Wraps by car

Toyota Aurion wrap

This page covers the Toyota Aurion sedan and its two generations, the 2006–2012 first generation and the 2012–2017 second generation. A full vinyl wrap of the newest Aurion body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 69 ft (21 m).

2generations18 mof film for a full wrap

Toyota Aurion, second generation, factory photo
Toyota Aurion, second generation. Factory color shown.

Toyota Aurion wrap colors and ideas

  • Aurion black wrap
  • Aurion white wrap
  • Aurion gray wrap
  • Aurion silver wrap
  • Aurion red wrap
  • Aurion blue wrap
  • Aurion green wrap
  • Aurion yellow wrap
  • Aurion orange wrap
  • Aurion purple wrap
  • Aurion pink wrap
  • Aurion teal wrap
  • Aurion brown wrap
  • Aurion gold wrap
  • Aurion chrome wrap
  • Aurion color shift wrap
  • Aurion carbon fiber wrap
  • Aurion camo and patterned wrap

How much vinyl to wrap a Toyota Aurion

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2017sedan (4 doors)190.4 in (4,835 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2006–2012sedan (4 doors)190.0 in (4,825 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Aurion wrap cost factors

The Aurion wrap cost depends on the film choice, the number of panels wrapped, and the condition of the paint on a car of this age. A full wrap of this 190.4 in (4,835 mm) sedan takes more film and more labor than a roof or hood only. Paint chips, deep scratches, or old clear coat need correction before the vinyl goes down, which adds to the work.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Aurion wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Aurion, second generation, factory photo
Factory color shown

2012–2017 Aurion sedan (second generation)

2012–2017sedan (4 doors)190.4 in (4,835 mm)

The second-generation Toyota Aurion was produced from 2012 to 2017 as a four-door sedan. On a car of these years the paint may be original or repainted, so a test spot on each panel comes before a full wrap. A test spot tells you whether the film will lift old clear coat or pull a respray.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Toyota Aurion, first generation, factory photo
Factory color shown

2006–2012 Aurion sedan (first generation)

2006–2012sedan (4 doors)190.0 in (4,825 mm)

The first-generation Toyota Aurion was built from 2006 to 2012 with the same four-door sedan body. Its 190.0 in (4,825 mm) length means a full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. The sedan shape gives you a roof, hood, trunk, two bumpers, and four doors to wrap, which is the standard panel set for the film estimate.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Aurion

A partial wrap on the Toyota Aurion can cover the roof, the hood, or the mirror caps as separate jobs. The chrome delete option covers the window trim and the badges with black film to change the brightwork. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Aurion: body, cut-outs and film

The Toyota Aurion vinyl wrap covers a full-size sedan with four doors and a length of 190.4 in (4,835 mm) for the second generation. The sedan body keeps the roof and pillars short, so most of the film goes onto the long hood, trunk, doors, and bumpers. A wrap on this car means working around the door handles, mirrors, and the trim lines on all four doors.

Aurion wrap ideas often begin with the front bumper, side mirrors, and door handles, which need cut-outs for the grille, fog lights, and sensors. The badges and the window trim come off for a clean edge and are refitted after the film is down. The door handles and mirror caps are wrapped off the car, so the film tucks behind them cleanly.

When counting how much vinyl to wrap an Aurion, the second generation is 190.4 in (4,835 mm) long and the first is 190.0 in (4,825 mm). The body shape stayed a four-door sedan for both generations, so the panel count and the main dimensions barely move. A full wrap of either generation uses about 59 ft (18 m) of cast film, or 69 ft (21 m) of chrome or patterned film.

Questions about wrapping a Toyota Aurion

How much vinyl does it take to wrap a Toyota Aurion?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap a Toyota Aurion, and about 69 ft (21 m) of chrome or patterned film. The first and second generations both measure around 190 inches long, so the film estimate stays the same.

Can I wrap only the hood or the roof of an Aurion?

Yes, you can wrap only the hood or the roof of an Aurion. A partial wrap on this car can cover the roof, the hood, or the mirror caps as separate jobs without wrapping the whole sedan.

Is an Aurion hard to wrap?

An Aurion is not hard to wrap for a shop installer, but it adds work in a few places. The front bumper has grille and fog light openings, the door handles and mirror caps come off, and the long doors on this 190-inch sedan take large panels of film.

How many generations of the Aurion does this page cover?

This page covers two generations of the Aurion: the first generation from 2006 to 2012 and the second generation from 2012 to 2017.