Wraps by car

Xpeng G3 wrap

The Xpeng G3 wrap page covers the first generation of this electric SUV, produced from 2018 to 2021. A full vinyl wrap on the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the amount rises to about 67 ft (20.5 m). The G3 has one generation in this catalog.

1generations18 mof film for a full wrap

Xpeng G3, first generation, factory photo
Xpeng G3, first generation. Factory color shown.

Xpeng G3 wrap colors and ideas

  • Xpeng G3 black wrap
  • Xpeng G3 white wrap
  • Xpeng G3 gray wrap
  • Xpeng G3 silver wrap
  • Xpeng G3 red wrap
  • Xpeng G3 blue wrap
  • Xpeng G3 green wrap
  • Xpeng G3 yellow wrap
  • Xpeng G3 orange wrap
  • Xpeng G3 purple wrap
  • Xpeng G3 pink wrap
  • Xpeng G3 teal wrap
  • Xpeng G3 brown wrap
  • Xpeng G3 gold wrap
  • Xpeng G3 chrome wrap
  • Xpeng G3 color shift wrap
  • Xpeng G3 carbon fiber wrap
  • Xpeng G3 camo and patterned wrap

How much vinyl to wrap a Xpeng G3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–2021SUV (5 doors)175.2 in (4,450 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Xpeng G3 wrap cost factors

The Xpeng G3 wrap cost depends on how much film the job uses and how many hours the installer works on the car. A full wrap of the first generation takes about 59 ft (18 m) of cast film, but chrome or patterned film can push that to 67 ft (20.5 m). The 175.2 in (4,450 mm) long SUV body has large panels that take time to trim around the glass. Cut-outs for the charge port and the tailgate glass add labor, so a shop quotes each G3 by the job.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Xpeng G3 wraps by generation

Swipe sideways. Tap a card for the full description.

Xpeng G3, first generation, factory photo
Factory color shown

2018–2021 Xpeng G3 SUV (first generation)

2018–2021SUV (5 doors)175.2 in (4,450 mm)

The first generation Xpeng G3 is a five-door SUV that is 175.2 in (4,450 mm) long. Its tall body and rear hatch increase the number of square feet to cover compared with a lower car. The wrap film is divided into panels for the roof, hood, four doors, front fenders, rear quarter panels, bumpers, and the tailgate. The tailgate film ends at the glass, which reduces film waste on that panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Xpeng G3

A partial wrap on the Xpeng G3 can cover the roof, the hood, or the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that can be applied to the front end only. These jobs use less film than a full wrap and can be done on the 175.2 in (4,450 mm) SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Xpeng G3: body, cut-outs and film

An Xpeng G3 vinyl wrap follows the body of a five-door SUV that is 175.2 in (4,450 mm) long. The tall sides and rear hatch add surface area compared with a sedan of the same length. The wrap is cut into panels for the roof, hood, doors, fenders, bumpers, and tailgate. Each panel is trimmed at its edges so the film ends cleanly.

For Xpeng G3 wrap ideas, the tailgate has the rear glass set into it, so the film ends at the edge of the glass. The charge port door is wrapped as a small piece of its own because this is an electric car. Door handles, badges, and trim are removed before the film is applied. The mirrors are covered in one piece when the film can stretch around the cap.

When you count how much vinyl to wrap a Xpeng G3, the first generation has only one body style. The length of 175.2 in (4,450 mm) and the SUV shape set the size of every panel. There are no earlier or later G3 bodies in this catalog to compare. The same film estimate applies to all years from 2018 to 2021.

Questions about wrapping a Xpeng G3

How much vinyl does it take to wrap a Xpeng G3?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl to wrap a Xpeng G3. The figure comes from the film estimate for the newest, first-generation body of this SUV. If you choose chrome or patterned film, the amount is about 67 ft (20.5 m) because those films need extra material for pattern matching. The charge port and tailgate glass are included in the estimate.

Can I wrap only the hood or the roof of a Xpeng G3?

Yes, you can wrap only the hood or the roof of a Xpeng G3. The hood is a single panel that takes a small amount of film, and the roof can be done on its own. The partial wrap jobs for this SUV also include the mirror caps. A chrome delete is another small job that covers only the window trim and badges.

Is a Xpeng G3 hard to wrap?

A Xpeng G3 is not especially hard to wrap, but the tailgate glass and the charge port door add work. The film on the tailgate has to end neatly at the edge of the rear glass. The charge port door is wrapped as a small separate piece. The SUV body is 175.2 in (4,450 mm) long, so the roof and sides are large panels that need careful handling.

How many generations of the Xpeng G3 does this page cover?

This page covers one generation of the Xpeng G3. The first generation was produced from 2018 to 2021. There is no earlier or later G3 generation in this catalog. The body is a five-door SUV that is 175.2 in (4,450 mm) long.