Wraps by car

Toyota Prius Plug-In wrap

The Toyota Prius Plug-In wrap page covers three generations of this compact liftback. A vinyl wrap in the current body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The newest shape listed is the fifth generation, sold from 2023 onward.

3generations

Toyota Prius Plug-In, fifth generation, factory photo
Toyota Prius Plug-In, fifth generation. Factory color shown.

Toyota Prius Plug-In wrap colors and ideas

  • Prius Plug-In black wrap
  • Prius Plug-In white wrap
  • Prius Plug-In gray wrap
  • Prius Plug-In silver wrap
  • Prius Plug-In red wrap
  • Prius Plug-In blue wrap
  • Prius Plug-In green wrap
  • Prius Plug-In yellow wrap
  • Prius Plug-In orange wrap
  • Prius Plug-In purple wrap
  • Prius Plug-In pink wrap
  • Prius Plug-In teal wrap
  • Prius Plug-In brown wrap
  • Prius Plug-In gold wrap
  • Prius Plug-In chrome wrap
  • Prius Plug-In color shift wrap
  • Prius Plug-In carbon fiber wrap
  • Prius Plug-In camo and patterned wrap

How much vinyl to wrap a Toyota Prius Plug-In

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowliftback (5 doors)——
2016–nowliftback (5 doors)182.9 in (4,645 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2012–2016liftback (5 doors)175.6 in (4,460 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Prius Plug-In wrap cost factors

Prius Plug-In wrap cost depends on the size of the car, the film chosen, and the work the body needs. The fourth generation is 182.9 in (4,645 mm) long and takes about 52 ft (16 m) of cast film. Chrome or patterned film raises the amount to about 69 ft (21 m) on that body. Cut-outs for cameras, fog lamps, and the charge port door add labor time.

  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Prius Plug-In wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Prius Plug-In, fifth generation, factory photo
Factory color shown

2023–now Prius Plug-In liftback (fifth generation)

2023–nowliftback (5 doors)

The fifth generation Toyota Prius Plug-In is a compact liftback sold from 2023 onward. Its five-door body keeps the panel count low, so the film is spread over large outer surfaces. The tailgate has the rear glass in it, and the film ends at the edge of the glass. The charge port door is wrapped as a small piece of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Toyota Prius Plug-In, fourth generation, factory photo
Factory color shown

2016–now Prius Plug-In liftback (fourth generation)

2016–nowliftback (5 doors)182.9 in (4,645 mm)

The fourth generation Toyota Prius Plug-In covers the XW50 body, sold from 2016 onward and restyled in 2017. This body is still current after 2023, so an owner of a car from those years must check which shape it is. The body is 182.9 in (4,645 mm) long and takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 69 ft (21 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Toyota Prius Plug-In, third generation, factory photo
Factory color shown

2012–2016 Prius Plug-In liftback (third generation)

2012–2016liftback (5 doors)175.6 in (4,460 mm)

The third generation Toyota Prius Plug-In was sold from 2012 to 2016 and is 175.6 in (4,460 mm) long. On a car of these years panels may be original or repainted, so a test spot comes before a full wrap. The wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) for chrome or patterned film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Prius Plug-In

A partial wrap on a Toyota Prius Plug-In covers the roof, hood, or mirror caps. Prius Plug-In chrome delete covers the window trim and badges with black film. Paint protection film on the front end is a clear film applied to the hood, bumper, and mirror caps.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Prius Plug-In: body, cut-outs and film

The Toyota Prius Plug-In vinyl wrap follows a five-door liftback body with a tailgate that includes the rear glass. The film ends at the edge of the glass on the tailgate, so the glass itself stays uncovered. This body style keeps the main panels large and the number of separate pieces moderate.

Prius Plug-In wrap ideas must account for cameras and fog lamps on the fourth and third generations. Every trim of those bodies has cameras in the body, and the film is cut around each lens. Front bumpers with fog lamps need cut-outs in the bumper film. Plug-in versions have a charge port door that is wrapped as a small piece of its own.

How much vinyl to wrap a Prius Plug-In changes between the generations in the catalog. The fourth generation needs about 52 ft (16 m) of 60-inch (1.52 m) cast film. The third generation needs about 56 ft (17 m) of the same film. A newer body from 2023 on is a fifth generation and uses the lower amount.

Questions about wrapping a Toyota Prius Plug-In

How much vinyl does it take to wrap a Toyota Prius Plug-In?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Toyota Prius Plug-In. That figure is for the fifth generation body sold from 2023 onward. The fourth generation uses the same amount, while the third generation needs about 56 ft (17 m).

Can I wrap only the hood or the roof of a Prius Plug-In?

Yes, you can wrap only the hood or the roof of a Prius Plug-In. A partial wrap of the roof, hood, or mirror caps is a smaller job than a full wrap. Chrome delete on the window trim and badges is also available. Paint protection film on the front end protects the hood and bumper.

Is a Prius Plug-In hard to wrap?

A Toyota Prius Plug-In is not especially hard to wrap, but a few details add work. The tailgate has rear glass in it, so the film ends at the edge of the glass. On the fourth and third generations every trim has cameras in the body, and the film is cut around each lens. Fog lamps in the front bumper need cut-outs, and the charge port door is wrapped as a small piece.

How many generations of the Prius Plug-In does this page cover?

This page covers three generations of the Toyota Prius Plug-In. The newest is the fifth generation, sold from 2023 onward. The fourth generation covers the XW50 body, sold from 2016 onward. The third generation was sold from 2012 to 2016.