Wraps by car

Wiesmann Project Thunderball wrap

The Wiesmann Project Thunderball wrap uses vinyl wrap on a modern electric sports car. This page covers the convertible body of the 2022–now generation and the film a full wrap takes. A full wrap of the newest body needs about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Wiesmann Project Thunderball, first generation, factory photo
Wiesmann Project Thunderball, first generation. Factory color shown.

Wiesmann Project Thunderball wrap colors and ideas

  • Project Thunderball black wrap
  • Project Thunderball white wrap
  • Project Thunderball gray wrap
  • Project Thunderball silver wrap
  • Project Thunderball red wrap
  • Project Thunderball blue wrap
  • Project Thunderball green wrap
  • Project Thunderball yellow wrap
  • Project Thunderball orange wrap
  • Project Thunderball purple wrap
  • Project Thunderball pink wrap
  • Project Thunderball teal wrap
  • Project Thunderball brown wrap
  • Project Thunderball gold wrap
  • Project Thunderball chrome wrap
  • Project Thunderball color shift wrap
  • Project Thunderball carbon fiber wrap
  • Project Thunderball camo and patterned wrap

How much vinyl to wrap a Wiesmann Project Thunderball

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowconvertible (2 doors)174.8 in (4,440 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Project Thunderball wrap cost factors

Project Thunderball wrap cost depends on the film type and the finish of the 174.8 in (4,440 mm) body. A color change wrap takes about 59 ft (18 m) with chrome or patterned film, which raises the material need. The installer's time is set by the long hood and the rear deck of this two-door convertible.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Project Thunderball wraps by generation

Swipe sideways. Tap a card for the full description.

Wiesmann Project Thunderball, first generation, factory photo
Factory color shown

2022–now Project Thunderball convertible (first generation)

2022–nowconvertible (2 doors)174.8 in (4,440 mm)

The open top of the Wiesmann Project Thunderball is left unwrapped because it is fabric. The film ends where the top begins, with a clean line along the body. The 2022–now generation has only this convertible top, so the wrap plan is the same for every car.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Project Thunderball

A partial wrap on a Project Thunderball covers the hood, mirror caps, or rear deck. Project Thunderball chrome delete turns the window trim and badges black with film. Paint protection film (PPF) can be applied as clear film on the front end only.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Wiesmann Project Thunderball: body, cut-outs and film

The Wiesmann Project Thunderball vinyl wrap follows the body of a 174.8 in (4,440 mm) long convertible with two doors. A convertible has a fabric top that is not wrapped, so the film ends where the top begins. The single body style keeps the cutting plan simple, but the long rear deck adds surface.

Project Thunderball wrap ideas start with the charge port door, which is wrapped as a small piece of its own. The fabric top is left uncovered and the film ends at its edge. The door handles and badges are removed or cut around for a clean finish.

To know how much vinyl to wrap a Project Thunderball, measure the convertible body of 174.8 in (4,440 mm). This model has one generation, so the panel sizes stay the same across 2022–now cars. The estimate of about 52 ft (16 m) fits every year of this body.

Questions about wrapping a Wiesmann Project Thunderball

How much vinyl does it take to wrap a Wiesmann Project Thunderball?

A full wrap of a Wiesmann Project Thunderball takes about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl. Chrome or patterned film raises the figure to about 59 ft (18 m) for this convertible body.

Is the top of a Project Thunderball wrapped?

The top of a Project Thunderball is not wrapped because it is a fabric convertible top. The vinyl film ends where the top meets the body, so only the painted panels are covered.

Can I wrap only the hood or the roof of a Project Thunderball?

Yes, you can wrap only the hood, mirror caps, or rear deck of a Project Thunderball. A chrome delete on the window trim and badges is also a smaller job than a full wrap, and paint protection film can cover just the front end.

Is a Project Thunderball hard to wrap?

A Project Thunderball is not hard to wrap, but the charge port door adds a small separate piece. The 174.8 in (4,440 mm) long body has wide rear haunches that need careful stretching, and the fabric top edge must be trimmed cleanly.