Wraps by car

Tesla Roadster wrap

The Tesla Roadster wrap page covers both generations of this electric sports car, from 2006 to the present. A full vinyl wrap on the newest body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. The earlier car, built from 2006 to 2012, needs about 38 ft (11.5 m) of the same width.

2generations13 mof film for a full wrap

Tesla Roadster, second generation, factory photo
Tesla Roadster, second generation. Factory color shown.

Tesla Roadster wrap colors and ideas

  • Roadster black wrap
  • Roadster white wrap
  • Roadster gray wrap
  • Roadster silver wrap
  • Roadster red wrap
  • Roadster blue wrap
  • Roadster green wrap
  • Roadster yellow wrap
  • Roadster orange wrap
  • Roadster purple wrap
  • Roadster pink wrap
  • Roadster teal wrap
  • Roadster brown wrap
  • Roadster gold wrap
  • Roadster chrome wrap
  • Roadster color shift wrap
  • Roadster carbon fiber wrap
  • Roadster camo and patterned wrap

How much vinyl to wrap a Tesla Roadster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowconvertible (2 doors)177.2 in (4,500 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
2006–2012convertible (2 doors)155.4 in (3,946 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m)

Roadster wrap cost factors

Roadster wrap cost depends on the body size, the choice of film, and how much of the car is wrapped. The newer Roadster is 177.2 in (4,500 mm) long, so it uses more material than the 155.4 in (3,946 mm) first generation. A color change wrap with a standard cast film needs about 43 ft (13 m) on the new car, but chrome or patterned film adds up to 54 ft (16.5 m). The shop also factors in time for removing parts like the mirrors and dealing with the charge port door.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Roadster wraps by generation

Swipe sideways. Tap a card for the full description.

Tesla Roadster, second generation, factory photo
Factory color shown

2017–now Roadster convertible (second generation)

2017–nowconvertible (2 doors)177.2 in (4,500 mm)

The second-generation Tesla Roadster has an open top that is not wrapped when the car is a convertible with a fabric roof. The film ends where the top begins, leaving a clean line at the beltline. If the car has a folding hard top, those panels are wrapped as pieces of their own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Tesla Roadster, first generation, factory photo
Factory color shown

2006–2012 Roadster convertible (first generation)

2006–2012convertible (2 doors)155.4 in (3,946 mm)

On a first-generation Roadster from 2006 to 2012, paint age matters before a full wrap. Panels may be original or repainted, so a test spot on an inconspicuous area checks that the film will adhere and remove cleanly. Any loose or failing paint is addressed first.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).

Roof, hood, chrome delete and PPF on a Roadster

A partial wrap on a Tesla Roadster can cover the hood, mirror caps, and rear deck. Roadster chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Tesla Roadster: body, cut-outs and film

A Tesla Roadster vinyl wrap has to follow the convertible body, where the fabric top is not covered and the film ends where it begins. The newest Roadster is 177.2 in (4,500 mm) long, while the first generation measures 155.4 in (3,946 mm). Both have two doors, so the side panels are one long piece from the front fender to the rear quarter.

Roadster wrap ideas should start with the charge port door, which is wrapped as a small piece of its own on this electric car. The door handles and side mirrors come off for a clean edge, and the badges are removed before film goes on. A fabric top is not wrapped, so the film stops at the beltline, while a folding hard top gets its own panels.

How much vinyl to wrap a Roadster changes by a full 5 ft (1.5 m) between generations. The second-generation body, sold since 2017, calls for 43 ft (13 m) of 60-inch (1.52 m) cast film. The first-generation car, from 2006 to 2012, uses 38 ft (11.5 m). Patterned or chrome film adds waste, bringing the totals to about 54 ft (16.5 m) and 43 ft (13 m).

Questions about wrapping a Tesla Roadster

How much vinyl does it take to wrap a Tesla Roadster?

It takes about 43 ft (13 m) of 60-inch (1.52 m) cast film to wrap a Tesla Roadster of the newest generation. That figure covers a full color change wrap on the second-generation body sold since 2017.

Is the top of a Roadster wrapped?

No, the fabric top of a Roadster is not wrapped. The film ends where the top begins, and only a folding hard top would be wrapped as separate panels.

Can I wrap only the hood or the roof of a Roadster?

Yes, you can wrap only the hood and mirror caps, or the rear deck, as a partial wrap. A Roadster chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) is also an option for the front end.

Is a Roadster hard to wrap?

Yes, a Roadster adds work because of its convertible body and electric charge port door. The fabric top is left unwrapped, so the film must end neatly at the beltline, and the charge port door is wrapped as a small piece of its own. The newest body is 177.2 in (4,500 mm) long, which means long side panels with few seams.