A color change to an MR Wagon wrapped in black starts by picking the finish, because matte, satin, gloss and metallic each read differently on the van. Then pick a film line, as 22 brands supply 279 black films with their own feel for installers. The third-generation body has sliding side doors, so the film is cut along the bare door tracks. The first and second generations have a tailgate with the rear glass in it, where the film ends at the edge of the glass.

Factory paint condition decides how much preparation a black wrap needs, especially on the second generation from 2006–2010 where panels may be original or repainted. A test spot on each panel shows whether the film will hold before the full wrap goes on. On all MR Wagon bodies, seams are planned along panel edges and the door tracks on the third generation. The film is about 46 ft (14 m) for chrome or patterned options on the first generation.

The black wrap is removable when the car is returned to stock, and hand wash care keeps the film clean. Use a soft sponge and pH-neutral soap, because a pressure washer can lift edges near the sliding door tracks. The film does not bond into the factory paint, so removal leaves the paint as it was underneath. Avoid automatic car washes with brushes on the MR Wagon.