Wraps by car

Tofas Murat 124 wrap

This page covers the Tofas Murat 124 wrap, a vinyl wrap for the subcompact sedan built from 1971 to 1977. The Murat 124 has one generation in this catalog. A full wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Tofas Murat 124, first generation, factory photo
Tofas Murat 124, first generation. Factory color shown.

Tofas Murat 124 wrap colors and ideas

  • Murat 124 black wrap
  • Murat 124 white wrap
  • Murat 124 gray wrap
  • Murat 124 silver wrap
  • Murat 124 red wrap
  • Murat 124 blue wrap
  • Murat 124 green wrap
  • Murat 124 yellow wrap
  • Murat 124 orange wrap
  • Murat 124 purple wrap
  • Murat 124 pink wrap
  • Murat 124 teal wrap
  • Murat 124 brown wrap
  • Murat 124 gold wrap
  • Murat 124 chrome wrap
  • Murat 124 color shift wrap
  • Murat 124 carbon fiber wrap
  • Murat 124 camo and patterned wrap

How much vinyl to wrap a Tofas Murat 124

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1971–1977sedan (4 doors)159.2 in (4,043 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Murat 124 wrap cost factors

Murat 124 wrap cost depends on the film type, the amount of surface area, and the condition of the body. The car is 159.2 in (4,043 mm) long, and a full wrap uses about 46 ft (14 m) of 60-inch (1.52 m) film. Labor increases if panels need paint correction before wrapping or if many parts are removed.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: sedan (4 doors).

Murat 124 wraps by generation

Swipe sideways. Tap a card for the full description.

Tofas Murat 124, first generation, factory photo
Factory color shown

1971–1977 Murat 124 sedan (first generation)

1971–1977sedan (4 doors)159.2 in (4,043 mm)

The first generation Tofas Murat 124 was produced from 1971 to 1977 as a four-door sedan. Panels on a car of these years may be original or repainted, so a test spot comes before a full wrap. The wrap installer checks adhesion on each panel because old paint can vary.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Murat 124

Partial wrap options for the Murat 124 include the roof, hood, and mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Tofas Murat 124: body, cut-outs and film

A Tofas Murat 124 vinyl wrap covers a compact four-door sedan that is 159.2 in (4,043 mm) long. The simple body style means fewer complex curves and a straightforward film layout. Most of the surface is flat or gently curved, so the film can be applied efficiently.

Murat 124 wrap ideas include removing door handles, mirrors, and trim for a clean install. The front and rear bumpers need cut-outs around lights and grille openings. The window trim and badges are common areas for chrome delete with black film.

When planning how much vinyl to wrap a Murat 124, the main calculation is the film estimate of about 46 ft (14 m) for a full wrap. Since there is only one generation, there are no body changes between years to adjust for. Extra film is needed for pattern matching or wrapping door jambs.

Questions about wrapping a Tofas Murat 124

How much vinyl does it take to wrap a Tofas Murat 124?

A full wrap of a Tofas Murat 124 takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. This estimate covers the sedan body, including the roof, hood, trunk, and sides. Slight extra film is needed for wrapped edges and door jambs.

Can I wrap only the hood or the roof of a Murat 124?

Yes, you can wrap only the hood or the roof of a Murat 124. Partial wrap jobs include the roof, hood, and mirror caps as separate options. A partial wrap uses less film and leaves the rest of the paint exposed.

Is a Murat 124 hard to wrap?

A Murat 124 is not the most difficult car to wrap, but its age adds work. The body is a simple four-door sedan with few complex curves. You may need to remove more trim and test paint adhesion because of possible repainted panels.

How many generations of the Murat 124 does this page cover?

This page covers one generation of the Murat 124. The first generation was produced from 1971 to 1977. All Murat 124s in this catalog share the same body dimensions and film estimate.