Wraps by car

Volvo Laplander wrap

The Volvo Laplander wrap page covers the first generation SUV produced from 1974 to 1987. This body-on-frame vehicle has a tall, boxy shape with three doors and a length of 210.6 in (5,350 mm). A full vinyl wrap of this generation takes about 87 ft (26.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 5 ft (1.5 m) to that estimate.

1generations26.5 mof film for a full wrap

Volvo Laplander, first generation, factory photo
Volvo Laplander, first generation. Factory color shown.

Volvo Laplander wrap colors and ideas

  • Laplander black wrap
  • Laplander white wrap
  • Laplander gray wrap
  • Laplander silver wrap
  • Laplander red wrap
  • Laplander blue wrap
  • Laplander green wrap
  • Laplander yellow wrap
  • Laplander orange wrap
  • Laplander purple wrap
  • Laplander pink wrap
  • Laplander teal wrap
  • Laplander brown wrap
  • Laplander gold wrap
  • Laplander chrome wrap
  • Laplander color shift wrap
  • Laplander carbon fiber wrap
  • Laplander camo and patterned wrap

How much vinyl to wrap a Volvo Laplander

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1987SUV (3 doors)210.6 in (5,350 mm)about 87 ft (26.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m)

Laplander wrap cost factors

Laplander wrap cost depends on the size of the vehicle and the film you choose. This SUV is 210.6 in (5,350 mm) long and 96.5 in (2,450 mm) tall, so it needs more material than a smaller car. A full wrap takes about 87 ft (26.5 m) of film, while chrome or patterned film takes about 92 ft (28 m). The height adds labor time because installers work from a platform.

  • Film for a full wrap: about 87 ft (26.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • A tall body (96.5 in (2,450 mm)): the roof is wrapped from a platform.

Laplander wraps by generation

Swipe sideways. Tap a card for the full description.

Volvo Laplander, first generation, factory photo
Factory color shown

1974–1987 Laplander SUV (first generation)

1974–1987SUV (3 doors)210.6 in (5,350 mm)

The first generation Volvo Laplander has a body height of 96.5 in (2,450 mm). The roof is wrapped from a platform, which takes more time than working at ground level. This height is typical for a military-derived SUV, and it means every roof panel requires careful positioning. The long side panels are large pieces, but the height is the main time factor.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (96.5 in (2,450 mm)): the roof is wrapped from a platform.

Film: about 87 ft (26.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).

Roof, hood, chrome delete and PPF on a Laplander

A partial wrap on a Volvo Laplander can cover the roof, hood, or mirror caps. Chrome delete on a Laplander means covering the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs are smaller than a full wrap and use less material.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volvo Laplander: body, cut-outs and film

A Volvo Laplander vinyl wrap is a large project because the vehicle is tall and long. The body stands 96.5 in (2,450 mm) high, so installers need a platform to reach the roof. The two long side doors are each wrapped as one large piece of film. The tailgate includes the rear glass, and the film ends at the edge of that glass.

Laplander wrap ideas often start with the long, flat side panels and the tall roof. The tailgate needs careful cutting around the rear glass, but the glass itself is not covered. The two side doors can be wrapped without removing handles if the installer works the film around them. The roof wrap is done from a platform due to the vehicle's height.

To figure out how much vinyl to wrap a Laplander, use the film estimate of 87 ft (26.5 m) for standard cast film. Chrome or patterned film needs about 92 ft (28 m) because of pattern matching and trim work. This page covers only the first generation, built from 1974 to 1987. There is only one generation in this catalog, so the numbers stay the same for all years.

Questions about wrapping a Volvo Laplander

How much vinyl does it take to wrap a Volvo Laplander?

It takes about 87 ft (26.5 m) of 60-inch (1.52 m) cast film to wrap a Volvo Laplander. For chrome or patterned film, plan for about 92 ft (28 m). These numbers come from the first generation body, which is 210.6 in (5,350 mm) long and 96.5 in (2,450 mm) tall.

Can I wrap only the hood or the roof of a Laplander?

Yes, you can wrap only the hood or the roof of a Laplander. Partial wrap jobs include the roof, hood, and mirror caps. You can also do chrome delete on the window trim and badges, or paint protection film on the front end.

Is a Laplander hard to wrap?

A Laplander is not especially hard to wrap, but its size adds work. The body is 96.5 in (2,450 mm) tall, so the roof is wrapped from a platform. The tailgate has rear glass in it, and the film ends at the edge of the glass. Each long side door is one large piece of film, which requires careful handling.

How many generations of the Laplander does this page cover?

This page covers one generation of the Volvo Laplander. The first generation was produced from 1974 to 1987. There is only one generation in this catalog.