Wraps by car

Volvo 240 Series wrap

The Volvo 240 Series wrap page covers the full-size sedan and wagon built from 1974 to 1993 as one cataloged generation. A full vinyl wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for the sedan. The wagon needs about 57 ft (17.5 m) of the same film width. A chrome or patterned film can raise the total to about 72 ft (22 m) for full coverage.

1generations16 mof film for a full wrap

Volvo 240 Series, first generation, factory photo
Volvo 240 Series, first generation. Factory color shown.

Volvo 240 Series wrap colors and ideas

  • Volvo 240 Series black wrap
  • Volvo 240 Series white wrap
  • Volvo 240 Series gray wrap
  • Volvo 240 Series silver wrap
  • Volvo 240 Series red wrap
  • Volvo 240 Series blue wrap
  • Volvo 240 Series green wrap
  • Volvo 240 Series yellow wrap
  • Volvo 240 Series orange wrap
  • Volvo 240 Series purple wrap
  • Volvo 240 Series pink wrap
  • Volvo 240 Series teal wrap
  • Volvo 240 Series brown wrap
  • Volvo 240 Series gold wrap
  • Volvo 240 Series chrome wrap
  • Volvo 240 Series color shift wrap
  • Volvo 240 Series carbon fiber wrap
  • Volvo 240 Series camo and patterned wrap

How much vinyl to wrap a Volvo 240 Series

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1993sedan, wagon (2 or 4 or 5 doors)188.6 in (4,790 mm) to 190.6 in (4,840 mm)about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Volvo 240 Series wrap cost factors

Volvo 240 Series wrap cost depends on the body style you wrap and the film type you choose. The wagon needs about 57 ft (17.5 m) of material, while the sedan needs about 52 ft (16 m), and more film means more labor. A chrome or patterned film can raise the material amount to about 72 ft (22 m). The long, flat sides and the tailgate glass on the wagon add separate cutting and finishing steps.

  • Film for a full wrap: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Volvo 240 Series wraps by generation

Swipe sideways. Tap a card for the full description.

Volvo 240 Series, first generation, factory photo
Factory color shown

1974–1993 Volvo 240 Series sedan, wagon (first generation)

1974–1993sedan, wagon (2 or 4 or 5 doors)188.6 in (4,790 mm) to 190.6 in (4,840 mm)

The first generation Volvo 240 Series came as a sedan and a wagon from 1974 to 1993. The body style decides the panel plan and the film amount for a wrap. The sedan needs roughly 52 ft (16 m), while the wagon needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Both styles share the same 188.6 in (4,790 mm) to 190.6 in (4,840 mm) overall length.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Volvo 240 Series

A partial wrap on a Volvo 240 Series covers the roof, hood, or mirror caps as separate jobs. A chrome delete on this car covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end on the Volvo 240 Series. These jobs leave the long side panels unwrapped, so they use much less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volvo 240 Series: body, cut-outs and film

A Volvo 240 Series vinyl wrap must suit the sedan and the wagon body styles of this car. The sedan is 188.6 in (4,790 mm) to 190.6 in (4,840 mm) long, while the wagon shares that footprint with a taller rear. The wagon tailgate adds one large vertical panel with the rear glass set into it. The film amount rises from about 52 ft (16 m) on the sedan to 57 ft (17.5 m) on the wagon because of that tailgate area.

Volvo 240 Series wrap ideas begin with the tailgate on the wagon body. The rear glass sits in the tailgate, so the film ends cleanly at the edge of the glass. Installers cut around the glass and tuck the film behind the rubber seal on that panel. The sedan trunk lid and the long roof need a two-person stretch to avoid wrinkles on this full-size body.

How much vinyl to wrap a Volvo 240 Series depends on the body style, not on the production year. The catalog lists one generation from 1974 to 1993, so the panel count does not change between early and late cars. The sedan uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the wagon uses about 57 ft (17.5 m). A chrome or patterned film can require up to about 72 ft (22 m) because the pattern repeat consumes extra material.

Questions about wrapping a Volvo 240 Series

How much vinyl does it take to wrap a Volvo 240 Series?

About 52 ft (16 m) to 57 ft (17.5 m) of 60-inch (1.52 m) vinyl wrap is needed for a full Volvo 240 Series. The sedan takes about 52 ft (16 m), while the wagon takes about 57 ft (17.5 m). A chrome or patterned film can require up to about 72 ft (22 m) because the pattern alignment consumes extra material.

Which Volvo 240 Series body takes more film?

The wagon takes more film than the sedan on a Volvo 240 Series. The wagon needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while the sedan needs about 52 ft (16 m). The wagon's tailgate adds a large panel that the sedan does not have. The rear glass in the tailgate still requires a cut-out, but the surrounding metal adds area.

Can I wrap only the hood or the roof of a Volvo 240 Series?

Yes, you can wrap only the hood or the roof of a Volvo 240 Series. A partial wrap covers the roof, hood, or mirror caps as separate jobs. The roof on this full-size car is long, so it needs two people to lay the film smoothly. A hood wrap is a smaller job that uses a single piece of film on the flat center section.

Is a Volvo 240 Series hard to wrap?

A Volvo 240 Series is not hard to wrap, but the wagon tailgate and the long body add work. The tailgate has the rear glass set into it, so the film must end cleanly at the edge of the glass. The sedan length of 188.6 in (4,790 mm) to 190.6 in (4,840 mm) means long side panels that need careful handling. The flat sides and simple curves make the 240 Series easier than a modern car with deep bumpers and many sensors.