Wraps by car

Volvo 140 Series wrap

The Volvo 140 Series wrap guide covers the single generation made from 1966 to 1975. A full vinyl wrap of the newest sedan body needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The wagon is close behind at about 56 ft (17 m).

1generations17 mof film for a full wrap

Volvo 140 Series, first generation, factory photo
Volvo 140 Series, first generation. Factory color shown.

Volvo 140 Series wrap colors and ideas

  • Volvo 140 Series black wrap
  • Volvo 140 Series white wrap
  • Volvo 140 Series gray wrap
  • Volvo 140 Series silver wrap
  • Volvo 140 Series red wrap
  • Volvo 140 Series blue wrap
  • Volvo 140 Series green wrap
  • Volvo 140 Series yellow wrap
  • Volvo 140 Series orange wrap
  • Volvo 140 Series purple wrap
  • Volvo 140 Series pink wrap
  • Volvo 140 Series teal wrap
  • Volvo 140 Series brown wrap
  • Volvo 140 Series gold wrap
  • Volvo 140 Series chrome wrap
  • Volvo 140 Series color shift wrap
  • Volvo 140 Series carbon fiber wrap
  • Volvo 140 Series camo and patterned wrap

How much vinyl to wrap a Volvo 140 Series

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1966–1975sedan, wagon (2 or 4 or 5 doors)182.7 in (4,640 mm) to 183.1 in (4,651 mm)about 56 ft (17 m) for the wagon to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Volvo 140 Series wrap cost factors

Volvo 140 Series wrap cost depends on the film amount, the body style, and how much disassembly the car needs. The sedan and wagon are nearly the same length, so the difference in film is small. The wagon tailgate with its rear glass adds an edge to finish, which affects labor. The condition of the paint and trim also changes the preparation time.

  • Film for a full wrap: about 56 ft (17 m) for the wagon to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Volvo 140 Series wraps by generation

Swipe sideways. Tap a card for the full description.

Volvo 140 Series, first generation, factory photo
Factory color shown

1966–1975 Volvo 140 Series sedan, wagon (first generation)

1966–1975sedan, wagon (2 or 4 or 5 doors)182.7 in (4,640 mm) to 183.1 in (4,651 mm)

The first generation Volvo 140 Series ran from 1966 to 1975 as a sedan and a wagon, and the style decides the panel plan. The wagon has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The sedan has a conventional trunk lid and a more straightforward rear panel layout.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the wagon to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Volvo 140 Series

Smaller jobs on a Volvo 140 Series include a partial wrap of the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volvo 140 Series: body, cut-outs and film

The Volvo 140 Series came as a sedan and a wagon with two, four, or five doors, and the body style sets the film plan. The sedan and wagon are both mid-size at 182.7 in (4,640 mm) to 183.1 in (4,651 mm) long, so a full wrap uses nearly the same amount of film. A vinyl wrap on this car means working with long flat sides and a roof that is easy to reach. The wagon tailgate changes the layout because the rear glass sits inside it.

Volvo 140 Series wrap ideas start with the tailgate on the wagon, because the film must end at the edge of the rear glass. The door handles, badges, and side trim need cut-outs for a clean install. On some cars the front grille and bumpers can be left in place if the wrap does not cover them.

How much vinyl to wrap a Volvo 140 Series depends on the body style, since the two styles use different panel counts. The wagon takes about 56 ft (17 m) and the sedan about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Adding chrome or patterned film can raise the total to about 66 ft (20 m).

Questions about wrapping a Volvo 140 Series

How much vinyl does it take to wrap a Volvo 140 Series?

Yes, a full wrap of a Volvo 140 Series takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for the sedan. The wagon needs about 56 ft (17 m) with the same film width.

Which Volvo 140 Series body takes more film?

The Volvo 140 Series sedan takes more film than the wagon. The sedan uses about 57 ft (17.5 m) and the wagon about 56 ft (17 m) of 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Volvo 140 Series?

Yes, you can wrap only the hood or the roof of a Volvo 140 Series. A partial wrap of the hood, roof, or mirror caps is a smaller job than a full wrap.

Is a Volvo 140 Series hard to wrap?

A Volvo 140 Series is not the hardest car to wrap, but the wagon tailgate adds work because the film ends at the edge of the rear glass. The long flat sides and roof are straightforward, but the trim and badges require careful cut-outs.