A color change wrap on a Corolla Rumion starts with picking the finish of color shift film that matches the look you want. Gloss color shift film gives the deepest color travel, while satin and matte finishes tone down the reflection but keep the shift. The Corolla Rumion wrapped in color shift film should use a cast film so it can be stretched into the tailgate recess and around the rear glass edge. For this wagon body, a finish with a stronger contrast makes the shift easier to see on the large slab sides.
The factory paint on a Corolla Rumion needs careful inspection before wrapping, because the car is from 2007–2015 and may have areas of repaint. Any loose or peeling paint must be fixed first, since film will not bond to it and will pull it off when removed. Seams are placed at body lines or panel edges, and on the Corolla Rumion the main seam runs along the roof edge and around the tailgate. The tailgate glass is wrapped up to its edge, so the film ends cleanly at the glass without a visible line.
A color shift wrap on the Corolla Rumion is removable without leaving adhesive on the paint when removed correctly. The film is designed to peel off the factory finish, but the paint must be in good condition before installation. Hand washing the wrapped Corolla Rumion is the best way to keep the color shift film clean and avoid lifting edges. Avoid automatic car washes with brushes, and do not pressure wash near film edges or the tailgate glass seal.

