Wraps by car

Toyota Venza wrap

The Toyota Venza wrap page covers both generations of the Venza: the first (2008–2016) and the second (2020–now). It lists the film a full wrap of each body takes, the parts that need cut-outs, and the smaller jobs an owner can choose. The newest Venza needs about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl wrap for a full color change.

2generations19 mof film for a full wrap

Toyota Venza, second generation, factory photo
Toyota Venza, second generation. Factory color shown.

Toyota Venza wrap colors and ideas

  • Venza black wrap
  • Venza white wrap
  • Venza gray wrap
  • Venza silver wrap
  • Venza red wrap
  • Venza blue wrap
  • Venza green wrap
  • Venza yellow wrap
  • Venza orange wrap
  • Venza purple wrap
  • Venza pink wrap
  • Venza teal wrap
  • Venza brown wrap
  • Venza gold wrap
  • Venza chrome wrap
  • Venza color shift wrap
  • Venza carbon fiber wrap
  • Venza camo and patterned wrap

How much vinyl to wrap a Toyota Venza

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)186.6 in (4,740 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2008–2016SUV (5 doors)189.0 in (4,801 mm) to 190.3 in (4,833 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Venza wrap cost factors

Venza wrap cost depends on the generation, the number of door jambs you wrap, and the finish of the film. On the 2008–2016 Venza every trim has a panoramic glass roof, so the roof area is smaller, which lowers the film needed for that generation. On both generations the tailgate glass is left unwrapped, and the film ends at the edge of the glass. A full two-tone wrap or a chrome delete adds more labor to the job.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Venza wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Venza, second generation, factory photo
Factory color shown

2020–now Venza SUV (second generation)

2020–nowSUV (5 doors)186.6 in (4,740 mm)

The second-generation Toyota Venza (2020–now) is a five-door SUV that is 186.6 in (4,740 mm) long, and a full wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Because the body has four doors plus a tailgate, a wrap of this Venza uses about a dozen main panels. The 60-inch width of the film covers the roof without a seam.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Toyota Venza, first generation, factory photo
Factory color shown

2008–2016 Venza SUV (first generation)

2008–2016SUV (5 doors)189.0 in (4,801 mm) to 190.3 in (4,833 mm)

The first-generation Toyota Venza (2008–2016) is a five-door SUV that runs from 189.0 in (4,801 mm) to 190.3 in (4,833 mm) long, and a full wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Paint on a car of these years may be original or repainted, so a test spot of the film on each panel tells you if the clear coat is stable before you commit to a full wrap. A 2012 restyle changed the front and rear ends, but the panel area stays close. Every trim has a panoramic glass roof, so the roof film is cut to the rails and the glass is left unwrapped.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Venza

A partial wrap on a Toyota Venza can be the roof, the hood, the mirror caps, or any combination of those panels. A Venza chrome delete covers the window trim and badges with black film, and it is a standalone job on any generation. Paint protection film (PPF) is clear film on the front end, including the bumper, the hood, and the fenders. If you only want to change the look of the roof, a partial wrap uses far less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Venza: body, cut-outs and film

A Toyota Venza vinyl wrap on the 2020–now body covers a five-door SUV that is 186.6 in (4,740 mm) long. That size means the roof, tailgate, and the four doors are the large panels that take most of the film. The earlier body runs from 189.0 in (4,801 mm) to 190.3 in (4,833 mm), so a wrap of that generation uses a similar panel count. A full wrap of either Venza is a two-person job because the roof and tailgate are wide.

Venza wrap ideas start with the tailgate, because every Venza has a tailgate with the rear glass in it, and the film ends at the edge of the glass. On the 2008–2016 body, every trim has a panoramic glass roof: the glass is not wrapped, and the film ends at the roof rails. The same generation also has a sunroof on every trim, so the roof film is cut around its opening. Every trim has parking sensors in the bumpers, and the film is cut around each sensor.

How much vinyl to wrap a Venza changes between generations, because the first body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film while the second takes about 62 ft (19 m). If you order chrome or patterned film, add about 6 ft (2 m) to each figure for matching the pattern. A first-generation Venza with a 2012 restyle may have different bumper shapes, but the film area stays the same. Counting film for a Venza means checking which generation you have before you order.

Questions about wrapping a Toyota Venza

How much vinyl does it take to wrap a Toyota Venza?

A Toyota Venza of the 2020–now generation takes about 62 ft (19 m) of 60-inch (1.52 m) vinyl wrap for a full color change. That figure is for cast film on the second-generation body, with the tailgate glass left unwrapped. The first-generation Venza takes about 56 ft (17 m) of the same width film. If you use chrome or patterned film, order about 70 ft (21.5 m) for the newer body.

Can I wrap only the hood or the roof of a Venza?

Yes, you can wrap only the hood or the roof of a Venza. A partial wrap can be the roof, the hood, the mirror caps, or a mix of those panels. The roof alone on a Venza uses less film than a full wrap because the tailgate glass is not covered. A hood wrap is a smaller job that still protects the paint from stone chips.

Is a Venza hard to wrap?

A Venza is not hard to wrap for a shop used to SUVs, but it has parts that add work. Every Venza has a tailgate with the rear glass in it, and the film ends at the edge of the glass. On the 2008–2016 Venza every trim has a panoramic glass roof, so the roof film is cut around the rails and the glass. That same generation has parking sensors in the bumpers, and the film is cut around each sensor.

How many generations of the Venza does this page cover?

This page covers two generations of the Venza: the first from 2008 to 2016 and the second from 2020 to now. The first generation has a restyle in 2012, but it is the same body style. The page gives the film amounts for both bodies and the wrap facts that change between them.