A Xpeng G3 wrapped in green starts with the finish you want, then the film brand and color-change coverage. Matte and satin greens look flat and modern, while gloss greens reflect more light and look closer to new paint. The G3's body size and simple SUV shape make a full wrap a straightforward two-piece job for the roof and body sides. Decide early whether the door jambs and tailgate opening will be wrapped, because that changes the film amount and labor.

The factory paint does not need to be perfect before you wrap the Xpeng G3, but chips and scratches can show through a thin film. A light sanding and cleaning removes dust and wax that would otherwise create tiny bubbles. On the G3, the tailgate glass sits in the tailgate, so the film ends at the glass edge and no seams are needed there. The film estimate allows for seams at the bumpers and around the charge port door.

The green wrap is removable, so hand washing with mild soap and a soft mitt is enough to keep it clean. Avoid automatic car washes with brushes, because the brushes can lift an edge of the film. The G3 is an electric car, so keep water away from the charge port area when you wash it. If you decide to remove the wrap later, use a heat gun and pull slowly to reduce the chance of leaving adhesive behind.