Wraps by car

Toyota bZ3X wrap

The Toyota bZ3X wrap page covers the first generation of the electric SUV, produced from 2024 onward. A full wrap of this body takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl film. If you choose chrome or patterned vinyl, plan for about 69 ft (21 m).

1generations19 mof film for a full wrap

Toyota bZ3X, first generation, factory photo
Toyota bZ3X, first generation. Factory color shown.

Toyota bZ3X wrap colors and ideas

  • Toyota bZ3X black wrap
  • Toyota bZ3X white wrap
  • Toyota bZ3X gray wrap
  • Toyota bZ3X silver wrap
  • Toyota bZ3X red wrap
  • Toyota bZ3X blue wrap
  • Toyota bZ3X green wrap
  • Toyota bZ3X yellow wrap
  • Toyota bZ3X orange wrap
  • Toyota bZ3X purple wrap
  • Toyota bZ3X pink wrap
  • Toyota bZ3X teal wrap
  • Toyota bZ3X brown wrap
  • Toyota bZ3X gold wrap
  • Toyota bZ3X chrome wrap
  • Toyota bZ3X color shift wrap
  • Toyota bZ3X carbon fiber wrap
  • Toyota bZ3X camo and patterned wrap

How much vinyl to wrap a Toyota bZ3X

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)181.1 in (4,600 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Toyota bZ3X wrap cost factors

The cost of a Toyota bZ3X wrap depends on the film area and the number of cut-outs. A full wrap needs about 62 ft (19 m) of 60-inch cast vinyl, or about 69 ft (21 m) for patterned film. The tailgate with the rear glass and the charge port door add trimming time, which also affects the final cost.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Toyota bZ3X wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota bZ3X, first generation, factory photo
Factory color shown

2024–now Toyota bZ3X SUV (first generation)

2024–nowSUV (5 doors)181.1 in (4,600 mm)

The first generation Toyota bZ3X is a 5-door SUV measuring 181.1 in (4,600 mm) in length. Its size means you will wrap large side panels and a tall tailgate, which uses more film than a small hatchback. The tailgate includes the rear glass, so the film must be trimmed to the glass edge rather than wrapped around it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Toyota bZ3X

A partial wrap on the Toyota bZ3X can cover the roof, hood, or mirror caps without wrapping the whole body. For a chrome delete, the window trim and badges are covered with black film to change the bright finish. Paint protection film (PPF) is a clear option applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota bZ3X: body, cut-outs and film

The Toyota bZ3X vinyl wrap covers an SUV body that is 181.1 in (4,600 mm) long with five doors. The large flat side panels are straightforward, but the tailgate and bumpers add curves that need careful stretching and relief cuts. For a full wrap, the film estimate works out to about 62 ft (19 m) of 60-inch material.

Toyota bZ3X wrap ideas start with the tailgate, where the rear glass is part of the panel. The film must end cleanly at the edge of the glass, so the tailgate is wrapped in sections. As an electric car, it also has a charge port door that is best wrapped as a separate small piece for a neat finish.

To work out how much vinyl to wrap a Toyota bZ3X, you need to know that only one generation is in the catalog. The 2024–now body takes about 62 ft (19 m) of 60-inch cast film for a full wrap. Patterned or chrome film requires extra material, about 69 ft (21 m), because you must match the pattern direction.

Questions about wrapping a Toyota bZ3X

How much vinyl does it take to wrap a Toyota bZ3X?

A full wrap of the Toyota bZ3X takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl film. If the wrap uses chrome or patterned film, allow about 69 ft (21 m) to match the pattern. These figures are for the first generation body, which is the only generation currently in the catalog.

Can I wrap only the hood or the roof of a Toyota bZ3X?

Yes, you can wrap only the hood or the roof of a Toyota bZ3X. A partial wrap commonly includes the roof, hood, or mirror caps as individual pieces. This approach changes the look without covering the entire body and uses less film than a full wrap.

Is a Toyota bZ3X hard to wrap?

The Toyota bZ3X is not hard to wrap, but it has details that add work. The tailgate has the rear glass built in, so the film must be cut to the glass edge rather than wrapped around. The charge port door is another small panel that needs a separate piece of film.

How many generations of the Toyota bZ3X does this page cover?

This page covers one generation of the Toyota bZ3X, the first generation produced from 2024 onward. No other generations are currently listed in the catalog. All wrap information on this page refers to that single body style.