Wraps by car

Volvo P1800 wrap

The Volvo P1800 wrap page covers the first generation built from 1961 to 1973 in coupe and wagon styles. A vinyl wrap on this car needs about 46 ft (14 m) for the coupe or about 52 ft (16 m) for the wagon. The figures assume 60-inch (1.52 m) cast film with a clean layout. Owners can also plan chrome or patterned film jobs up to about 67 ft (20.5 m).

1generations16 mof film for a full wrap

Volvo P1800, first generation, factory photo
Volvo P1800, first generation. Factory color shown.

Volvo P1800 wrap colors and ideas

  • Volvo P1800 black wrap
  • Volvo P1800 white wrap
  • Volvo P1800 gray wrap
  • Volvo P1800 silver wrap
  • Volvo P1800 red wrap
  • Volvo P1800 blue wrap
  • Volvo P1800 green wrap
  • Volvo P1800 yellow wrap
  • Volvo P1800 orange wrap
  • Volvo P1800 purple wrap
  • Volvo P1800 pink wrap
  • Volvo P1800 teal wrap
  • Volvo P1800 brown wrap
  • Volvo P1800 gold wrap
  • Volvo P1800 chrome wrap
  • Volvo P1800 color shift wrap
  • Volvo P1800 carbon fiber wrap
  • Volvo P1800 camo and patterned wrap

How much vinyl to wrap a Volvo P1800

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1961–1973coupe, wagon (2 or 3 doors)171.3 in (4,350 mm)about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Volvo P1800 wrap cost factors

Volvo P1800 wrap cost is set by the coupe or wagon body, the film type and the work needed around the glass and trim. The 171.3 in (4,350 mm) length and the rear glass in the tailgate add hours compared with a flat-sided car. Chrome or patterned film raises the material use to about 67 ft (20.5 m). The shop quotes by panel and by how many parts, like handles and badges, are removed for the job.

  • Film for a full wrap: about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: coupe, wagon (2 or 3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Volvo P1800 wraps by generation

Swipe sideways. Tap a card for the full description.

Volvo P1800, first generation, factory photo
Factory color shown

1961–1973 Volvo P1800 coupe, wagon (first generation)

1961–1973coupe, wagon (2 or 3 doors)171.3 in (4,350 mm)

The first-generation Volvo P1800 from 1961 to 1973 comes as a coupe or a wagon. The coupe needs about 46 ft (14 m) of 60-inch (1.52 m) film and the wagon needs about 52 ft (16 m). The style decides the panel plan, the number of cuts around the tailgate on the wagon and the amount of film for the roof. Wrappers often split the coupe into ten panels and the wagon into twelve.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Volvo P1800

A partial wrap on a Volvo P1800 can cover the roof, the hood or the mirror caps without wrapping the whole body. A chrome delete covers the window trim and the badges with black film for a cleaner line. Paint protection film (PPF) is a clear film on the front end to guard the nose and the leading edge of the hood. Each job keeps the film amount well below a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Volvo P1800: body, cut-outs and film

A Volvo P1800 vinyl wrap follows the coupe or wagon body, which is 171.3 in (4,350 mm) long over an egg-crate and curved shell. The coupe suits a single panel plan with film cut to each fender and door. The wagon adds a taller roof and a tailgate, so the film layout extends about 6 ft (2 m) more than the coupe. Wrappers treat the rear fender crease as a natural break and work from the sills upward.

Volvo P1800 wrap ideas work best when the tailgate is considered from the start. The rear glass sits inside the tailgate frame, and the film ends at the edge of the glass rather than wrapping into it. Handles, badges, door mirrors and the fuel filler come off or get cut around to keep the edges neat. The chrome trim along the beltline can be left bright or covered for a chrome delete.

How much vinyl to wrap a Volvo P1800 depends on the body style and the film finish. The coupe uses about 46 ft (14 m) of 60-inch (1.52 m) cast film, while the wagon uses about 52 ft (16 m). The catalog lists only the first generation from 1961 to 1973, so the panel count stays close across those years. A wrapper adds material for patching the front valance and the inner tailgate edges.

Questions about wrapping a Volvo P1800

How much vinyl does it take to wrap a Volvo P1800?

Yes, a Volvo P1800 takes about 46 ft (14 m) for the coupe or about 52 ft (16 m) for the wagon with 60-inch (1.52 m) cast film. The catalog's latest body from 1961 to 1973 is measured at 171.3 in (4,350 mm) long, which sets the panel plan and the seam positions. Chrome or patterned film can push the total to about 67 ft (20.5 m). A wrapper adds a little for the inner tailgate edges.

Which Volvo P1800 body takes more film?

The wagon takes more film than the coupe on a Volvo P1800. The coupe uses about 46 ft (14 m) and the wagon uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. The wagon grows because of the taller roof, the rear side glass and the tailgate with glass that stops the film at its edge. The extra material is roughly equal to one full door and a fender.

Can I wrap only the hood or the roof of a Volvo P1800?

Yes, you can wrap only the hood or the roof of a Volvo P1800. A partial wrap in the catalog covers the roof, the hood or the mirror caps as separate jobs. The hood on an 1800 is a single panel with a gentle crown, so one piece of cast film works well. The roof on the wagon is larger than the coupe, but it can still be cut and tucked at the gutters.

Is a Volvo P1800 hard to wrap?

A Volvo P1800 is moderately hard to wrap because the rear glass sits in the tailgate and the body is 171.3 in (4,350 mm) long. The film ends at the edge of the glass on the wagon, so the wrapper must trim a clean line around the whole opening. The curved front fenders and the egg-crate grille area need heat and stretch to avoid wrinkles. The coupe has fewer cut-outs, while the wagon adds the tailgate and roof rails.