Wraps by car

Toyota Mirai wrap

The Toyota Mirai wrap page covers the first and second generations of this hydrogen fuel cell sedan. A full wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The older generation from 2014–2020 needs slightly less, about 59 ft (18 m).

2generations18.5 mof film for a full wrap

Toyota Mirai, second generation, factory photo
Toyota Mirai, second generation. Factory color shown.

Toyota Mirai wrap colors and ideas

  • Mirai black wrap
  • Mirai white wrap
  • Mirai gray wrap
  • Mirai silver wrap
  • Mirai red wrap
  • Mirai blue wrap
  • Mirai green wrap
  • Mirai yellow wrap
  • Mirai orange wrap
  • Mirai purple wrap
  • Mirai pink wrap
  • Mirai teal wrap
  • Mirai brown wrap
  • Mirai gold wrap
  • Mirai chrome wrap
  • Mirai color shift wrap
  • Mirai carbon fiber wrap
  • Mirai camo and patterned wrap

How much vinyl to wrap a Toyota Mirai

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowsedan (4 doors)195.9 in (4,975 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2014–2020sedan (4 doors)192.5 in (4,890 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Mirai wrap cost factors

Mirai wrap cost depends on the size of the car and the film you choose. A full color change wrap on the second generation takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The first generation takes about 59 ft (18 m) because it is 192.5 in (4,890 mm) long. The amount of disassembly, such as removing mirror caps, also affects the final cost.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Mirai wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Mirai, second generation, factory photo
Factory color shown

2020–now Mirai sedan (second generation)

2020–nowsedan (4 doors)195.9 in (4,975 mm)

The second generation Toyota Mirai is a mid-size sedan from 2020 onward. Its length of 195.9 in (4,975 mm) means a full wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The four-door body has a standard number of panels: roof, hood, trunk, and doors. Wrapping the charge port door as a small piece is only needed on the first generation.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Toyota Mirai, first generation, factory photo
Factory color shown

2014–2020 Mirai sedan (first generation)

2014–2020sedan (4 doors)192.5 in (4,890 mm)

The first generation Toyota Mirai is a mid-size sedan sold from 2014 to 2020. Its length of 192.5 in (4,890 mm) means a full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. It has the same four-door sedan layout as the newer model. The charge port door is wrapped as a small piece of its own on this generation.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Mirai

A Mirai chrome delete covers the window trim and badges with black film. A partial wrap on the roof, hood, or mirror caps is a smaller job than a full color change. Paint protection film (PPF) is clear film applied to the front end. These options let you protect or restyle specific areas without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Mirai: body, cut-outs and film

A Toyota Mirai vinyl wrap on this mid-size sedan uses the film estimate based on the body length. The second generation measures 195.9 in (4,975 mm) and takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The first generation is shorter at 192.5 in (4,890 mm) and needs about 59 ft (18 m). The four-door sedan body means the roof, hood, trunk, and all four doors are wrapped as separate panels.

Mirai wrap ideas should account for the few parts that need extra work. The charge port door on the first generation is wrapped as a small piece of its own. Door handles and mirrors typically come off for a clean install. The window trim and badges are cut out or removed and wrapped separately.

Knowing how much vinyl to wrap a Mirai means checking the generation before you order. The first generation needs about 59 ft (18 m) of 60-inch (1.52 m) cast film. The second generation needs about 61 ft (18.5 m) of the same width. A chrome or patterned film adds roughly 10 ft (3 m) to either estimate.

Questions about wrapping a Toyota Mirai

How much vinyl does it take to wrap a Toyota Mirai?

A full wrap of a Toyota Mirai takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for the second generation. The first generation takes about 59 ft (18 m) because it is slightly shorter. This estimate covers the entire painted body with no extra for chrome or patterned film.

Can I wrap only the hood or the roof of a Mirai?

Yes, you can wrap only the hood or the roof of a Mirai. A partial wrap can be done on the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges. Paint protection film is another option for just the front end.

Is a Mirai hard to wrap?

A Mirai is not particularly hard to wrap, but the charge port door adds one extra piece on the first generation. The body is a standard mid-size sedan with no complex curves. The main work is removing the mirror caps and door handles for a clean install. The size means you use about 59–61 ft (18–18.5 m) of film.

How many generations of the Mirai does this page cover?

This page covers two generations of the Toyota Mirai. The first generation is from 2014 to 2020. The second generation is from 2020 onward. Each generation has its own film estimate.