Wraps by car

Toyota Aqua wrap

The Toyota Aqua wrap page covers the first and second generations of this subcompact hatchback. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap. The first generation, built from 2011 to 2021, needs about 48 ft (14.5 m) of the same film.

2generations16 mof film for a full wrap

Toyota Aqua, second generation, factory photo
Toyota Aqua, second generation. Factory color shown.

Toyota Aqua wrap colors and ideas

  • Aqua black wrap
  • Aqua white wrap
  • Aqua gray wrap
  • Aqua silver wrap
  • Aqua red wrap
  • Aqua blue wrap
  • Aqua green wrap
  • Aqua yellow wrap
  • Aqua orange wrap
  • Aqua purple wrap
  • Aqua pink wrap
  • Aqua teal wrap
  • Aqua brown wrap
  • Aqua gold wrap
  • Aqua chrome wrap
  • Aqua color shift wrap
  • Aqua carbon fiber wrap
  • Aqua camo and patterned wrap

How much vinyl to wrap a Toyota Aqua

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowhatchback (5 doors)159.4 in (4,050 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
2011–2021hatchback (5 doors)157.3 in (3,995 mm) to 159.6 in (4,055 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Aqua wrap cost factors

Aqua wrap cost depends on the amount of film, the number of panels, and the work needed on the tailgate and bumpers. The second generation takes about 52 ft (16 m) of cast film, and chrome or patterned film raises the amount to about 61 ft (18.5 m). A first-generation wrap uses about 48 ft (14.5 m) of standard film or about 59 ft (18 m) with chrome or pattern.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Aqua wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Aqua, second generation, factory photo
Factory color shown

2021–now Aqua hatchback (second generation)

2021–nowhatchback (5 doors)159.4 in (4,050 mm)

The Toyota Aqua second generation is a subcompact five-door hatchback that measures 159.4 in (4,050 mm) long. This body style has a tailgate with the rear glass in it, so the film ends at the edge of the glass rather than wrapping around it. The small size means fewer panels and less material than a mid-size car, making a full wrap more straightforward.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Toyota Aqua, first generation, factory photo
Factory color shown

2011–2021 Aqua hatchback (first generation)

2011–2021hatchback (5 doors)157.3 in (3,995 mm) to 159.6 in (4,055 mm)

The Toyota Aqua first generation from 2011 to 2021 has paint that may be original or repainted on some panels. Before a full wrap, a test spot on each panel checks adhesion, especially if the paint has been repaired. This step prevents lifting or damage when the film is removed later.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an Aqua

A partial wrap on an Aqua can cover the roof, hood, and mirror caps without wrapping the whole car. An Aqua chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Aqua: body, cut-outs and film

A Toyota Aqua vinyl wrap has to cover a five-door hatchback body with a tailgate that includes the rear glass. The second generation is 159.4 in (4,050 mm) long, while the first measures from 157.3 in (3,995 mm) to 159.6 in (4,055 mm). These compact dimensions mean a wrap uses fewer panels and less film than a larger car.

Aqua wrap ideas often start with the tailgate, where the film ends at the edge of the rear glass. The door handles, mirrors, and badges need cut-outs, and the mirrors can be removed for a cleaner edge. The front and rear bumpers have deep curves that require careful stretching and relief cuts.

To work out how much vinyl to wrap an Aqua, you need to know which generation you have. The first generation was restyled in 2014, but the overall length stayed within about 2 in (50 mm). The second generation is about 2 in (50 mm) longer than the earliest first-generation cars, so it needs roughly 4 ft (1.2 m) more film.

Questions about wrapping a Toyota Aqua

How much vinyl does it take to wrap a Toyota Aqua?

A Toyota Aqua needs about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap for the newest body. This estimate covers the second generation from 2021 onward. The first generation takes about 48 ft (14.5 m) of the same film.

Can I wrap only the hood or the roof of an Aqua?

Yes, you can wrap only the hood or the roof of an Aqua. A partial wrap can include the roof, hood, and mirror caps as separate jobs. This approach uses much less film than a full wrap.

Is an Aqua hard to wrap?

An Aqua adds work because the tailgate has the rear glass in it, so the film must end at the edge of the glass. The compact size means fewer panels, but the bumpers still have deep curves that need careful stretching. Overall, it is not the hardest car to wrap, but the tailgate and bumpers take extra time.

How many generations of the Aqua does this page cover?

This page covers two generations of the Toyota Aqua. The second generation is from 2021 to now, and the first generation is from 2011 to 2021. Each generation has its own film estimate and body notes.