Wraps by car

VinFast VF9 wrap

The VinFast VF9 wrap page covers the electric VinFast VF9 SUV, produced since 2022 in one generation. A full wrap of the newest body takes about 69 ft (21 m) of 60-inch (1.52 m) cast film, or about 79 ft (24 m) for chrome or patterned vinyl wrap.

1generations21 mof film for a full wrap

VinFast VF9, first generation, factory photo
VinFast VF9, first generation. Factory color shown.

VinFast VF9 wrap colors and ideas

  • VinFast VF9 black wrap
  • VinFast VF9 white wrap
  • VinFast VF9 gray wrap
  • VinFast VF9 silver wrap
  • VinFast VF9 red wrap
  • VinFast VF9 blue wrap
  • VinFast VF9 green wrap
  • VinFast VF9 yellow wrap
  • VinFast VF9 orange wrap
  • VinFast VF9 purple wrap
  • VinFast VF9 pink wrap
  • VinFast VF9 teal wrap
  • VinFast VF9 brown wrap
  • VinFast VF9 gold wrap
  • VinFast VF9 chrome wrap
  • VinFast VF9 color shift wrap
  • VinFast VF9 carbon fiber wrap
  • VinFast VF9 camo and patterned wrap

How much vinyl to wrap a VinFast VF9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)201.5 in (5,118 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

VinFast VF9 wrap cost factors

The VinFast VF9 wrap cost depends on the size of the vehicle, the type of film, and the complexity of the install. A full wrap of this 201.5 in (5,118 mm) SUV needs about 69 ft (21 m) of cast film, while chrome or patterned film requires about 79 ft (24 m). More intricate work like wrapping the charge port door separately or removing trim adds labor time but not material.

  • Film for a full wrap: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

VinFast VF9 wraps by generation

Swipe sideways. Tap a card for the full description.

VinFast VF9, first generation, factory photo
Factory color shown

2022–now VinFast VF9 SUV (first generation)

2022–nowSUV (5 doors)201.5 in (5,118 mm)

The first generation VinFast VF9 is a five-door SUV with a length of 201.5 in (5,118 mm), which means a full wrap uses about 69 ft (21 m) of standard film. Its large panels and tall roofline add surface area, so installers often work in sections to keep the vinyl manageable. The number of panels is higher than a small car, with separate pieces for each door, fender, hood, roof, and the tailgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a VinFast VF9

On a VinFast VF9, a partial wrap can cover just the roof, hood, or mirror caps to change the look without a full color change. A chrome delete on the window trim and badges is another smaller VinFast VF9 chrome delete job that uses black film to cover bright trim. For protection without changing the look, paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a VinFast VF9: body, cut-outs and film

The VinFast VF9 vinyl wrap job starts with a large five-door SUV body, 201.5 in (5,118 mm) long, which means more film and more panels than a smaller car. The tall sides and long roof add surface area, so a full wrap uses about 69 ft (21 m) of standard film. Installers cut the film into sections for the doors, fenders, hood, roof, and tailgate, and each panel needs careful alignment.

When planning VinFast VF9 wrap ideas, remember the tailgate includes the rear glass, so the film ends at the edge of the glass instead of wrapping over it. As an electric car, the VF9 has a charge port door that is best wrapped as a small separate piece, then reinstalled. Door handles, mirror caps, and trim often come off for cleaner edges, and these cut-outs add time but give a factory look.

Anyone counting how much vinyl to wrap a VinFast VF9 should know that only one generation exists, so film amounts stay the same across all production years from 2022 onward. The body dimensions and panel layout have not changed, so a full wrap estimate of about 69 ft (21 m) applies to every VF9. For chrome or patterned film, plan on about 79 ft (24 m) because of extra material needed for matching patterns.

Questions about wrapping a VinFast VF9

How much vinyl does it take to wrap a VinFast VF9?

A full wrap of a VinFast VF9 takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the amount goes up to about 79 ft (24 m) because the pattern must be matched across panels.

Can I wrap only the hood or the roof of a VinFast VF9?

Yes, you can wrap only the hood or the roof of a VinFast VF9, since partial wrap options include the roof, hood, and mirror caps. A hood wrap is a common way to add contrast without covering the whole SUV.

Is a VinFast VF9 hard to wrap?

The VinFast VF9 is moderately hard to wrap because of its large size and a few specific details. The tailgate has the rear glass in it, so the film must end cleanly at the glass edge, and the charge port door is wrapped as a small piece of its own. Careful panel alignment and extra material for the 201.5 in (5,118 mm) body add time compared with a smaller car.

How many generations of the VinFast VF9 does this page cover?

This page covers one generation of the VinFast VF9, produced from 2022 to now. All VF9 models share the same body style and dimensions, so wrap instructions apply to every year.