Wraps by car

Toyota Pixis Mega wrap

A Toyota Pixis Mega wrap covers this tall mini van with vinyl wrap, and the catalog holds one generation of the car. The current first generation has been produced since 2015 and is still sold today. A full wrap of the newest body needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Toyota Pixis Mega, first generation, factory photo
Toyota Pixis Mega, first generation. Factory color shown.

Toyota Pixis Mega wrap colors and ideas

  • Pixis Mega black wrap
  • Pixis Mega white wrap
  • Pixis Mega gray wrap
  • Pixis Mega silver wrap
  • Pixis Mega red wrap
  • Pixis Mega blue wrap
  • Pixis Mega green wrap
  • Pixis Mega yellow wrap
  • Pixis Mega orange wrap
  • Pixis Mega purple wrap
  • Pixis Mega pink wrap
  • Pixis Mega teal wrap
  • Pixis Mega brown wrap
  • Pixis Mega gold wrap
  • Pixis Mega chrome wrap
  • Pixis Mega color shift wrap
  • Pixis Mega carbon fiber wrap
  • Pixis Mega camo and patterned wrap

How much vinyl to wrap a Toyota Pixis Mega

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowvan (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Pixis Mega wrap cost factors

Pixis Mega wrap cost depends on the size of the van and the condition of its surfaces. The body is 133.7 in (3,395 mm) long, and the tall roof adds working time from a platform. The sliding door tracks require careful cutting, which adds labor to the job.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Pixis Mega wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Pixis Mega, first generation, factory photo
Factory color shown

2015–now Pixis Mega van (first generation)

2015–nowvan (5 doors)133.7 in (3,395 mm)

The first generation Toyota Pixis Mega has sliding side doors whose tracks stay bare and decide where the film is cut. The tracks are a fixed detail of this generation, produced since 2015. The van has no other generation in the catalog, so this detail applies to every Pixis Mega made so far.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Pixis Mega

The Pixis Mega chrome delete covers window trim and badges with black film, and a partial wrap can include the roof, hood, or mirror caps. Paint protection film is also an option on this van, with clear film applied to the front end. These smaller jobs let an owner change one area without wrapping the whole van.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Pixis Mega: body, cut-outs and film

A Toyota Pixis Mega vinyl wrap has one body style to plan for: a five-door van with sliding side doors. The van is 133.7 in (3,395 mm) long and 72.2 in (1,835 mm) tall, so the roof adds an area many small cars do not have. The single body style keeps the wrap layout consistent between cars.

Pixis Mega wrap ideas begin with the sliding side doors, because the door tracks stay bare and the film is cut along them. The tall body means the roof is wrapped from a platform for safe access. The five doors and the tall sides make panel alignment the main detailing job.

To estimate how much vinyl to wrap a Pixis Mega, one generation of this van exists, so the film estimate is the same for every production year from 2015 onward. The first generation has one body style, which means a single set of panel sizes. The 51 ft (15.5 m) figure for cast film includes the roof.

Questions about wrapping a Toyota Pixis Mega

How much vinyl does it take to wrap a Toyota Pixis Mega?

A Toyota Pixis Mega takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. If the film is chrome or patterned, you need about 57 ft (17.5 m). The estimate covers the whole van, including the roof.

Are the sliding doors of a Pixis Mega wrapped?

The door tracks of a Pixis Mega stay bare, and the film is cut along them when the sliding doors are wrapped. The moving parts of the track are not covered because they must stay clear. The film stops at the track edge on each door.

Can I wrap only the hood or the roof of a Pixis Mega?

Yes, you can wrap only the hood or the roof of a Pixis Mega. A partial wrap on this van can include the roof, hood, or mirror caps. These areas are wrapped separately without doing the whole body.

Is a Pixis Mega hard to wrap?

A Pixis Mega is not a simple wrap because the sliding door tracks must stay bare and the film is cut along them. The tall body, at 72.2 in (1,835 mm), means the roof is wrapped from a platform. The five doors also add edges that need clean finishing.