Wraps by car

Linxys Mini EV wrap

This page covers the Linxys Mini EV wrap, a vinyl wrap applied to the 2022–now car. The Mini EV has one generation in the catalog. A full wrap of the newest body takes about 36 ft (11 m) of 60-inch film for the convertible and 39 ft (12 m) for the hatchback.

1generations11 mof film for a full wrap

Linxys Mini EV, first generation, factory photo
Linxys Mini EV, first generation. Factory color shown.

Linxys Mini EV wrap colors and ideas

  • Mini EV black wrap
  • Mini EV white wrap
  • Mini EV gray wrap
  • Mini EV silver wrap
  • Mini EV red wrap
  • Mini EV blue wrap
  • Mini EV green wrap
  • Mini EV yellow wrap
  • Mini EV orange wrap
  • Mini EV purple wrap
  • Mini EV pink wrap
  • Mini EV teal wrap
  • Mini EV brown wrap
  • Mini EV gold wrap
  • Mini EV chrome wrap
  • Mini EV color shift wrap
  • Mini EV carbon fiber wrap
  • Mini EV camo and patterned wrap

How much vinyl to wrap a Linxys Mini EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowconvertible, hatchback (2 or 3 doors)114.8 in (2,917 mm)about 36 ft (11 m) for the convertible to 39 ft (12 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 46 ft (14 m)

Mini EV wrap cost factors

Mini EV wrap cost depends on the body style, the film type, and the amount of film needed. The convertible uses about 36 ft (11 m) of 60-inch cast film, while the hatchback uses about 39 ft (12 m). Chrome or patterned film can push the figure up to about 46 ft (14 m). A wrap with cut-outs around the charge port door and rear glass adds labor time.

  • Film for a full wrap: about 36 ft (11 m) for the convertible to 39 ft (12 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 46 ft (14 m).
  • Body: convertible, hatchback (2 or 3 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Mini EV wraps by generation

Swipe sideways. Tap a card for the full description.

Linxys Mini EV, first generation, factory photo
Factory color shown

2022–now Mini EV convertible, hatchback (first generation)

2022–nowconvertible, hatchback (2 or 3 doors)114.8 in (2,917 mm)

The first generation Linxys Mini EV has an open top that is not wrapped. On the convertible body, the fabric top is left uncovered and the film ends where the top begins. A folding hard top, if fitted, is wrapped as panels of its own. This keeps the wrap edge clean and avoids damage to the top mechanism.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 36 ft (11 m) for the convertible to 39 ft (12 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Mini EV

A partial wrap on the Linxys Mini EV covers the roof, hood, or mirror caps without wrapping the whole car. For a Mini EV chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Linxys Mini EV: body, cut-outs and film

The Linxys Mini EV vinyl wrap is shaped by the car's two body styles and its 114.8 in (2,917 mm) length. The convertible and the two- or three-door hatchback both need careful film layout around their short panels. The small size means fewer seams on the largest panels. The hatchback's closed roof uses more film than the open convertible.

Mini EV wrap ideas start with the parts that need cut-outs or come off. The electric car's charge port door is wrapped as a small piece of its own. On a hatchback, the film ends at the edge of the rear glass in the tailgate. The fabric top of the convertible is not wrapped, so the film ends where the top begins.

To know how much vinyl to wrap a Mini EV, you compare the film estimate of each body. The convertible takes about 36 ft (11 m) of 60-inch cast film. The hatchback takes about 39 ft (12 m) of the same film. If you choose chrome or patterned film, allow up to about 46 ft (14 m).

Questions about wrapping a Linxys Mini EV

How much vinyl does it take to wrap a Linxys Mini EV?

It takes about 36 ft (11 m) to 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a Linxys Mini EV. The convertible body uses about 36 ft (11 m), while the hatchback uses about 39 ft (12 m). For chrome or patterned film, allow up to about 46 ft (14 m).

Is the top of a Mini EV wrapped?

No, the top of a Linxys Mini EV is not wrapped when it is a fabric convertible top. The film ends where the fabric top begins, so the top stays uncovered. A folding hard top, if the car has one, is wrapped as panels of its own.

Which Mini EV body takes more film?

The hatchback body of the Linxys Mini EV takes more film than the convertible. The hatchback needs about 39 ft (12 m) of 60-inch cast film, while the convertible needs about 36 ft (11 m). The closed roof of the hatchback adds to the film area.

Can I wrap only the hood or the roof of a Mini EV?

Yes, you can wrap only the hood or the roof of a Linxys Mini EV. A partial wrap can cover the roof, hood, or mirror caps. These smaller jobs use less film than a full wrap of the car.