Wraps by car

Toyota C-HR Plus wrap

The Toyota C-HR Plus wrap guide covers the first generation (2025–now) of this electric SUV. A full wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The C-HR Plus is a five-door SUV with a length of 178.3 in (4,530 mm). Chrome or patterned film requires about 69 ft (21 m) for a complete color change wrap.

1generations18.5 mof film for a full wrap

Toyota C-HR Plus, first generation, factory photo
Toyota C-HR Plus, first generation. Factory color shown.

Toyota C-HR Plus wrap colors and ideas

  • C-HR Plus black wrap
  • C-HR Plus white wrap
  • C-HR Plus gray wrap
  • C-HR Plus silver wrap
  • C-HR Plus red wrap
  • C-HR Plus blue wrap
  • C-HR Plus green wrap
  • C-HR Plus yellow wrap
  • C-HR Plus orange wrap
  • C-HR Plus purple wrap
  • C-HR Plus pink wrap
  • C-HR Plus teal wrap
  • C-HR Plus brown wrap
  • C-HR Plus gold wrap
  • C-HR Plus chrome wrap
  • C-HR Plus color shift wrap
  • C-HR Plus carbon fiber wrap
  • C-HR Plus camo and patterned wrap

How much vinyl to wrap a Toyota C-HR Plus

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV (5 doors)178.3 in (4,530 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

C-HR Plus wrap cost factors

C-HR Plus wrap cost depends on the size of the car and the parts that add labor. A full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) film, or about 69 ft (21 m) for chrome or patterned film. The cost also changes with the number of cut-outs, such as parking sensors and cameras on every trim. Roof rails or a panoramic glass roof on some trims add time because they are worked around or removed.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

C-HR Plus wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota C-HR Plus, first generation, factory photo
Factory color shown

2025–now C-HR Plus SUV (first generation)

2025–nowSUV (5 doors)178.3 in (4,530 mm)

The first generation Toyota C-HR Plus has some trims with a panoramic glass roof. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails, which are present on some trims. This means the roof area is smaller to wrap than on a car with a steel roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a C-HR Plus

A partial wrap on a Toyota C-HR Plus can cover the hood, mirror caps, and roof on cars without the glass panel. C-HR Plus chrome delete replaces the bright window trim and badges with black film. Paint protection film (PPF) is a clear film option for the front end of this car. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota C-HR Plus: body, cut-outs and film

A Toyota C-HR Plus vinyl wrap must cover a 178.3 in (4,530 mm) SUV with five doors. The tall body and long roof increase the amount of film compared with a smaller hatchback. Wrapping the tailgate means working around the rear glass, which is part of the tailgate itself. The size of this car calls for careful planning of panel seams on the large side surfaces.

C-HR Plus wrap ideas start with the parts that need cut-outs or come off. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Every trim also has cameras in the body, and the film is cut around each lens. The electric charge port door is wrapped as a small piece of its own.

How much vinyl to wrap a C-HR Plus changes little between generations because only one generation is in the catalog. The first generation (2025–now) is the only body style, an SUV with five doors. A film estimate for this generation is about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds up to about 69 ft (21 m) for the same body.

Questions about wrapping a Toyota C-HR Plus

How much vinyl does it take to wrap a Toyota C-HR Plus?

Yes, a full wrap of a Toyota C-HR Plus takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the amount is about 69 ft (21 m). These figures apply to the first generation (2025–now) body style.

Can the roof of a C-HR Plus be wrapped?

Yes, the roof of a C-HR Plus can be wrapped if the car does not have the panoramic glass roof. Some trims have a glass roof, and glass is not wrapped. On cars with roof rails, the rails are removed or the film is cut along them.

Can I wrap only the hood or the roof of a C-HR Plus?

Yes, you can wrap only the hood or the roof of a C-HR Plus. A partial wrap often covers the hood, mirror caps, and roof on cars without the glass panel. Chrome delete is another option for window trim and badges.

Is a C-HR Plus hard to wrap?

A C-HR Plus is not hard to wrap for a trained installer, but it has details that add work. Every trim has parking sensors and cameras, so the film must be cut around each one. The electric charge port door is wrapped as a separate piece. Some trims have a glass roof and roof rails, which require extra care.