A VinFast VF7 wrapped in green is a full color change that covers the painted body with cast vinyl film. The wrap ends at the edge of the tailgate glass because the rear glass is part of the tailgate. You choose the finish first, then the film, and finally decide between a full wrap or a partial wrap. An electric car's charge port door is wrapped as a small piece of its own.

The factory paint under a green wrap stays untouched, and the film can be removed later. Seams on the VF7 run along the hood edges, the A-pillars and the tailgate opening because the body has no sharp body lines to hide them. The tailgate seam follows the edge of the rear glass, where the film naturally ends. Film installers use knifeless tape on the charge port door so the cut line stays hidden.

A green color change wrap is removable because the adhesive is designed to release from factory paint. Hand wash the wrapped VF7 with a mild soap and a soft mitt, and avoid pressure washers aimed at film edges. The charge port door is cleaned with the same care as the rest of the car. The tailgate glass edge is a place to check after washing because water can lift the film if it sits there.