Wraps by car

Volvo 300 Series wrap

The Volvo 300 Series wrap page covers the first-generation compact car produced from 1975 to 1991. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback using 60-inch cast film. Chrome or patterned film can require up to about 61 ft (18.5 m).

1generations14.5 mof film for a full wrap

Volvo 300 Series, first generation, factory photo
Volvo 300 Series, first generation. Factory color shown.

Volvo 300 Series wrap colors and ideas

  • Volvo 300 Series black wrap
  • Volvo 300 Series white wrap
  • Volvo 300 Series gray wrap
  • Volvo 300 Series silver wrap
  • Volvo 300 Series red wrap
  • Volvo 300 Series blue wrap
  • Volvo 300 Series green wrap
  • Volvo 300 Series yellow wrap
  • Volvo 300 Series orange wrap
  • Volvo 300 Series purple wrap
  • Volvo 300 Series pink wrap
  • Volvo 300 Series teal wrap
  • Volvo 300 Series brown wrap
  • Volvo 300 Series gold wrap
  • Volvo 300 Series chrome wrap
  • Volvo 300 Series color shift wrap
  • Volvo 300 Series carbon fiber wrap
  • Volvo 300 Series camo and patterned wrap

How much vinyl to wrap a Volvo 300 Series

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1991hatchback, sedan (3 or 4 or 5 doors)163.0 in (4,140 mm) to 169.3 in (4,300 mm)about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Volvo 300 Series wrap cost factors

The Volvo 300 Series wrap cost depends on the film brand and finish, the body style, and the labor in a compact car. A hatchback needs about 49 ft (15 m) of 60-inch cast film, while a sedan uses about 48 ft (14.5 m). Chrome or patterned film raises material use to about 61 ft (18.5 m). The tailgate glass on a hatchback must be cut around precisely, which adds time.

  • Film for a full wrap: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: hatchback, sedan (3 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Volvo 300 Series wraps by generation

Swipe sideways. Tap a card for the full description.

Volvo 300 Series, first generation, factory photo
Factory color shown

1975–1991 Volvo 300 Series hatchback, sedan (first generation)

1975–1991hatchback, sedan (3 or 4 or 5 doors)163.0 in (4,140 mm) to 169.3 in (4,300 mm)

The first generation of the Volvo 300 Series offers hatchback and sedan styles from 1975 to 1991. The style decides the panel plan and the film amount: the sedan needs about 48 ft (14.5 m), the hatchback about 49 ft (15 m). A hatchback tailgate includes the rear glass, so the film stops at the glass edge. Both styles fall within a length range of 163.0 in (4,140 mm) to 169.3 in (4,300 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Volvo 300 Series

A partial wrap on a Volvo 300 Series covers the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap and focus on high-wear areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volvo 300 Series: body, cut-outs and film

A Volvo 300 Series vinyl wrap is sized by its hatchback or sedan body style and its compact dimensions. The sedan measures 163.0 in (4,140 mm) to 169.3 in (4,300 mm) overall and needs about 48 ft (14.5 m) of film. The hatchback, with a similar length, needs about 49 ft (15 m). A professional installer cuts panels for each door and the bumpers to keep film use close to these figures.

Volvo 300 Series wrap ideas include a tailgate with the rear glass in it, where the film ends at the edge of the glass. On a hatchback, the rear wiper and badge come off before film is applied. Door handles and mirror bases are removed for a clean edge. A sedan has a separate trunk lid that is wrapped as one panel.

How much vinyl to wrap a Volvo 300 Series depends on the generation, but this catalog lists one generation from 1975 to 1991. For that single body set, the sedan takes about 48 ft (14.5 m) and the hatchback about 49 ft (15 m) with 60-inch cast film. Chrome or patterned film can push the amount to about 61 ft (18.5 m). An installer adds a small allowance for mistakes or complex curves.

Questions about wrapping a Volvo 300 Series

How much vinyl does it take to wrap a Volvo 300 Series?

It takes about 48 ft (14.5 m) for a sedan and 49 ft (15 m) for a hatchback, using 60-inch cast film. Chrome or patterned film raises the amount to about 61 ft (18.5 m). These figures cover the whole exterior of the first-generation Volvo 300 Series.

Which Volvo 300 Series body takes more film?

The hatchback takes more film than the sedan. A hatchback needs about 49 ft (15 m), while a sedan needs about 48 ft (14.5 m). The difference comes from the hatchback's tailgate with its larger surface.

Can I wrap only the hood or the roof of a Volvo 300 Series?

Yes, you can wrap only the hood or the roof of a Volvo 300 Series. A partial wrap on the roof, hood, or mirror caps uses less film than a full wrap. This is a good option for a focused color change or protection.

Is a Volvo 300 Series hard to wrap?

A Volvo 300 Series hatchback is slightly harder to wrap than a sedan because the tailgate has rear glass and the film ends at the edge of the glass. The compact size and simple panels are otherwise straightforward. The wrap_facts note the rear glass as the main extra step. An installer may remove the rear wiper and badges for a clean finish.