Wraps by car

VinFast VF7 wrap

This page covers the VinFast VF7 wrap in vinyl wrap film. The VinFast VF7 is the compact electric SUV made by VinFast. It has one generation in the catalog, produced from 2022 to now. A full wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

VinFast VF7, first generation, factory photo
VinFast VF7, first generation. Factory color shown.

VinFast VF7 wrap colors and ideas

  • VinFast VF7 black wrap
  • VinFast VF7 white wrap
  • VinFast VF7 gray wrap
  • VinFast VF7 silver wrap
  • VinFast VF7 red wrap
  • VinFast VF7 blue wrap
  • VinFast VF7 green wrap
  • VinFast VF7 yellow wrap
  • VinFast VF7 orange wrap
  • VinFast VF7 purple wrap
  • VinFast VF7 pink wrap
  • VinFast VF7 teal wrap
  • VinFast VF7 brown wrap
  • VinFast VF7 gold wrap
  • VinFast VF7 chrome wrap
  • VinFast VF7 color shift wrap
  • VinFast VF7 carbon fiber wrap
  • VinFast VF7 camo and patterned wrap

How much vinyl to wrap a VinFast VF7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)178.9 in (4,545 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

VinFast VF7 wrap cost factors

The VinFast VF7 wrap cost depends on the amount of film and the labor for this car. A full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) film, and chrome or patterned film needs about 69 ft (21 m). The size of the SUV, 178.9 in (4,545 mm) long, affects the material needed. Complexity like the tailgate with rear glass and the charge port door adds labor time.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

VinFast VF7 wraps by generation

Swipe sideways. Tap a card for the full description.

VinFast VF7, first generation, factory photo
Factory color shown

2022–now VinFast VF7 SUV (first generation)

2022–nowSUV (5 doors)178.9 in (4,545 mm)

The first generation of the VinFast VF7 is an SUV with five doors. Its length of 178.9 in (4,545 mm) means the wrap is split into manageable panels. The hood, roof, doors and tailgate each take one or two pieces of film. The tailgate glass is not covered, so the film ends at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a VinFast VF7

Partial wrap options for the VinFast VF7 include the roof, hood and mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a VinFast VF7: body, cut-outs and film

A VinFast VF7 vinyl wrap covers a five-door SUV body that is 178.9 in (4,545 mm) long. The size means a full wrap uses more film than a small hatchback but less than a large van. The panel count is typical for an SUV, with doors, fenders, hood, roof and tailgate as separate pieces. The straight body sides and simple curves keep the installation straightforward.

VinFast VF7 wrap ideas start with the areas that need cut-outs or come off. The tailgate has the rear glass in it, so the film ends at the edge of the glass. As an electric car, the charge port door is wrapped as a small piece of its own. Door handles, badges and trim are removed or cut around for a clean finish.

When you figure out how much vinyl to wrap a VinFast VF7, the generation matters. This page covers only the first generation, made from 2022 to now. The body style has been consistent, so the film estimate stays about the same. If a second generation arrives, the amount of film could change.

Questions about wrapping a VinFast VF7

How much vinyl does it take to wrap a VinFast VF7?

A full wrap of a VinFast VF7 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. This estimate is for the newest body, which is the first generation from 2022 to now. Chrome or patterned film requires about 69 ft (21 m). The exact amount can vary with waste and panel layout.

Can I wrap only the hood or the roof of a VinFast VF7?

Yes, you can wrap only the hood or the roof of a VinFast VF7. The partial wrap options for this car include the roof, hood and mirror caps. These are common smaller jobs that use less film than a full wrap. A hood wrap protects the leading edge and changes the look without covering the whole car.

Is a VinFast VF7 hard to wrap?

The VinFast VF7 is not especially hard to wrap, but a few parts add work. The tailgate has the rear glass in it, so the film must end at the edge of the glass. The charge port door is wrapped as a small piece of its own, which takes extra time. The SUV size of 178.9 in (4,545 mm) means more panels than a small car.

How many generations of the VinFast VF7 does this page cover?

This page covers one generation of the VinFast VF7. The first generation has been produced from 2022 to now. There is only one body style, a five-door SUV. The film estimate is based on this single generation.