Matte black Venza finishes include KPMF Black Matt VWS Airelease liner K89021 and Platinum Wrapping Film Matt Obsidian Black 2.0 CC 4157, both in matte. Super matte films add a flatter, low-sheen look that hides fingerprints and small surface marks.
Gloss black Venza films like KPMF Black Gloss VWS Airelease liner K88021 and ORAFOL Black 070 G give a deep, reflective shine. High gloss films take that shine further, with a wet-look finish that stands out on large panels.
Black metallic Venza options such as VViViD ULTRA-MATTE Metallic Black and Tinybot Metal Paint Black 3017 add fine metal flake for depth. Pearl finishes also appear in the group, shifting subtly under light and adding warmth to black.
Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.
Years
Body
Length
Film to order
2020–now
SUV (5 doors)
186.6 in (4,740 mm)
about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2008–2016
SUV (5 doors)
189.0 in (4,801 mm) to 190.3 in (4,833 mm)
about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
Black Venza wraps by generation
Swipe sideways. Tap a card for the full description.
Factory color shown
2020–now Venza (second generation): satin black
2020–nowSUV (5 doors)186.6 in (4,740 mm)
A wrapped Venza measures 186.6 in (4,740 mm) long, using about 62 ft (19 m) of 60-inch (1.52 m) cast film for full coverage. The SUV's five doors and tailgate create multiple panels, and each panel is wrapped separately to keep seams clean.
Satin black on this body gives a soft sheen that falls between matte and gloss, and it suits the Toyota Venza's curves well. The vinyl wrap reflects less light than full gloss, so panel contours stay readable without looking flat.
Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
Factory color shown
2008–2016 Venza (first generation): matte black
2008–2016SUV (5 doors)189.0 in (4,801 mm) to 190.3 in (4,833 mm)
A Venza wrapped matte black from 2008–2016 sits on a body that may have original or repainted panels. A test spot on each panel checks adhesion before the full wrap, especially on a tailgate where the film ends at the glass edge.
Matte black on this body makes a strong wrap design for the first generation Toyota Venza, which has a panoramic glass roof on every trim. The roof film is cut around the glass and roof rails, and the sunroof opening is trimmed neatly.
Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
Partial black wrap, chrome delete and PPF on a Venza
Black partial wrap for the Venza
A partial wrap in black on the Venza covers the roof, hood, or mirror caps, using about 4.5 m (15 ft) of film for a roof panel. This targets high-impact areas without wrapping the full body, and mirror caps take little film but change the front view.
Venza chrome delete
A chrome delete on the Venza uses gloss or satin black film over the window trim and badges next to a black body. The bright trim is covered with black film, so the blackout look is consistent across the car's side profile.
Paint protection film on a Venza
Paint protection film (PPF) is a clear film applied to the front end of the Toyota Venza to guard against stone chips and road debris. A matte PPF exists and can be placed over a wrap without changing its finish.
Wrapping a Toyota Venza in black: film, fit and upkeep
A Venza wrapped in black is a full color change that covers the painted body panels with vinyl film.
Factory paint stays hidden under the film, and seams are placed at panel edges where they are least visible.
The wrap is removable, and hand washing keeps the film clean without lifting the edges.
How much does it cost to wrap a Toyota Venza in black?
The cost to wrap a Toyota Venza in black depends on the film amount, film line, finish, labor, paint preparation, and door jambs. A larger film area and special finishes raise the amount of film needed, and paint correction before wrapping adds to the labor.
Can a leased Venza be wrapped?
Yes, a leased Venza can be wrapped, provided the wrap is removed before the lease return. The film can be taken off without painting, and the original paint is left in its pre-wrap condition.
Will removing a black wrap damage the factory paint?
No, removing a black wrap does not damage factory paint when the film is removed with proper care and the paint was in good condition. The adhesive is designed to release from the clearcoat without pulling it away.
How do I choose a wrap shop for the Venza?
Choose a wrap shop for the Venza by looking at examples of their work on SUVs and asking about their film choices and handling of body lines. Confirm that they wrap door jambs and edges cleanly, and ask to see a finished vehicle in person.
Does a black wrap show dirt, heat or fading more than other colors?
A black wrap shows dust and water spots more than lighter colors, and its surface gets warmer in direct sun. Dirt is most visible on matte and satin finishes, while gloss black shows swirls from washing.