Wraps by car

Volvo XC70 wrap

The Volvo XC70 wrap page covers the two generations produced from 2000 to 2016. A full vinyl wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. The second-generation car from 2007 to 2016 is 190.5 in (4,838 mm) long.

2generations20.5 mof film for a full wrap

Volvo XC70, second generation, factory photo
Volvo XC70, second generation. Factory color shown.

Volvo XC70 wrap colors and ideas

  • Volvo XC70 black wrap
  • Volvo XC70 white wrap
  • Volvo XC70 gray wrap
  • Volvo XC70 silver wrap
  • Volvo XC70 red wrap
  • Volvo XC70 blue wrap
  • Volvo XC70 green wrap
  • Volvo XC70 yellow wrap
  • Volvo XC70 orange wrap
  • Volvo XC70 purple wrap
  • Volvo XC70 pink wrap
  • Volvo XC70 teal wrap
  • Volvo XC70 brown wrap
  • Volvo XC70 gold wrap
  • Volvo XC70 chrome wrap
  • Volvo XC70 color shift wrap
  • Volvo XC70 carbon fiber wrap
  • Volvo XC70 camo and patterned wrap

How much vinyl to wrap a Volvo XC70

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2016wagon (5 doors)190.5 in (4,838 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
2000–2007wagon (5 doors)186.3 in (4,733 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Volvo XC70 wrap cost factors

A Volvo XC70 wrap cost depends on film area, film type, and body details. The car is 190.5 in (4,838 mm) long in the second generation and 186.3 in (4,733 mm) in the first. Chrome or patterned film needs about 76 ft (23 m) on the newer car and 74 ft (22.5 m) on the older one. Additional work like removing roof rails or cutting around parking sensors also affects the final cost.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2013: bumpers and lights differ between the versions, and so do the film cuts.

Volvo XC70 wraps by generation

Swipe sideways. Tap a card for the full description.

Volvo XC70, second generation, factory photo
Factory color shown

2007–2016 Volvo XC70 wagon (second generation)

2007–2016wagon (5 doors)190.5 in (4,838 mm)

The second-generation Volvo XC70 received a restyling in 2013. Bumpers and lights changed, so film cut for one version does not fit the other. A wrapper must know the production year to order the right pattern for those parts.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Volvo XC70, first generation, factory photo
Factory color shown

2000–2007 Volvo XC70 wagon (first generation)

2000–2007wagon (5 doors)186.3 in (4,733 mm)

The first-generation Volvo XC70 was built from 2000 to 2007 and restyled in 2004. Paint age varies on a car of these years because panels may be original or repainted. A test spot comes before a full wrap to check how the film adheres to the paint surface.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Volvo XC70

A partial wrap on a Volvo XC70 can cover the roof, hood, or mirror caps. A chrome delete covers window trim, decorative moldings, and badges with black film. Paint protection film (PPF) is clear film applied to the front end to shield it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Volvo XC70: body, cut-outs and film

A Volvo XC70 vinyl wrap is applied to a mid-size five-door wagon. The second-generation body measures 190.5 in (4,838 mm) and the first generation 186.3 in (4,733 mm). These dimensions set the film area and the time for panel layout. Both generations share the same basic shape with a tailgate that includes the rear glass.

Volvo XC70 wrap ideas must account for the factory details on some trims. Roof rails come off before the roof is wrapped or the film is cut along them. Bright decorative moldings stay bright next to the film unless a chrome delete covers them. Parking sensors in the bumpers need the film cut around each sensor, and fog lamps always get cut-outs in the bumper film.

How much vinyl to wrap a Volvo XC70 changes between the generations. The second generation needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a standard wrap. The first generation takes about 66 ft (20 m) of the same size film. Using chrome or patterned film adds about 9 ft (2.5 m) to each estimate.

Questions about wrapping a Volvo XC70

How much vinyl does it take to wrap a Volvo XC70?

A Volvo XC70 from 2007–2016 takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. The first generation from 2000–2007 needs about 66 ft (20 m) of the same width.

Which years of the Volvo XC70 take the same film cuts?

The Volvo XC70 film cuts group into 2007–2012 and 2013–2016 for the second generation. The first generation splits into 2000–2003 and 2004–2007 after its restyling. Within each of these periods the panels share the same cut shapes.

Can I wrap only the hood or the roof of a Volvo XC70?

Yes, you can wrap only the hood or the roof of a Volvo XC70. A partial wrap of the roof, hood, or mirror caps is a standard job. A chrome delete covers window trim, decorative moldings, and badges separately.

Is a Volvo XC70 hard to wrap?

A Volvo XC70 is moderately hard to wrap because of its size and details. The newest body is 190.5 in (4,838 mm) long and has a tailgate with the rear glass in it. Some trims have roof rails, parking sensors, or bright moldings that add cutting or removal steps. Fog lamps in the front bumper always require cut-outs in the bumper film.