Wraps by car

Wiesmann Roadster wrap

The Wiesmann Roadster wrap page covers the 1996–2013 first generation of this two-door convertible. A vinyl wrap for the Wiesmann Roadster is a full color change using cast film. This sports car measures 152.0 in (3,860 mm) long. A complete wrap takes about 36 ft (11 m) of 60-inch (1.52 m) cast film, or about 43 ft (13 m) for chrome or patterned film.

1generations11 mof film for a full wrap

Wiesmann Roadster, first generation, factory photo
Wiesmann Roadster, first generation. Factory color shown.

Wiesmann Roadster wrap colors and ideas

  • Roadster black wrap
  • Roadster white wrap
  • Roadster gray wrap
  • Roadster silver wrap
  • Roadster red wrap
  • Roadster blue wrap
  • Roadster green wrap
  • Roadster yellow wrap
  • Roadster orange wrap
  • Roadster purple wrap
  • Roadster pink wrap
  • Roadster teal wrap
  • Roadster brown wrap
  • Roadster gold wrap
  • Roadster chrome wrap
  • Roadster color shift wrap
  • Roadster carbon fiber wrap
  • Roadster camo and patterned wrap

How much vinyl to wrap a Wiesmann Roadster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2013convertible (2 doors)152.0 in (3,860 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m)

Roadster wrap cost factors

Roadster wrap cost depends on the film type, the size of the car, and the labor for its body. The Wiesmann Roadster is 152.0 in (3,860 mm) long, a compact two-door convertible. A full wrap uses about 36 ft (11 m) of cast film, or about 43 ft (13 m) for chrome or patterned film. The fabric or folding hard top and the need to remove small parts add labor time.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Roadster wraps by generation

Swipe sideways. Tap a card for the full description.

Wiesmann Roadster, first generation, factory photo
Factory color shown

1996–2013 Roadster convertible (first generation)

1996–2013convertible (2 doors)152.0 in (3,860 mm)

The first generation Wiesmann Roadster was built from 1996 to 2013 as a two-door convertible. If the top is fabric, it is not wrapped and the film ends where the top begins. If it is a folding hard top, that top is wrapped as panels of its own. On this open body, the film edges must be sealed cleanly around the roof opening.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 43 ft (13 m).

Roof, hood, chrome delete and PPF on a Roadster

For a partial wrap on a Wiesmann Roadster, you can cover the hood, mirror caps, and rear deck. Roadster chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is another smaller job. These options reduce the amount of film needed compared to a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Wiesmann Roadster: body, cut-outs and film

A Wiesmann Roadster vinyl wrap must follow the compact convertible body closely. The car is 152.0 in (3,860 mm) long and has only two doors. Because the roof is fabric or a folding hard top, the wrap is planned around the opening. The 60-inch (1.52 m) film width suits the Roadster's panels without excessive waste.

Roadster wrap ideas include a full color change, partial coverage, and chrome delete. The convertible top is not wrapped, so the film ends where the top begins. Door handles, mirrors, and badges are removed to wrap cleanly around them. Any trim around the windows and lights needs careful cut-outs.

To know how much vinyl to wrap a Roadster, compare the film estimate for the first generation. The catalog lists only one generation, 1996–2013, so the figures stay the same. A full wrap of the 152.0 in (3,860 mm) long body uses about 36 ft (11 m) of standard cast film. If you choose chrome or patterned film, plan for about 43 ft (13 m).

Questions about wrapping a Wiesmann Roadster

How much vinyl does it take to wrap a Wiesmann Roadster?

It takes about 36 ft (11 m) of 60-inch (1.52 m) cast film to wrap a Wiesmann Roadster. For chrome or patterned film, plan on about 43 ft (13 m). These figures are for the 1996–2013 first generation, the only one in the catalog.

Is the top of a Roadster wrapped?

No, the top of a Wiesmann Roadster is not wrapped when it is fabric. The film ends where the fabric top begins. If the car has a folding hard top, that top is wrapped as panels of its own.

Can I wrap only the hood or the roof of a Roadster?

Yes, you can wrap only the hood or the rear deck of a Wiesmann Roadster. A partial wrap can cover the hood, mirror caps, and rear deck. Paint protection film (PPF) on the front end is another option.

Is a Roadster hard to wrap?

A Wiesmann Roadster adds work because of its convertible body and small parts. The fabric top must be left unwrapped, so the film edges need careful finishing. Door handles, mirrors, and badges are removed for a clean wrap. The car's 152.0 in (3,860 mm) length is compact, but the two-door body still demands precise panel alignment.