Wraps by car

Toyota Pixis Joy wrap

This page covers the Toyota Pixis Joy wrap for the single generation built from 2016 onward. The car is a five-door mini hatchback, 133.7 in (3,395 mm) long. A full vinyl wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Toyota Pixis Joy, first generation, factory photo
Toyota Pixis Joy, first generation. Factory color shown.

Toyota Pixis Joy wrap colors and ideas

  • Pixis Joy black wrap
  • Pixis Joy white wrap
  • Pixis Joy gray wrap
  • Pixis Joy silver wrap
  • Pixis Joy red wrap
  • Pixis Joy blue wrap
  • Pixis Joy green wrap
  • Pixis Joy yellow wrap
  • Pixis Joy orange wrap
  • Pixis Joy purple wrap
  • Pixis Joy pink wrap
  • Pixis Joy teal wrap
  • Pixis Joy brown wrap
  • Pixis Joy gold wrap
  • Pixis Joy chrome wrap
  • Pixis Joy color shift wrap
  • Pixis Joy carbon fiber wrap
  • Pixis Joy camo and patterned wrap

How much vinyl to wrap a Toyota Pixis Joy

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowhatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Pixis Joy wrap cost factors

Pixis Joy wrap cost depends on the film quality, the number of panels and the amount of disassembly. The car measures 133.7 in (3,395 mm) long and has 11 major exterior panels, including the five doors. A chrome delete adds work on the window trim and badges, while paint protection film on the front end uses a separate clear film. Installers quote by the square meter of film used plus the hours for cut-outs and reassembly.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Pixis Joy wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Pixis Joy, first generation, factory photo
Factory color shown

2016–now Pixis Joy hatchback (first generation)

2016–nowhatchback (5 doors)133.7 in (3,395 mm)

The first generation Toyota Pixis Joy, produced from 2016 to now, is a five-door hatchback with a short 133.7 in (3,395 mm) body. The vertical tailgate and tall roof make the rear and top panels easy to wrap in single pieces. The small size means fewer square meters of film and fewer seams than a longer car. The five doors require separate trim around each handle and window, which adds labor time.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Pixis Joy

Partial wrap options for the Pixis Joy include the roof, hood and mirror caps in a contrasting film. A chrome delete covers the window trim and badges with black film for a muted look. Paint protection film (PPF) is a clear layer applied to the front bumper, hood and fenders to guard against stone chips. These smaller jobs use less film than a full wrap and can be done without removing the tailgate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Pixis Joy: body, cut-outs and film

A Toyota Pixis Joy vinyl wrap suits the compact hatchback shape, with its five doors and upright rear. The short overall length keeps panel sizes small and the film amount modest. The five-door layout adds four door cut lines but no complex body contours. The tailgate glass extends almost to the bumper, which reduces the vinyl area on the rear panel.

Pixis Joy wrap ideas start with handling the tailgate, where the rear glass sits inside the panel. The film must end at the edge of the glass, so the installer trims around it neatly. Door handles, mirror caps and the roof antenna need cut-outs or removal for a clean finish. The front and rear bumpers come off for edge wrapping, and the badges are removed before reapplication.

How much vinyl to wrap a Pixis Joy depends on the film type and trim level. The base calculation is about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for a full color change. If you choose chrome or patterned film, the pattern repeat raises the figure to about 52 ft (16 m). Since the car has one generation in the catalog, the film total stays the same across all years.

Questions about wrapping a Toyota Pixis Joy

How much vinyl does it take to wrap a Toyota Pixis Joy?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a Toyota Pixis Joy. If you use chrome or patterned film, the estimate rises to about 52 ft (16 m) because of pattern matching. The figure applies to the hatchback body of the newest generation.

Can I wrap only the hood or the roof of a Pixis Joy?

Yes, you can wrap only the hood or the roof of a Pixis Joy. The roof is a single flat panel that takes about 4 ft (1.2 m) of film, while the hood takes slightly less. Mirror caps and window trim are other common partial wrap areas.

Is a Pixis Joy hard to wrap?

A Pixis Joy is moderately easy to wrap because of its small, flat panels. The main challenge is the tailgate, where the film must end at the edge of the glass. The short length and five doors add cut-outs but no difficult curves.

How many generations of the Pixis Joy does this page cover?

This page covers one generation of the Pixis Joy, built from 2016 to the present. All body styles in the catalog are hatchbacks with five doors, and the wrap estimates are for this generation.