Wraps by car

Volvo 66 wrap

The Volvo 66 wrap covers the compact 1975–1979 car in vinyl wrap, with one generation in this catalog. A full wrap of the newest body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film for the sedan. The wagon needs up to 48 ft (14.5 m), and patterned or chrome film can call for about 61 ft (18.5 m).

1generations13 mof film for a full wrap

Volvo 66, first generation, factory photo
Volvo 66, first generation. Factory color shown.

Volvo 66 wrap colors and ideas

  • Volvo 66 black wrap
  • Volvo 66 white wrap
  • Volvo 66 gray wrap
  • Volvo 66 silver wrap
  • Volvo 66 red wrap
  • Volvo 66 blue wrap
  • Volvo 66 green wrap
  • Volvo 66 yellow wrap
  • Volvo 66 orange wrap
  • Volvo 66 purple wrap
  • Volvo 66 pink wrap
  • Volvo 66 teal wrap
  • Volvo 66 brown wrap
  • Volvo 66 gold wrap
  • Volvo 66 chrome wrap
  • Volvo 66 color shift wrap
  • Volvo 66 carbon fiber wrap
  • Volvo 66 camo and patterned wrap

How much vinyl to wrap a Volvo 66

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1979sedan, wagon (2 or 3 doors)153.7 in (3,904 mm)about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Volvo 66 wrap cost factors

Volvo 66 wrap cost depends on the film amount and the panel plan, not on a fixed price. The sedan takes about 43 ft (13 m) of 60-inch (1.52 m) cast film, while the wagon takes up to 48 ft (14.5 m). Chrome or patterned film raises the amount to about 61 ft (18.5 m) because of extra trimming. The tailgate glass cut-out and the compact 153.7 in (3,904 mm) body also affect labor time.

  • Film for a full wrap: about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: sedan, wagon (2 or 3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Volvo 66 wraps by generation

Swipe sideways. Tap a card for the full description.

Volvo 66, first generation, factory photo
Factory color shown

1975–1979 Volvo 66 sedan, wagon (first generation)

1975–1979sedan, wagon (2 or 3 doors)153.7 in (3,904 mm)

The first generation Volvo 66 was made from 1975 to 1979 and came as a sedan or a wagon with two or three doors. The sedan needs about 43 ft (13 m) of 60-inch (1.52 m) cast film, while the wagon needs up to 48 ft (14.5 m). The tailgate with the rear glass in it means the film ends at the edge of the glass on the wagon. The body style decides the panel plan and the film amount.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Volvo 66

A Volvo 66 partial wrap can cover the roof, hood, or mirror caps without wrapping the whole car. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full Volvo 66 wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volvo 66: body, cut-outs and film

A Volvo 66 vinyl wrap follows the sedan and wagon body styles, each with their own panel plan and film amount. The sedan measures 153.7 in (3,904 mm) long and uses about 43 ft (13 m) of 60-inch (1.52 m) cast film. The wagon adds the tailgate area and needs up to 48 ft (14.5 m). The two- and three-door layouts change how the film is cut at the rear side windows.

Volvo 66 wrap ideas must account for the tailgate with rear glass set into it, so the film ends at the edge of the glass. The wrap installer cuts carefully around that glass and trims the film at the tailgate opening. Door handles, badges, and the front grille are removed or cut out for a clean edge. The compact size keeps the panel count low, but the glass tailgate adds detail work.

If you ask how much vinyl to wrap a Volvo 66, the answer changes by body style because the wagon has more flat tailgate area. The sedan uses about 43 ft (13 m) of 60-inch (1.52 m) cast film, while the wagon uses up to 48 ft (14.5 m). A chrome or patterned film can use up to about 61 ft (18.5 m) on either body. The film amount stays close between the two- and three-door versions.

Questions about wrapping a Volvo 66

How much vinyl does it take to wrap a Volvo 66?

It takes about 43 ft (13 m) for the sedan and up to 48 ft (14.5 m) for the wagon, using 60-inch (1.52 m) cast film. The amount changes with the body style because the wagon has a larger tailgate area. Chrome or patterned film can need up to about 61 ft (18.5 m).

Which Volvo 66 body takes more film?

The wagon takes more film than the sedan. The wagon needs up to 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while the sedan needs about 43 ft (13 m). The extra tailgate area on the wagon accounts for the difference.

Can I wrap only the hood or the roof of a Volvo 66?

Yes, you can wrap only the hood or the roof of a Volvo 66. A partial wrap can cover the roof, hood, or mirror caps without wrapping the whole car. The installer measures the chosen panel and cuts the film to fit its edges.

Is a Volvo 66 hard to wrap?

No, a Volvo 66 is not hard to wrap, but the tailgate with rear glass in it adds work. The film must end at the edge of the glass, so the installer trims carefully around that opening. The car's 153.7 in (3,904 mm) length keeps the panel sizes small and manageable.