An Aurion wrapped in orange begins with choosing the finish, then the film, then whether to go full or partial for the color change. Matte and satin films give a flatter, non-reflective look, while gloss and high gloss reflect more light and deepen the orange. Metallic, candy, and glitter films add flake or depth for a show-car effect. On this full-size sedan, a full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

The factory paint under the wrap must be clean and smooth before the film goes on, especially on the Aurion's large sedan panels. Any chips, rust, or peeling clear coat should be repaired first, because the film will follow the surface underneath. Seams are planned along body lines and edges so they are less visible, and the installer may tuck film into panel gaps. The 190.4 in (4,835 mm) length means long roof and quarter panels need careful film handling.

An orange wrap on the Aurion is removable, and with proper care a hand wash keeps the finish even. Use a pH-neutral car shampoo and a soft mitt, then rinse with low pressure. Avoid automatic car washes with brushes, which can lift edges or scratch the film. The wrap can be removed later without changing the factory paint if it was originally in good condition.