  • Stella color shift wrap
  • Stella carbon fiber wrap
  • Stella camo and patterned wrap

How much vinyl to wrap a Subaru Stella

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowvan (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2011–2014van (4 or 5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2006–2011van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Stella wrap cost factors

The Stella wrap cost depends on the amount of material, the number of panels, and the state of the paint. All generations measure 133.7 in (3,395 mm), so a full wrap uses the same base film quantity. Chrome delete or a patterned film can add about 57 ft (17.5 m) to the material figure.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Stella wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Stella, third generation, factory photo
Factory color shown

2014–now Stella van (third generation)

2014–nowvan (5 doors)133.7 in (3,395 mm)

On the third generation Subaru Stella (2014–now), the sliding side doors decide where the film is cut. The door tracks stay bare, so the installer trims the vinyl along each track edge. The 2017 restyling changed the bumpers and lights, which affects the kits for the front and rear.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Subaru Stella, second generation, factory photo
Factory color shown

2011–2014 Stella van (second generation)

2011–2014van (4 or 5 doors)133.7 in (3,395 mm)

The second generation Subaru Stella (2011–2014) got a restyling in 2013. The new bumpers and lights do not share film cuts with the 2011–2012 models. Knowledge of the 133.7 in (3,395 mm) van body still guides the full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Subaru Stella, first generation, factory photo
Factory color shown

2006–2011 Stella van (first generation)

2006–2011van (5 doors)133.7 in (3,395 mm)

The first generation Subaru Stella (2006–2011) is a kei van whose paint age can vary widely. Panels may be original or repainted, so a test spot comes before a full wrap. The sliding side doors also need the same track-aware trimming as later bodies.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Stella

A Subaru Stella chrome delete includes window trim and badges on any generation. Partial wrap jobs cover the roof, hood, and mirror caps. Paint protection film (PPF) is clear film on the front end for a subtler change.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Subaru Stella: body, cut-outs and film

The Subaru Stella vinyl wrap work is shaped by the tall, flat-sided van body with five doors. The standard length of 133.7 in (3,395 mm) is the same across all generations, so the side panels and roof take most of the film. The vertical sides and small front end make a full color change straightforward to plan.

Stella wrap ideas start with the sliding side doors, because their tracks stay bare and the film is cut along them. The installer must trim carefully where the door travels, leaving the track area free of film. The side mirrors and door handles are removed to keep the wrap edges clean.

For someone counting film with how much vinyl to wrap a Stella, the three generations are very close. The body length did not change, and the only major note is that the 2017 restyling of the third generation changed bumper and light shapes. Codes LA150, LA160, LA100, LA110, and RN share the same 49 ft (15 m) estimate.

Questions about wrapping a Subaru Stella

How much vinyl does it take to wrap a Subaru Stella?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Subaru Stella. This figure is for the third generation body, which is 133.7 in (3,395 mm) long. Chrome or patterned film raises the estimate to about 57 ft (17.5 m).

Are the sliding doors of a Stella wrapped?

No, the sliding doors of a Stella are not fully wrapped. The door tracks stay bare, and the film is cut along them so the door can open and close without catching.

Which years of the Stella take the same film cuts?

The 2006–2011 Stella and the 2011–2014 Stella share the same 133.7 in (3,395 mm) body length but different bumpers. Only the 2014–now Stella keeps the same cuts before and after 2017, although the restyling changed the front and rear.

Can I wrap only the hood or the roof of a Stella?

Yes, you can wrap only the hood or the roof of a Stella. This partial wrap also suits the mirror caps. A chrome delete for window trim and badges is another small job.