Wraps by car

Tesla Model 3 wrap

The Tesla Model 3 wrap page covers the single generation of this electric sedan, produced from 2017 to now. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The car is 184.8 in (4,694 mm) to 185.8 in (4,720 mm) long depending on the production year.

1generations14.5 mof film for a full wrap

Tesla Model 3, first generation, factory photo
Tesla Model 3, first generation. Factory color shown.

Tesla Model 3 wrap colors and ideas

  • Tesla Model 3 black wrap
  • Tesla Model 3 white wrap
  • Tesla Model 3 gray wrap
  • Tesla Model 3 silver wrap
  • Tesla Model 3 red wrap
  • Tesla Model 3 blue wrap
  • Tesla Model 3 green wrap
  • Tesla Model 3 yellow wrap
  • Tesla Model 3 orange wrap
  • Tesla Model 3 purple wrap
  • Tesla Model 3 pink wrap
  • Tesla Model 3 teal wrap
  • Tesla Model 3 brown wrap
  • Tesla Model 3 gold wrap
  • Tesla Model 3 chrome wrap
  • Tesla Model 3 color shift wrap
  • Tesla Model 3 carbon fiber wrap
  • Tesla Model 3 camo and patterned wrap

How much vinyl to wrap a Tesla Model 3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowsedan (4 doors)184.8 in (4,694 mm) to 185.8 in (4,720 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Tesla Model 3 wrap cost factors

Tesla Model 3 wrap cost depends on the size of the car, the film type, and the complexity of the installation. The car is 184.8 in (4,694 mm) to 185.8 in (4,720 mm) long, which affects the amount of film needed. Chrome or patterned film takes about 61 ft (18.5 m) compared to 48 ft (14.5 m) for standard cast film. Additional work such as removing trim pieces or wrapping the charge port door separately can increase the labor involved.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

Tesla Model 3 wraps by generation

Swipe sideways. Tap a card for the full description.

Tesla Model 3, first generation, factory photo
Factory color shown

2017–now Tesla Model 3 sedan (first generation)

2017–nowsedan (4 doors)184.8 in (4,694 mm) to 185.8 in (4,720 mm)

The glass roof of the Tesla Model 3 is not wrapped, so it stays dark whatever the color of the film. This means the roof panel area is smaller than on a car with a metal roof. The film ends at the roof rails, leaving the glass exposed. A full wrap of a Tesla Model 3 therefore uses less material on the roof than a similar sedan with a painted roof.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Tesla Model 3

The Tesla Model 3 chrome delete is a job that covers the window trim and badges with black film. A partial wrap can include the hood, mirror caps, or trunk lid instead of the whole car. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips. These smaller jobs use less film and can be done without covering the glass roof.

  • Partial wrap: hood, mirror caps, trunk lid.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Tesla Model 3: body, cut-outs and film

The Tesla Model 3 vinyl wrap covers a mid-size sedan with four doors and a length from 184.8 in (4,694 mm) to 185.8 in (4,720 mm). The body has no sharp creases, which keeps the film installation straightforward. The glass roof reduces the amount of material needed for the roof panel. Wrapping a Tesla Model 3 requires careful film cuts around the door handles and the charge port door.

Tesla Model 3 wrap ideas start with the cameras in the body, where the film is cut around each lens. Every trim has a panoramic glass roof, so the film ends at the roof rails. Some trims have fog lamps in the front bumper, which require cut-outs in the bumper film. The charge port door is wrapped as a small piece of its own on this electric car.

How much vinyl to wrap a Tesla Model 3 depends on the body style, which is only a four-door sedan. The first generation runs from 2017 to now, with a restyling in 2023 that changed the length from 184.8 in (4,694 mm) to 185.8 in (4,720 mm). The film estimate of about 48 ft (14.5 m) applies to the newest body. Chrome or patterned film requires more material, about 61 ft (18.5 m).

Questions about wrapping a Tesla Model 3

How much vinyl does it take to wrap a Tesla Model 3?

About 48 ft (14.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Tesla Model 3. This figure applies to the newest body of the first generation. Chrome or patterned film requires about 61 ft (18.5 m). The estimate includes the sedan body from 2017 to now.

Can the roof of a Tesla Model 3 be wrapped?

No, the roof of a Tesla Model 3 cannot be wrapped. Every trim has a panoramic glass roof, and the film ends at the roof rails. The glass remains exposed and dark regardless of the wrap color.

Which years of the Tesla Model 3 take the same film cuts?

The Tesla Model 3 is a single generation produced from 2017 to now, with a restyling in 2023. Before the restyling, the body was 184.8 in (4,694 mm) long, and after it is 185.8 in (4,720 mm) long. Film cuts differ slightly between the pre-restyling and post-restyling cars. The overall shape remains the same, but the length change affects the amount of material for the full wrap.

Can I wrap only the hood or the roof of a Tesla Model 3?

Yes, you can wrap only the hood or the roof of a Tesla Model 3. A partial wrap can cover the hood, mirror caps, or trunk lid as individual pieces. The roof is glass and is not wrapped, so a roof wrap is not possible. Chrome delete on window trim and badges is another smaller job.