Wraps by car

Volvo V50 wrap

This page covers the Volvo V50 wrap, a mid-size wagon produced in one generation from 2003 to 2012. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan about 70 ft (21.5 m). The guide below explains the body, the film cuts, the partial jobs, and the cost factors.

1generations16.5 mof film for a full wrap

Volvo V50, first generation, factory photo
Volvo V50, first generation. Factory color shown.

Volvo V50 wrap colors and ideas

  • Volvo V50 black wrap
  • Volvo V50 white wrap
  • Volvo V50 gray wrap
  • Volvo V50 silver wrap
  • Volvo V50 red wrap
  • Volvo V50 blue wrap
  • Volvo V50 green wrap
  • Volvo V50 yellow wrap
  • Volvo V50 orange wrap
  • Volvo V50 purple wrap
  • Volvo V50 pink wrap
  • Volvo V50 teal wrap
  • Volvo V50 brown wrap
  • Volvo V50 gold wrap
  • Volvo V50 chrome wrap
  • Volvo V50 color shift wrap
  • Volvo V50 carbon fiber wrap
  • Volvo V50 camo and patterned wrap

How much vinyl to wrap a Volvo V50

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2012wagon (5 doors)177.7 in (4,514 mm) to 178.0 in (4,522 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Volvo V50 wrap cost factors

Volvo V50 wrap cost depends on the size of the car, the film type, and the labor for its specific parts. The body is 177.7 to 178.0 inches long, so it uses about 54 ft of cast film for a color change. Chrome or patterned film adds about 70 ft, which raises the material amount. The tailgate glass and optional roof rails or fog lamps add cut-out and removal time, which also affects the final cost.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2007: bumpers and lights differ between the versions, and so do the film cuts.

Volvo V50 wraps by generation

Swipe sideways. Tap a card for the full description.

Volvo V50, first generation, factory photo
Factory color shown

2003–2012 Volvo V50 wagon (first generation)

2003–2012wagon (5 doors)177.7 in (4,514 mm) to 178.0 in (4,522 mm)

The first generation Volvo V50 was built from 2003 to 2012, with a restyling in 2007. That update changed the bumpers and lights, so film cut for one version does not fit the other. If you wrap a 2007 or later car, order patterns that match the updated front and rear. The body length stayed nearly the same, so the total film needed is unchanged.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Volvo V50

A partial wrap on a Volvo V50 can cover the roof, the hood, or the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These jobs use much less film than a full wrap and still change the look or protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Volvo V50: body, cut-outs and film

The Volvo V50 vinyl wrap covers one body style: a five-door wagon. Its length ranges from 177.7 in (4,514 mm) to 178.0 in (4,522 mm), so a standard roll width works well. The wagon shape means a large tailgate and roof area, which adds film compared with a small hatchback. You can wrap the whole car with one continuous roof piece because there is no separate trunk lid.

Good Volvo V50 wrap ideas start with the tailgate and its rear glass: the film ends at the edge of the glass. On some trims with roof rails, the rails come off before the roof is wrapped, or the film is cut along them. Some trims also have fog lamps in the front bumper, so the bumper film needs cut-outs for them. These details keep the wrap looking clean without trapped edges.

To know how much vinyl to wrap a Volvo V50, you need the film estimate of about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. There is only one generation, so the amount does not change by year. However, the restyling in 2007 changed the bumpers and lights, so a film kit cut for one version does not fit the other. Always check which bumper your car has before you buy a pre-cut kit.

Questions about wrapping a Volvo V50

How much vinyl does it take to wrap a Volvo V50?

Yes, a full wrap of a Volvo V50 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, plan about 70 ft (21.5 m). These figures cover the newest body style, which is the only generation. Always round up slightly to allow for mistakes or complex areas.

Which years of the Volvo V50 take the same film cuts?

The Volvo V50 was produced from 2003 to 2012, with a restyling in 2007. The same film cuts fit the versions before 2007 and the versions after 2007, but not across the restyling. The bumpers and lights changed, so a kit for a 2004 car will not match a 2008 car. Use patterns made for your specific bumper style.

Can I wrap only the hood or the roof of a Volvo V50?

Yes, you can wrap only the hood or the roof of a Volvo V50. Common partial jobs are the roof, hood, and mirror caps. A chrome delete on the window trim and badges is also smaller than a full wrap. These pieces can be done separately and are a practical way to change the look without a full color change.

Is a Volvo V50 hard to wrap?

A Volvo V50 is not especially hard to wrap, but a few details add work. The tailgate has the rear glass built in, so you must cut the film cleanly along its edge. Some trims have roof rails that need removal or careful cutting. Fog lamps on some bumpers require cut-outs, and the 2007 restyling means different bumper shapes to match.